ML241 hydrochloride
Based on 1 Customer Validation
ML241 hydrochloride is a potent p97 inhibitor, inhibiting p97 ATPase with IC50 value of 100 nM.
For research use only. We do not sell to patients.
- Purity: 99.72%
- CAS No.: 2070015-13-1
- Formula: C23H25ClN4O
- Molecular Weight:408.92
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Protocol
- Purity & Documentation
- References
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Ubiquitination Compound Library
HY-L050
-
Endoplasmic Reticulum Stress Compound Library
HY-L054
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
-
Cell Cycle/DNA Damage Compound Library
HY-L004
Biological Activity
IC50: 100 nM (p97)[1]
ML241 hydrochloride is a potent p97 inhibitor, inhibiting p97 ATPase with IC50 values of 100 nM. ML241 inhibits p97 competitively with respect to ATP with a Ki values of 0.35 μM. ML241 (20 μM) shows no obvious inhibition of the appr 170 kinases tested. ML241 stabilizes UbG76V-GFP with IC50 of 3.5 μM[1]. ML241 is cytotoxic to HCT15 and SW403 cells, with GI50s of 53 and 33 μM after treatment for 24 h, and 13 and 12 μM after treatment for 72 h, respectively[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2070015-13-1
-
Appearance Solid
-
Molecular Weight 408.92
-
Formula C23H25ClN4O
-
Color White to off-white
-
SMILES
Cl[H].C1(N2C3=CC=CC=C3OCC2)=NC(NCC4=CC=CC=C4)=C5CCCCC5=N1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : ≥ 34 mg/mL (83.15 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
HeLa cells stably expressing ODD-luciferase are seeded onto a 96-well white solid bottom plate (5000 cells/well) and cells are grown for 16 h. Cells are treated with DMEM containing MG132 (4 μM) for 1h and washed with 100 μL PBS twice. DMEM containing 2.5% FBS, cycloheximide (50 μg/mL) and ML241 are added into the well. Four 96-well plates are prepared and one of the plates is taken out from incubator at each time point (70, 90, 120, or 150 min). Luciferin (50 μL of 1 mg/mL in PBS) is added into each well containing 50 μL of medium and incubated at room temperature with shaking at 500 rpm for 5 min. Luminescence intensity is determined with 0.1 ms integration time on the Synergy HT Microplate Reader[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Chou TF, et al. Structure-activity relationship study reveals ML240 and ML241 as potent and selective inhibitors of p97 ATPase. ChemMedChem. 2013 Feb;8(2):297-312. [Content Brief]
[2]. Chou TF, et al. Selective, reversible inhibitors of the AAA ATPase p97. Probe Reports from the NIH Molecular Libraries Program. April 14, 2011. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4455 mL | 12.2273 mL | 24.4547 mL | 61.1367 mL |
| 5 mM | 0.4891 mL | 2.4455 mL | 4.8909 mL | 12.2273 mL | |
| 10 mM | 0.2445 mL | 1.2227 mL | 2.4455 mL | 6.1137 mL | |
| 15 mM | 0.1630 mL | 0.8152 mL | 1.6303 mL | 4.0758 mL | |
| 20 mM | 0.1223 mL | 0.6114 mL | 1.2227 mL | 3.0568 mL | |
| 25 mM | 0.0978 mL | 0.4891 mL | 0.9782 mL | 2.4455 mL | |
| 30 mM | 0.0815 mL | 0.4076 mL | 0.8152 mL | 2.0379 mL | |
| 40 mM | 0.0611 mL | 0.3057 mL | 0.6114 mL | 1.5284 mL | |
| 50 mM | 0.0489 mL | 0.2445 mL | 0.4891 mL | 1.2227 mL | |
| 60 mM | 0.0408 mL | 0.2038 mL | 0.4076 mL | 1.0189 mL | |
| 80 mM | 0.0306 mL | 0.1528 mL | 0.3057 mL | 0.7642 mL |
ML241 hydrochloride Related Classifications
HY-19797A Related Classifications
Powered by Bioz