1. Asaraldehyde

Asaraldehyde  (Synonyms: Asaronaldehyde; Asaraldehyde; 2,4,5-trimethoxy-Benzaldehyde)

Cat. No.: HY-100580 Purity: 99.83%
COA Handling Instructions

Asarylaldehyde (Asaronaldehyde), a COX-2 inhibitor, significantly inhibits cyclooxygenase II (COX-2) activity with an IC50 value of 100 μg/mL.

For research use only. We do not sell to patients.

Asaraldehyde Chemical Structure

Asaraldehyde Chemical Structure

CAS No. : 4460-86-0

Size Price Stock Quantity
Free Sample (0.1 - 0.5 mg)   Apply Now  
1 g USD 25 In-stock
5 g USD 50 In-stock
10 g   Get quote  
50 g   Get quote  

* Please select Quantity before adding items.

This product is a controlled substance and not for sale in your territory.

Top Publications Citing Use of Products
  • Biological Activity

  • Protocol

  • Purity & Documentation

  • Customer Review

Description

Asarylaldehyde (Asaronaldehyde), a COX-2 inhibitor, significantly inhibits cyclooxygenase II (COX-2) activity with an IC50 value of 100 μg/mL[1].

IC50 & Target

IC50: 100 μg/mL (COX-2)[1]

In Vitro

Asarylaldehyde (2,4,5-TMBA) is a natural COX-2 inhibitor, which isolated from carrot (Daucus carota L.) seeds significantly inhibits cyclooxygenase II (COX-2) activity at the concentration of 100 μg/mL compared to three commercial nonsteroidal anti-inflammatory drugs Aspinin, Ibuprofen, and Naproxen at their IC50 values 180, 2.52, and 2.06 μg/mL, respectively. 2,4,5-TMBA, a natural inhibitor of cyclooxygenase-2, suppresses adipogenesis and oromotes lipolysis in 3T3-L1 adipocytes. 2,4,5-Trimethoxybenzaldehyde (2,4,5-TMBA) present in plant roots, seeds, and leaves is reported to be a significant inhibitor of cyclooxygenase-2 (COX-2) activity at the concentration of 100 μg/mL. Because COX-2 is associated with differentiation of preadipocytes, the murine 3T3-L1 cells are cultured with 100 μg/mL of 2,4,5-TMBA during differentiation and after the cells are fully differentiated to study the effect of 2,4,5-TMBA on adipogenesis and lipolysis. Oil Red O staining and triglyceride assay revealed that 2,4,5-TMBA inhibited the formation of lipid droplets during differentiation; moreover, 2,4,5-TMBA down-regulated the protein levels of adipogenic signaling molecules and transcription factors MAP kinase kinase (MEK), extracellular signal-regulated kinase (ERK), CCAAT/enhancer binding protein (C/EBP)α, β, and δ, peroxisome proliferator-activated receptor (PPAR)γ, adipocyte determination and differentiation-dependent factor 1 (ADD1), and the rate-limiting enzyme for lipid synthesis acetyl-CoA carboxylase (ACC). In fully differentiated adipocytes, treatment with 2,4,5-TMBA for 72 h significantly decreased lipid accumulation by increasing the hydrolysis of triglyceride through suppression of perilipin A (lipid droplet coating protein) and up-regulation of hormone-sensitive lipase (HSL). When treated with 100 μg/mL of 2,4,5-TMBA for 24, 48, or 72 h, the viability of fully differentiated 3T3-L1 adipocytes is decreased by 8.35, 15.54, and 27.26%, respectively. When the preadiocytes are treated with 100 μg/mL of 2,4,5-TMBA for 24 h before differentiation medium is supplemented, the cell viability is decreased by 26.46%[1]. A COX-2 inhibitor 2,4,5-trimethoxybenzaldehyde (TMBA) is found to be the most abundant constituent, but is totally absent in its cultured broth and its natural host, C. kanehirae wood. 2,4,5-trimethoxybenzaldehyde (TMBA) is the major constituent in fruiting bodies[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Molecular Weight

196.20

Formula

C10H12O4

CAS No.
Appearance

Solid

Color

White to off-white

SMILES

O=CC1=CC(OC)=C(OC)C=C1OC

Shipping

Room temperature in continental US; may vary elsewhere.

Storage

4°C, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

Solvent & Solubility
In Vitro: 

DMSO : 100 mg/mL (509.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Ethanol : 50 mg/mL (254.84 mM; Need ultrasonic)

H2O : < 0.1 mg/mL (insoluble)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 5.0968 mL 25.4842 mL 50.9684 mL
5 mM 1.0194 mL 5.0968 mL 10.1937 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% EtOH    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 3.75 mg/mL (19.11 mM); Clear solution

    This protocol yields a clear solution of ≥ 3.75 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (37.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% EtOH    90% Corn Oil

    Solubility: ≥ 3.75 mg/mL (19.11 mM); Clear solution

    This protocol yields a clear solution of ≥ 3.75 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (37.5 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation

Purity: 99.83%

Cell Assay
[1]

3T3-L1 preadipocytes are seeded into 6-well plates at a concentration of 105/well and cultured in DMEM supplemented with 10% bovine calf serum at 37°C in a humidified atmosphere containing 5% CO2. Two days after confluence, cells are cultured in FBS-containing DMEM (10%, v/v) with the addition of adipogenic factors (0.5 mM IBMX, 1 μM DEX, 5 μg/mL insulin) to induce differentiation (Day 0). Two days later (Day 2), the medium is changed to DMEM supplemented with 10% FBS and 5 μg/mL insulin for another two days. Afterward (Day 4), the medium is changed to DMEM supplemented with 10% FBS only. For the coculture study, 2,4,5-TMBA (0.1 g dissolved in 2 mL of DMSO) is added to the medium from Day 0 to Day 8 (final concentration 100 μg/mL). Control samples are prepared by adding isovolumetric DMSO to the culture medium. For the postculture study, 2,4,5-TMBA is added to the medium on Day 8 (when the cells are fully differentiated) at a final concentration of 100 μg/mL, followed by another 72 h culture. 3T3-L1 cells are seeded in 96-well plates at a concentration of 104/well. Twenty-four hours after seeding, the cells are treated with 100 μg/mL of 2,4,5-TMBA for 24 h or for the whole 8-day differentiation period. Fully differentiated adipocytes are also treated with 100 μg/mL of 2,4,5-TMBA for 24-72 h to test the cytotoxicity. At the end of treatment, cells are cultured with MTT at a final concentration of 0.5 mg/mL for another 4 h. The purple MTT formazan is dissolved by DMSO and the absorbance at 570 nm is taken with a spectrophotometer. The absorbance is proportional to the viability of adipocytes[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
Ethanol / DMSO 1 mM 5.0968 mL 25.4842 mL 50.9684 mL 127.4210 mL
5 mM 1.0194 mL 5.0968 mL 10.1937 mL 25.4842 mL
10 mM 0.5097 mL 2.5484 mL 5.0968 mL 12.7421 mL
15 mM 0.3398 mL 1.6989 mL 3.3979 mL 8.4947 mL
20 mM 0.2548 mL 1.2742 mL 2.5484 mL 6.3711 mL
25 mM 0.2039 mL 1.0194 mL 2.0387 mL 5.0968 mL
30 mM 0.1699 mL 0.8495 mL 1.6989 mL 4.2474 mL
40 mM 0.1274 mL 0.6371 mL 1.2742 mL 3.1855 mL
50 mM 0.1019 mL 0.5097 mL 1.0194 mL 2.5484 mL
60 mM 0.0849 mL 0.4247 mL 0.8495 mL 2.1237 mL
80 mM 0.0637 mL 0.3186 mL 0.6371 mL 1.5928 mL
100 mM 0.0510 mL 0.2548 mL 0.5097 mL 1.2742 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Your Recently Viewed Products:

Inquiry Online

Your information is safe with us. * Required Fields.

Product Name

 

Salutation

Applicant Name *

 

Email Address *

Phone Number *

 

Organization Name *

Department *

 

Requested quantity *

Country or Region *

     

Remarks

Bulk Inquiry

Inquiry Information

Product Name:
Asaraldehyde
Cat. No.:
HY-100580
Quantity:
MCE Japan Authorized Agent: