1. Others
  2. Others
  3. Eliglustat hemitartrate

Eliglustat hemitartrate  (Synonyms: Genz-112638; Eliglustat tartrate)

Cat. No.: HY-14885A Purity: 99.83%
COA Handling Instructions

Eliglustat hemitartrate is an specific, potent and orally active glucocerebroside synthase inhibitor with an IC50 of 24 nM.

For research use only. We do not sell to patients.

Eliglustat hemitartrate Chemical Structure

Eliglustat hemitartrate Chemical Structure

CAS No. : 928659-70-5

Size Price Stock Quantity
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
USD 167 In-stock
Solution
10 mM * 1 mL in DMSO USD 167 In-stock
Solid
1 mg USD 66 In-stock
5 mg USD 119 In-stock
10 mg USD 158 In-stock
50 mg USD 317 In-stock
100 mg USD 581 In-stock
200 mg   Get quote  
500 mg   Get quote  

* Please select Quantity before adding items.

This product is a controlled substance and not for sale in your territory.

Customer Review

Based on 10 publication(s) in Google Scholar

Other Forms of Eliglustat hemitartrate:

Top Publications Citing Use of Products

    Eliglustat hemitartrate purchased from MedChemExpress. Usage Cited in: EMBO J. 2022 Dec 12;e110553.  [Abstract]

    Eliglustat (1, 2 μM; 6 days) strongly promotes TGF-β-induced SMAD2 phosphorylation in A549-VIM-RFP cells. Eliglustat incubate for 4 days and then treat with TGF-β or vehicle control for another 2 days.
    • Biological Activity

    • Protocol

    • Purity & Documentation

    • References

    • Customer Review

    Description

    Eliglustat hemitartrate is an specific, potent and orally active glucocerebroside synthase inhibitor with an IC50 of 24 nM.

    IC50 & Target

    IC50: 24 nM (glucocerebroside synthase)[1]

    In Vitro

    Eliglustat tartrate shows good potency with an IC50 of 24 nM and specificity against the target enzyme[1].Incubating K562 or B16/F10 cells for 72 h with increasing amounts of Genz-112638 (0.6-1000 nM) results in a dose-dependent reduction of cell surface levels of both GM1 and GM3. The mean IC50 value for inhibiting the cell surface presentation of GM1 in K562 cells was 24 nM (range 14-34 nM) and that for GM3 in B16/F10 cells was 29 nM (range 12-48 nM)[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    In Vivo

    Mice that received drug prior to significant accumulation of substrate (10 weeks of age) showed reduced levels of glucosylceramide and number of Gaucher cells in the spleen, lung and liver when compared to age-matched control animals[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Clinical Trial
    Molecular Weight

    959.17

    Formula

    C50H78N4O14

    CAS No.
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    CCCCCCCC(N[C@H](CN1CCCC1)[C@@H](C2=CC=C(OCCO3)C3=C2)O)=O.CCCCCCCC(N[C@H](CN4CCCC4)[C@@H](C5=CC=C(OCCO6)C6=C5)O)=O.O=C(O)[C@H](O)[C@@H](O)C(O)=O

    Shipping

    Room temperature in continental US; may vary elsewhere.

    Storage

    4°C, sealed storage, away from moisture

    *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

    Solvent & Solubility
    In Vitro: 

    DMSO : 100 mg/mL (104.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    H2O : ≥ 50 mg/mL (52.13 mM)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.0426 mL 5.2128 mL 10.4257 mL
    5 mM 0.2085 mL 1.0426 mL 2.0851 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.75 mg/mL (2.87 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.75 mg/mL (2.87 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  PBS

      Solubility: 150 mg/mL (156.39 mM); Clear solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
    Purity & Documentation

    Purity: 99.83%

    References
    Cell Assay
    [1]

    The inhibitory activity of Genz-112638 is determined indirectly by measuring its effect on the cell surface levels of the gangliosides GM1 and GM3 on either K562 or B16/F10 cells. GM1 levels on the K562 cells are determined by incubating the cells with increasing amounts of Genz-112638 (0.6-1000 nM) for 72 h after which the cells are harvested and stained using 10 μg of recombinant cholera toxin-FITC in 100 μL phosphate buffered saline (PBS) containing 0.5% bovine serum albumin (BSA) for 30 min on ice. Cells are ished, resuspended in PBS containing 0.5% BSA and the fluorescence quantitated[1].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Administration
    [1]

    Mice: Eliglustat hemitartrate is dissolved in water for injection and administered in a dose escalation from 75 mg/kg/day to 150 mg/kg/day over the course of nine days, with three days at each dose and increments of 25 mg/kg/day. Mice are weighed three times per week to monitor the potential impact of the drug on their overall health. Animals are killed by carbon dioxide inhalation[1].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    References

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    H2O / DMSO 1 mM 1.0426 mL 5.2128 mL 10.4257 mL 26.0642 mL
    5 mM 0.2085 mL 1.0426 mL 2.0851 mL 5.2128 mL
    10 mM 0.1043 mL 0.5213 mL 1.0426 mL 2.6064 mL
    15 mM 0.0695 mL 0.3475 mL 0.6950 mL 1.7376 mL
    20 mM 0.0521 mL 0.2606 mL 0.5213 mL 1.3032 mL
    25 mM 0.0417 mL 0.2085 mL 0.4170 mL 1.0426 mL
    30 mM 0.0348 mL 0.1738 mL 0.3475 mL 0.8688 mL
    40 mM 0.0261 mL 0.1303 mL 0.2606 mL 0.6516 mL
    50 mM 0.0209 mL 0.1043 mL 0.2085 mL 0.5213 mL
    DMSO 60 mM 0.0174 mL 0.0869 mL 0.1738 mL 0.4344 mL
    80 mM 0.0130 mL 0.0652 mL 0.1303 mL 0.3258 mL
    100 mM 0.0104 mL 0.0521 mL 0.1043 mL 0.2606 mL

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    Eliglustat hemitartrate Related Classifications

    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Your Recently Viewed Products:

    Inquiry Online

    Your information is safe with us. * Required Fields.

    Product Name

     

    Salutation

    Applicant Name *

     

    Email Address *

    Phone Number *

     

    Organization Name *

    Department *

     

    Requested quantity *

    Country or Region *

         

    Remarks

    Bulk Inquiry

    Inquiry Information

    Product Name:
    Eliglustat hemitartrate
    Cat. No.:
    HY-14885A
    Quantity:
    MCE Japan Authorized Agent: