Biologie des protéines

Proteins are the building blocks of life. Protein analysis methods include a wide range of techniques for the protein preparation, protein purification and protein detection. MCE supports your protein research with inhibitor cocktails, protein purification resins/magnetic beads, and reliable protein electrophosis and Western Blotting products.

Préparation d'échantillons de protéines (22)

Lyse cellulaire (6)

Cat. No.: HY-K1001 RIPA Lysis Buffer (Strong)

MCE RIPA Lysis Buffer is one of the most reliable buffers used to lyse cells from both cultured cells and tissues.

Cat. No.: HY-K1002 NP-40 Lysis Buffer

MCE NP-40 Lysis Buffer is a relatively mild reliable buffers used to lyse cells from animal, plant tissue and fungi, bacteria etc.

Cat. No.: HY-K1003 Mammalian Active Protein Extraction Reagent

MCE Mammalian Active Protein Extraction Reagent are gentle, non-denaturing detergents designed for the rapid, high-quality, and high-activity extraction of cytoplasmic, nuclear, and membrane proteins from mammalian cells or tissues. The 100 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1000 WB/IP Lysis Buffer

MCE WB/IP Lysis Buffer is a lysis buffer used to lyse cell or tissue samples under non-denaturing conditions to prepare protein samples. The lysed cell or tissue samples can be used for PAGE, Western Blot, Immunoprecipitation (IP), Co-Immunoprecipitation (Co-IP), ELISA, and other assays.

Cat. No.: HY-K3010 Red Blood Cell Lysis Buffer (10×)

MCE Red Blood Cell Lysis Buffer (10×) primarily contains ammonium chloride and is a ready-to-use solution designed for rapid and effective lysis and removal of anucleated red blood cells from human or mouse blood and tissue samples without affecting white blood cells, normal tissues, or tumor cells.

Cat. No.: HY-K0002 Bacterial Protein Extraction Reagent

MCE Bacterial Protein Extraction Reagent integrates both lysozyme and nuclease activities and is specifically formulated for E. coli lysis. It efficiently disrupts the peptidoglycan layer under mild conditions to rapidly release intracellular proteins. Simultaneously, the incorporated nucleases degrade genomic DNA/RNA, significantly reducing lysate viscosity and minimizing nucleic-acid interference, thereby preserving the native conformation and functional integrity of target proteins to the greatest extent.

Tampon de lavage (3)

Cat. No.: HY-K1023 PBS Powder (1 L of 1×)

MCE PBS Powder (1 L of 1×) consists of NaCl, KCl and Phosphate, and is widely used in immunoassay, microbiology and protein experiments. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1024 PBS Powder (2 L of 1×)

MCE PBS Powder (2 L of 1×) consists of NaCl, KCl and Phosphate, and is widely used in immunoassay, microbiology and protein experiments. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1026 TBS Powder (1 L of 1×)

MCE TBS Powder (1 L of 1×) consists of NaCl, KCl and Tris, and is widely used as washing buffer in immunocytochemistry, FISH or ELISA, and can also be used for antibody dilution and preparation of blocking solution. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cocktail d'inhibiteurs de protéase (5)

Cat. No.: HY-K0010 Protease Inhibitor Cocktail (EDTA-Free, 100× in DMSO)

MCE Protease Inhibitor Cocktail (EDTA-Free, 100× in DMSO) is a blend of 6 pan-protease inhibitors for protection of protein integrity.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0011 Protease Inhibitor Cocktail, mini-Tablet (EDTA-Free)

MCE Protease Inhibitor Cocktail, mini-Tablet (EDTA-Free) is a blend of 5 pan-protease inhibitors for protection of protein integrity. The 25 pcs is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0012 Protease Inhibitor Cocktail, Bacteria (EDTA-Free, 100× in DMSO)

MCE Protease Inhibitor Cocktail, Bacteria (EDTA-Free, 100× in DMSO) protects proteins from degradation by endogenous proteases released during protein extraction and purification.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0013 Protease and Phosphatase Inhibitor Cocktail (EDTA-Free, 10× in ddH2O)

MCE Protease and Phosphatase Inhibitor Cocktail (EDTA-Free, 10× in ddH2O) protects protein from degradation by endogenous proteases released during protein extraction and purification.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0004 PMSF (100×)

MCE PMSF (100×) is a ready-to-use protease inhibitor solution. It can be added directly to lysis buffers at a 1:100 dilution before use.

Cocktail d'inhibiteurs de phosphatase (3)

Cat. No.: HY-K0021 Phosphatase Inhibitor Cocktail I (100× in DMSO)

Phosphatase Inhibitor Cocktail I (100× in DMSO) is a blend of 2 phosphatase inhibitors that can effectively inhibit alkaline phosphatases and serine/threonine phosphatases. It is used to maintain the phosphorylation status of proteins.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0022 Phosphatase Inhibitor Cocktail Ⅱ (100× in ddH2O)

Phosphatase Inhibitor Cocktail Ⅱ (100× in ddH2O) is a blend of 5 phosphatase inhibitors that can broadly inhibit acid phosphatases, alkaline phosphatases, and protein tyrosine phosphatases (PTPs).The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0023 Phosphatase Inhibitor Cocktail Ⅲ (100× in DMSO)

Phosphatase Inhibitor Cocktail Ⅲ (100× in DMSO) is a mixture of multiple phosphatase inhibitors that effectively inhibit serine/threonine phosphatases and alkaline phosphatases, and is used to preserve the phosphorylation status of proteins.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cocktail d'inhibiteurs de désacétylase (1)

Cat. No.: HY-K0030 Deacetylase Inhibitor Cocktail (100× in 70% DMSO)

MCE Deacetylase Inhibitor Cocktail is a synergistic combination of chemicals designed to preserve the acetylation state of proteins.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cocktail d'inhibiteurs de kinase (2)

Cat. No.: HY-K0016 Kinase Assay Buffer

MCE Kinase Assay Buffer can be used for assaying kinase protein. The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0017 Kinase Inhibitor Cocktail

MCE Kinase Inhibitor Cocktail controls the biological activity of kinases. This inhibitor is primarily used for Biochemicals applications.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Dosage des protéines (2)

Cat. No.: HY-K2001 Bradford Protein Assay Kit

MCE Bradford Protein Assay Kit is suitable for detecting the total protein content in samples such as serum, plasma, animal tissues, and cells.

Cat. No.: HY-K2002 BCA Protein Assay Kit

MCE BCA Protein Assay Kit is a colorimetric assay based on the bicinchoninic acid (BCA) reaction principle for quantitative protein determination.

Purification des protéines (71)

Support magnétique (1)

Cat. No.: HY-K0200A Magnetic Stand Plus

MCE Magnetic Stand Plus features an upgraded design that is compatible with multiple centrifuge tube formats, including 200 μL, 1.5 mL, 2 mL, 5 mL, 10 mL, and 15 mL tubes. It adopts a detachable strong magnetic block design, allowing flexible operation for samples of different volumes and improving both convenience and separation efficiency during experiments.

Billes magnétiques (20)

Cat. No.: HY-K0202 Protein A/G Magnetic Beads

MCE Protein A/G Magnetic Beads provide a fast and convenient method for Immunoprecipitation, Co-Immunoprecipitation and Chromatin Immunoprecipitation. The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0201 Anti-HA Magnetic Beads

MCE Anti-HA Magnetic Beads are used for immunoprecipitation (IP) of specific HA-tagged proteins expressed in bacterial and mammalian cells and in vitro expression systems.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0206 Anti-c-Myc Magnetic Beads

MCE Anti-c-Myc Magnetic Beads are used for immunoprecipitation (IP) of specific c-Myc-tagged proteins expressed in bacterial and mammalian cells and in vitro expression systems. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0208 Streptavidin Magnetic Beads

MCE Streptavidin Magnetic Beads provide a fast and convenient method for numerous applications, including purification of proteins and nucleic acids, protein interaction studies, immunoprecipitation, immunoassays, pull-down and cell isolation. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0204 Protein G Magnetic Beads

Protein G Magnetic Beads provide a fast and convenient method for Immunoprecipitation and Co-Immunoprecipitation and Chromatin Immunoprecipitation. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0203 Protein A Magnetic Beads

Protein A Magnetic Beads provide a fast and convenient method for Immunoprecipitation and Co-Immunoprecipitation and Chromatin Immunoprecipitation.The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0207 Anti-Flag Magnetic Beads

MCE Anti-Flag Magnetic Beads are used for immunoprecipitation (IP) of specific Flag-tagged (DYKDDDDK) proteins expressed in bacterial and mammalian cells and in vitro expression systems, and also suitable for Co-immunoprecipitation and purification of Flag-tagged protein. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0205 Protein L Magnetic Beads

Protein L Magnetic Beads provide a fast and convenient method for Immunuoprecipitaion, Co-Immunoprecipitation and Chromatin Immunoprecipitation. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0222 Anti-GST Magnetic Beads

MCE Anti-GST Magnetic Beads are used for immunoprecipitation (IP) of specific GST-tagged proteins expressed in bacterial and mammalian cells and in vitro expression systems. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0209 Anti-His Magnetic Beads

MCE Anti-His Magnetic Beads are used for immunoprecipitation (IP) of specific His-tagged proteins expressed in bacterial and mammalian cells and in vitro expression systems. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0201A Anti-HA Magnetic Beads (1 μm)

MCE Anti-HA Magnetic Beads (1 μm) are used for immunoprecipitation (IP) of specific HA-tagged proteins expressed in bacterial and mammalian cells andin vitro expression systems. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0224 Amino Magnetic Beads (200 nm, 10 mg/mL)

MCE Amino magnetic beads (200 nm，10 mg/mL) can easily and efficiently combine with a variety of biological ligand in high loads, such as proteins, peptides, oligonucleotides, drug molecules, etc. It can be used as a good basic material for subsequent processing, adsorption, chemical modification and other follow-up processing.

Cat. No.: HY-K0225 Carboxyl Magnetic Beads (200 nm, 10 mg/mL)

MCE Carboxyl Magnetic beads (200 nm, 10 mg/mL) are characterized by superparamagnetism, fast magnetic response, abundant carboxyl functional groups, monodispersity, and submicron scale particle size. Biological ligands (proteins, peptides, oligonucleotides, drug molecules, etc.) can be covalently coupled to the surface of microspheres under the action of special chemical reagents (such as EDC).

Cat. No.: HY-K0228 Oligo (dT)30 Magnetic Beads

MCE Oligo (dT)30 Magnetic Beads are designed for the rapid isolation of highly purified, intact mRNA from eukaryotic total RNA or directly from crude extracts of cells, plant and animal tissues. The 1 mL volume is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0223 Hydroxyl Magnetic Beads (200 nm, 10 mg/mL)

MCE Hydroxyl Magnetic beads (200 nm, 10 mg/mL) can rapidly isolate nucleic acids from biological samples, which is conducive to the automation and high throughput extraction of nucleic acids.

Cat. No.: HY-K0227 NHS Magnetic Beads (200nm, 10 mg/mL)

MCE NHS Magnetic Beads (200 nm, 10 mg/mL) contain N-hydroxysuccinimide (NHS) functional groups, which react with primary amines on proteins or other molecules to form stable amide linkages，can covalently immobilize proteins for the affinity purification of antibodies, antigens and other biomolecules.

Cat. No.: HY-K0226 CHO Magnetic Beads (200 nm, 10 mg/mL)

MCE CHO Magnetic Beads (200 nm, 10 mg/mL) contain CHO functional groups, which react with primary amines on proteins or other molecules to form stable amide linkages，can covalently immobilize proteins for the affinity purification of antibodies, antigens and other biomolecules.

Cat. No.: HY-K0247 ConA Magnetic Beads

MCE ConA Magnetic Beads can be used to isolate cells or purify glycoproteins from serum and cell extracts. It is also employed in experiments such as collecting and immobilizing cell nuclei, CUT & Run, and CUT & Tag. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0249 Anti-V5 Magnetic Beads

MCE Anti-V5 Magnetic Beads are well suited for the detection and purification of V5-tagged fusion proteins, as well as for applications such as immunoprecipitation (IP) and co-immunoprecipitation (Co-IP). The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K0250 Anti-MBP Magnetic Beads

Anti-MBP Magnetic Beads are suitable for the detection and purification of MBP-tagged fusion proteins, as well as for immunoprecipitation (IP) and co-immunoprecipitation (Co-IP) applications. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Colonne de chromatographie d'affinité (1)

Cat. No.: HY-K0221 Affinity Chromatography Column

MCE Affinity Chromatography (AC) Columns are designed for purification of recombinant proteins with different tags, enzymes, antibodies, antigens and nucleic acids.

Billes d'agarose (37)

Cat. No.: HY-K0210 Ni-NTA His-Tag Purification Agarose

MCE Ni-NTA His-Tag Purification Agarose, a 6% highly cross-linked agarose reagent, enables high-yield, high-purity purification of his-tagged proteins.

Cat. No.: HY-K0211 Glutathione Agarose

MCE Glutathione Agarose, a 4% highly cross-linked agarose reagent, enables high-yield, high-purity purification of GST-tagged proteins.

Cat. No.: HY-K0217 Anti-Flag Affinity Gel

MCE Anti-Flag Affinity Gel is used for immunoprecipitation (IP) or protein purification of specific Flag-tagged (DYKDDDDK) proteins expressed in bacterial and mammalian cells and in vitro expression systems.

Cat. No.: HY-K0213 Protein A Agarose

MCE Protein A Agarose, a 4% highly cross-linked agarose reagent coupled with recombinant Protein A, effectively purifies mammalian monoclonal and polyclonal antibodies, such as human IgG, IgE, IgM.

Cat. No.: HY-K0214 Protein G Agarose

MCE Protein G Agarose, a 4% highly cross-linked agarose reagent coupled with recombinant Protein G, effectively purifies mammalian monoclonal and polyclonal antibodies, such as human IgG3 and rat IgG2a.

Cat. No.: HY-K0215 Protein L Agarose

MCE Protein L Agarose, a 4% highly cross-linked agarose reagent coupled with recombinant Protein L, effectively purifies mammalian monoclonal and polyclonal antibodies which have kappa light chain.

Cat. No.: HY-K0219 High-Affinity Iodoacetyl Agarose

MCE High-Affinity Iodoacetyl Agarose, a 4% highly cross-linked agarose reagent coupled with a derivative of iodoacetic acid, is ideal for conjugating sulfhydryl-containing peptide or protein for subsequent affinity purification.

Cat. No.: HY-K0220 Ni-NTA 6FF Prepacked Column

MCE Ni-NTA 6FF Prepacked Column is ideal for high performance purification of polyhistidine-tagged proteins expressed in E.coli, yeast, insect and mammalian expression systems.

Cat. No.: HY-K0218A Streptavidin Agarose 6FF

MCE Streptavidin Agarose 6FF, a 6% highly cross-linked agarose reagent coupled with recombinant streptavidin, is an affinity chromatography medium for separation and purification of biotinylated peptides, antibodies, lectins, etc. The total binding capacity of Streptavidin Agarose 6FF is more than 200 nmol of D-Biotin/mL settled resin.

Cat. No.: HY-K0230 Protein A/G Agarose

MCE Protein A/G Agarose is an affinity chromatography medium for separation and purification of immunoglobulins.

Cat. No.: HY-K0231 Anti-c-Myc Affinity Gel

MCE Anti-c-Myc Affinity Gel can be used for the detection and purification of c-Myc fusion expressed proteins, and immunoprecipitation (IP) experiments to detect the expression of recombinant proteins in target cells.

Cat. No.: HY-K0232 Anti-HA Affinity Gel

MCE Anti-HA Affinity Gel can be employed for the detection and purification of HA fusion expressed proteins, and can also be used in immunoprecipitation (IP) experiments to detect the expression of recombinant proteins in target cells.

Cat. No.: HY-K0233 Anti-RFP Affinity Gel

MCE Anti-RFP Affinity Gel can be used for the detection and purification of native RFP, RFP mutants, and IP assays.

Cat. No.: HY-K0235 Anti-YFP Affinity Gel

MCE Anti-YFP Affinity Gel can be used for the detection and purification of proteins tagged with GFP and EGFP and IP assays.

Cat. No.: HY-K0229 Anti-GFP Affinity Gel

MCE Anti-GFP Affinity Gel can be used for the detection and purification of GFP, EGFP, their fusion-expressed proteins and IP assays.

Cat. No.: HY-K0238 Ni-IDA Agarose

MCE Ni-IDA Agarose can be used for the detection and purification of His-tag proteins.

Cat. No.: HY-K0251 Protein A Agarose (Alkali-Tolerant) 4FF

MCE Protein A Agarose (Alkali-Tolerant) 4FF can efficiently binds IgG from serum, ascites, culture supernatants, and other antibody-containing samples, enabling high-performance antibody purification.

Cat. No.: HY-K0252 MBP Agarose (Dextrin) 6FF

MCE MBP Agarose (Dextrin) 6FF is prepared by covalently coupling dextrin to an agarose matrix. It features high binding capacity, excellent specificity, and superior ligand stability. It can achieve one-step purification of MBP fusion protein.

Cat. No.: HY-K0253 Heparin Agarose 6FF

MCE Heparin Agarose 6FF is suitable for the separation and purification of heparin-binding biomolecules, including antithrombin III, coagulation factors, other plasma proteins, DNA-binding proteins, lipoproteins, protein synthesis factors, nucleic acid-related enzymes, and steroid receptors.

Cat. No.: HY-K0254 Blue Agarose 6FF

MCE Blue Agarose 6FF can be used for the purification of biological macromolecules such as albumin, interferons, nucleotide-dependent enzymes (e.g., kinases, dehydrogenases), α2-macroglobulin, and coagulation factors.

Cat. No.: HY-K0255 IMAC Agarose (NTA) 6FF

MCE IMAC Agarose (NTA) 6FF is prepared by covalently coupling tetradentate nitrilotriacetic acid (NTA) to an agarose matrix. It features high binding capacity, excellent specificity, and superior ligand stability. The resin allows flexible chelation with metal ions such as Zn2+, Ni2+, or Cu2+, and is suitable for the purification of His-tagged recombinant proteins expressed in bacterial, mammalian, insect, and baculovirus systems.

Cat. No.: HY-K0256 Chelating Agarose (IDA) 6FF

MCE Chelating Agarose (IDA) 6FF is prepared by covalently coupling tridentate iminodiacetic acid (IDA) to an agarose matrix. It features high binding capacity, excellent specificity, and superior ligand stability. The resin allows flexible chelation with metal ions such as Zn2+, Ni2+, or Cu2+, and is suitable for the purification of His-tagged recombinant proteins expressed in bacterial, mammalian, insect, and baculovirus systems.

Cat. No.: HY-K0257 CM Agarose 6FF

MCE CM Agarose 6FF is a weak cation exchanger formed by covalently coupling carboxymethyl (CM) groups to agarose microspheres. It is suitable for both laboratory research and large-scale industrial purification processes.

Cat. No.: HY-K0258 SP Agarose 6FF

MCE SP Agarose 6FF is a strong cation exchanger formed by covalently coupling sulfopropyl (SP) groups to agarose microspheres. It is suitable for both laboratory research and large-scale industrial purification processes.

Cat. No.: HY-K0259 DEAE Agarose 6FF

MCE DEAE Agarose 6FF is a weak cation exchanger formed by covalently coupling diethylaminoethyl (DEAE) groups to agarose microspheres. It is suitable for both laboratory research and large-scale industrial purification processes.

Cat. No.: HY-K0260 Q Agarose 6FF

MCE Q Agarose 6FF is a strong cation exchanger formed by covalently coupling quarternary ammonium (Q) groups to agarose. It is suitable for both laboratory research and large-scale industrial purification processes.

Cat. No.: HY-K0261 SP Agarose HP

MCE SP Agarose HP is a high-resolution strong cation exchanger formed by covalently coupling sulfopropyl (SP) groups to agarose. This medium offers high binding capacity, high specificity, and excellent ligand stability, making it suitable for both laboratory-scale and large-scale industrial purification applications.

Cat. No.: HY-K0262 DEAE Agarose HP

MCE DEAE Agarose HP is a high-resolution weak anion exchanger formed by covalently coupling diethylaminoethyl (DEAE) groups to agarose. This medium offers high binding capacity, high specificity, and excellent ligand stability, making it suitable for both laboratory-scale and large-scale industrial purification applications.

Cat. No.: HY-K0263 Q Agarose HP

MCE Q Agarose HP is a high-resolution strong anion exchanger formed by covalently coupling quaternary ammonium (Q) groups to agarose. This medium offers high binding capacity, high specificity, and excellent ligand stability, making it suitable for both laboratory-scale and large-scale industrial purification applications.

Cat. No.: HY-K0264 Butyl Agarose 4FF

MCE Butyl Agarose 4FF is a hydrophobic chromatography medium formed by covalently coupling butyl ligands to agarose. It is suitable for both laboratory use and large-scale industrial purification.

Cat. No.: HY-K0265 Butyl Agarose HP

MCE Butyl Agarose HP is a high-resolution hydrophobic chromatography medium formed by covalently coupling butyl ligands to agarose. It is suitable for both laboratory use and large-scale industrial purification.

Cat. No.: HY-K0266 Octyl Agarose 6FF

MCE Octyl Agarose 6FF is a hydrophobic chromatography medium formed by covalently coupling butyl ligands to agarose. It is suitable for both laboratory use and large-scale industrial purification.

Cat. No.: HY-K0267 Octyl Agarose HP

MCE Octyl Agarose HP is a high-resolution hydrophobic chromatography medium formed by covalently coupling octyl ligands to agarose. It is suitable for both laboratory use and large-scale industrial purification.

Cat. No.: HY-K0268 Phenyl Agarose (Low Sub) 6FF

MCE Phenyl Agarose (Low Sub) 6FF is a low-substitution hydrophobic chromatography medium formed by covalently coupling phenyl ligands to agarose. It is suitable for laboratory-scale and industrial-scale purification of biomolecules with relatively weak hydrophobicity.

Cat. No.: HY-K0269 Phenyl Agarose (High Sub) 6FF

MCE Phenyl Agarose (High Sub) 6FF is a high-substitution hydrophobic chromatography medium formed by covalently coupling phenyl ligands to agarose. It is suitable for laboratory-scale and industrial-scale purification of biomolecules with relatively weak hydrophobicity.

Cat. No.: HY-K0270 Phenyl Agarose HP

MCE Phenyl Agarose HP is a high-resolution hydrophobic chromatography medium formed by covalently coupling phenyl ligands to agarose. It is suitable for laboratory-scale and industrial-scale purification of biomolecules.

Cat. No.: HY-K0272 ConA Agarose

MCE ConA agarose is prepared by covalently coupling ConA to agarose and is widely used for the separation and purification of glycoproteins, membrane proteins, glycolipids, polysaccharides, membrane vesicles containing mannose or glucose residues, IgM, and lipoprotein hormones.

Tampon d'équilibrage (2)

Cat. No.: HY-K1023 PBS Powder (1 L of 1×)

MCE PBS Powder (1 L of 1×) consists of NaCl, KCl and Phosphate, and is widely used in immunoassay, microbiology and protein experiments. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1024 PBS Powder (2 L of 1×)

MCE PBS Powder (2 L of 1×) consists of NaCl, KCl and Phosphate, and is widely used in immunoassay, microbiology and protein experiments. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Billes d'agarose magnétiques (8)

Cat. No.: HY-K0234 Glutathione Magnetic Agarose Beads

MCE Glutathione Magnetic Agarose Beads have high protein-binding capacity and stability, making it ideal for high performance purification of GST-tagged fusion proteins expressed in E. coli, yeast, insect and mammalian expression systems.

Cat. No.: HY-K0236 Anti-Flag Magnetic Agarose Beads

MCE Anti-GFP Magnetic Agarose Beads can be used for the detection and purification of Flag (DYKDDDDK) fusion-expressed proteins and IP assays.

Cat. No.: HY-K0237 Anti-HA Magnetic Agarose Beads

MCE Anti-HA Magnetic Agarose Beads can be used for the detection and purification of HA fusion-expressed proteins and IP assays.

Cat. No.: HY-K0240 Ni-IDA Magnetic Agarose Beads

MCE Ni-IDA Magnetic Agarose Beads can be used for the detection and purification of His-tag proteins from various expression sources.

Cat. No.: HY-K0241 Ni-NTA Magnetic Agarose Beads

MCE Ni-NTA Magnetic Agarose Beads can be used for the detection and purification of His-tag proteins from various expression sources.

Cat. No.: HY-K0242 Protein A Plus Magnetic Agarose Beads

MCE Protein A Plus Magnetic Agarose Beads can be used for the detection and purification of IgG from serum, ascites fluid, cell culture supernatant and other antibody samples.

Cat. No.: HY-K0243 Protein G Plus Magnetic Agarose Beads

MCE Protein G Plus Magnetic Agarose Beads can be used for the detection and purification of IgG from serum, ascites fluid, cell culture supernatant and other antibody samples.

Cat. No.: HY-K0246 Anti-GFP Magnetic Agarose Beads

MCE Anti-GFP Magnetic Agarose Beads can be used for the detection and purification of GFP, EGFP, and their fusion-expressed proteins and IP assays.

Électrophorèse des protéines et WB (57)

Tampon d'électrophorèse (5)

Cat. No.: HY-K1018 Tris-MES-SDS Powder (1 L of 1×)

MCE Tris-MES-SDS Powder (1 L of 1×) consists of Tris, MES, EDTA and SDS, and is mainly used for separation of small- to medium-sized proteins. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1019 Tris-MOPS-SDS Powder (1 L of 1×)

MCE Tris-MOPS-SDS Powder (1 L of 1×) consists of Tris, MOPS, EDTA and SDS, and is mainly used for separation of medium- to large-sized proteins. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1020 Tris-Glycine-SDS Powder (1 L of 1×)

MCE Tris-Glycine-SDS Powder (1 L of 1×) consists of Tris, Glycine and SDS, and is widely used as an electrophoresis buffer for SDS-PAGE and Western Blot. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1030 SDS dust-free Powder

MCE SDS dust-free Powder can be directly prepared into 10% SDS solution, and is widely used for protein denaturation.

Cat. No.: HY-K1034 Tris-HEPES-SDS Powder (500 mL of 1×)

MCE Tris-HEPES-SDS Powder (500 mL of 1×) consists of Tris, HEPES, EDTA and SDS, and is widely used in protein electrophoresis. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Marqueur de protéine (3)

Cat. No.: HY-K1011 3-Color Prestained Protein Marker (10-190 kDa)

MCE 3-Color Prestained Protein Marker (10-190 kDa) is a three-color protein standard with 10 prestained proteins ranging from 10 kDa to 190 kDa. The 250 μL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1101 3-Color Prestained Protein Marker (2.7-40 kDa)

MCE 3-Color Prestained Protein Marker (2.7-40 kDa) is a three-color protein standard with 9 prestained proteins ranging from 2.7 kDa to 40 kDa. The 250 μL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1011A 3-Color Prestained Protein Marker (10-180 kDa)

MCE 3-Color Prestained Protein Marker (10-180 kDa) consists of 10 prestained recombinant proteins with an apparent molecular weight range of 10–180 kDa. This marker enables real-time monitoring of protein migration during SDS-PAGE and facilitates evaluation of protein transfer efficiency. The 250 μL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Tampon de transfert (3)

Cat. No.: HY-K1021 Tris-Glycine Powder (1 L of 1×)

MCE Tris-Glycine Powder (1 L of 1×) consists of Tris and Glycine, and is widely used as an electrophoresis buffer for Native-PAGE. The 10 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1028 Transfer Buffer (Semi Dry) Powder (1 L of 1×)

MCE Transfer Buffer (Semi Dry) Powder (1 L of 1×) consists of Tris, Glycine and SDS, and is suitable for Western Blot semi-dry electrophoresis. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1200 Rapid Protein Transfer Buffer, No Ice Bath Required (10×)

MCE Rapid Protein Transfer Buffer, No Ice Bath Required (10×) is formulated with an optimized rapid protein transfer system for both wet transfer and semi-dry transfer applications. It enables the rapid and efficient transfer of proteins from PAGE gels onto PVDF or nitrocellulose (NC) membranes for Western blot analysis.

Tampon de blocage (1)

Cat. No.: HY-K1027 Rapid Blocking Buffer (TBS-T) Powder (100 mL of 1×)

MCE Rapid Blocking Buffer (TBS-T) Powder (100 mL of 1×) mainly consists of fish gelatin protein, and is widely used for the antibody blocking step in Western Blot or ELISA within 15 minutes.

Tampon de liaison/lavage (2)

Cat. No.: HY-K1022 PBS-T Powder (1 L of 1×)

MCE PBS-T Powder (1 L of 1×) consists of NaCl, KCl, Phosphate and Tween 20, and is widely used in ELISA and Western Blot, and can also be used for antibody dilution and preparation of blocking solution. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1025 TBS-T Powder (1 L of 1×)

MCE TBS-T Powder (1 L of 1×) consists of NaCl, KCl, Tris and Tween 20, and is widely used as washing buffer in immunocytochemistry, FISH or ELISA, and can also be used for antibody dilution and preparation of blocking solution. The 20 pouches are defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Détection par chimiluminescence (3)

Cat. No.: HY-K1005 Ultra High Sensitivity ECL Kit

MCE Ultra High Sensitivity ECL Kit is an ultra-sensitive, luminol-based enhanced chemiluminescent substrate for detecting horseradish peroxidase (HRP) labeled antibodies on western blots. The 100 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K2005 High Sensitivity ECL Kit

High Sensitivity ECL Kit enables low picogram detection of antigen by oxidizing luminol in the presence of HRP and peroxide. This reaction produces a prolonged chemiluminescence which can be visualized on X-ray film or digital imaging systems. The 100 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K2006 Sensitive ECL Kit

Sensitive ECL Kit enables low picogram detection of antigen by oxidizing luminol in the presence of HRP and peroxide. This reaction produces a prolonged chemiluminescence which can be visualized on X-ray film or digital imaging systems. The 100 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Tampon de chargement (2)

Cat. No.: HY-K1100 SDS-PAGE Sample Loading Buffer (4×)

SDS-PAGE Sample Loading Buffer (4×) is appropriate for loading protein samples on SDS-PAGE. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1108 SDS-PAGE Protein Loading Buffer (non-Reducing, 5×)

MCE SDS-PAGE Protein Loading Buffer (non-Reducing, 5×) is appropriate for loading protein samples on SDS-PAGE. The 1 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Protein Staining Solution (2)

Cat. No.: HY-K1103 Coomassie Blue Fast Staining Solution (No Heating, 10×)

MCE Coomassie Blue Fast Staining Solution (No Heating, 10×) uses Coomassie Brilliant Blue G250 as the dye. It can be used for rapid, sensitive staining of protein gels in SDS-PAGE or Native-PAGE without contamination, or for detecting residual proteins on PAGE gels after Western Blot transfer. The 25 mL is defined as the base specification. All larger sizes correspond to incremental volumes of this base.

Cat. No.: HY-K1109 Ponceau Staining Solution (Ready-to-use, 1×)

MCE Ponceau S staining solution (ready-to-use, 1×) is a ready-to-use membrane staining solution that can be used for protein detection on PVDF membranes, nitrocellulose membranes, and cellulose acetate membranes.

Gel Preparation Kit (1)

Cat. No.: HY-K1105A One Step Colored Rapid Gel Preparation Kit (12.5%)

MCE One Step Colored Rapid Gel Preparation Kit (12.5%) uses pre-mixed formulations of the upper gel and lower gel. Simply mix the reagents in pairs, add modified coagulation agent, and the gel will form quickly and easily.

Antibody Dilution Buffer (3)

Cat. No.: HY-K2007 Antibody Dilution Buffer (for Western Blot)

MCE Antibody Dilution Buffer (for Western Blot) is specifically designed for the dilution and preparation of primary and secondary antibodies in Western blot applications.

Cat. No.: HY-K2008 Antibody Dilution Buffer (for Immunohistochemistry, IHC)

MCE Antibody Dilution Buffer (for Immunohistochemistry, IHC) is specifically designed for the dilution and preparation of primary and secondary antibodies in IHC.

Cat. No.: HY-K2009 Antibody Dilution Buffer (for Immunostaining)

MCE Antibody Dilution Buffer (for Immunostaining) is specifically designed for the dilution and preparation of primary and secondary antibodies in Immunostaining applications.

Protein Gel (32)

Cat. No.: HY-K1111 GelHP Protein Gel (Tris-Gly, 10%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1112 GelHP Protein Gel (Tris-Gly, 10%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1113 GelHP Protein Gel (Tris-Gly, 12%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1114 GelHP Protein Gel (Tris-Gly, 12%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1115 GelHP Protein Gel (Tris-Gly, 15%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1116 GelHP Protein Gel (Tris-Gly, 15%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1117 GelHP Protein Gel (Tris-Gly, 4-15%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1118 GelHP Protein Gel (Tris-Gly, 4-15%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1119 GelHP Protein Gel (Tris-Gly, 4-20%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1120 GelHP Protein Gel (Tris-Gly, 4-20%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1121 GelHP Protein Gel (Tris-Gly, 8-16%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1122 GelHP Protein Gel (Tris-Gly, 8-16%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1123 GelHP Protein Gel (Tris-Gly, 8-20%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1124 GelHP Protein Gel (Tris-Gly, 8-20%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1140 GelHP Protein Gel (Tris-Gly, 8%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1141 GelHP Protein Gel (Tris-Gly, 8%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1125 GelHP Protein Gel (Bis-Tris, 10%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1126 GelHP Protein Gel (Bis-Tris, 10%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1127 GelHP Protein Gel (Bis-Tris, 12%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1128 GelHP Protein Gel (Bis-Tris, 12%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1129 GelHP Protein Gel (Bis-Tris, 15%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1130 GelHP Protein Gel (Bis-Tris, 15%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1131 GelHP Protein Gel (Bis-Tris, 4-15%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1132 GelHP Protein Gel (Bis-Tris, 4-15%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1133 GelHP Protein Gel (Bis-Tris, 4-20%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1134 GelHP Protein Gel (Bis-Tris, 4-20%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1135 GelHP Protein Gel (Bis-Tris, 8-16%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1136 GelHP Protein Gel (Bis-Tris, 8-16%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1137 GelHP Protein Gel (Bis-Tris, 8-20%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1138 GelHP Protein Gel (Bis-Tris, 8-20%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1142 GelHP Protein Gel (Bis-Tris, 8%, 10 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Cat. No.: HY-K1143 GelHP Protein Gel (Bis-Tris, 8%, 15 well)

MCE GelHP Protein Gel offers a safe, convenient, and high‑performance solution for protein separation, suitable for both PAGE and Western blot analysis.

Multiple Fluorescent Staining (10)

Cat. No.: HY-KD1001 Vari Fluor 3-colour Multiple Fluorescent Staining Kit (For mouse samples)

The MCE three-color immunohistochemical kit marks the dual indicators. The kit contains rabbit secondary antibodies and can be used in combination with rabbit primary antibodies

Cat. No.: HY-KD1004 Vari Fluor 4-colour Multiple Fluorescent Staining Kit (For all samples)

The MCE four-color histochemical kit can label three indicators. The kit contains a universal secondary antibody for rabbits and mice and can be used in combination with primary antibodies for rabbits or mice.

Cat. No.: HY-KD1005 Vari Fluor 5-colour Multiple Fluorescent Staining Kit ((For mouse samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction.

Cat. No.: HY-KD1006 Vari Fluor 5-colour Multiple Fluorescent Staining Kit (For all samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction (MCE offers six VF series dyes: VF 480, VF 520, VF 570, VF 620, VF 690, and VF 780, allowing customers to flexibly select the appropriate formula based on their specific needs).

Cat. No.: HY-KD1007 Vari Fluor 6-colour Multiple Fluorescent Staining Kit ((For mouse samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction (MCE offers six VF series dyes: VF 480, VF 520, VF 570, VF 620, VF 690, and VF 780, allowing customers to flexibly select the appropriate formula based on their specific needs).

Cat. No.: HY-KD1008 Vari Fluor 6-colour Multiple Fluorescent Staining Kit (For all samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction (MCE offers six VF series dyes: VF 480, VF 520, VF 570, VF 620, VF 690, and VF 780, allowing customers to flexibly select the appropriate formula based on their specific needs).

Cat. No.: HY-KD1009 Vari Fluor 7-colour Multiple Fluorescent Staining Kit (For mouse samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction (MCE offers six VF series dyes: VF 480, VF 520, VF 570, VF 620, VF 690, and VF 780, allowing customers to flexibly select the appropriate formula based on their specific needs).

Cat. No.: HY-KD1010 Vari Fluor 7-colour Multiple Fluorescent Staining Kit (For all samples)

MCE offers a wide range of multiplex fluorescence kits for simultaneous detection of up to six targets to maximise customer satisfaction (MCE offers six VF series dyes: VF 480, VF 520, VF 570, VF 620, VF 690, and VF 780, allowing customers to flexibly select the appropriate formula based on their specific needs).

Cat. No.: HY-KD1004A Vari Fluor 4-colour Multiple Fluorescent Staining Kit-1 (For all samples)
Multiplex immunohistochemistry is also known as Tyramide Signal Amplification (TSA, Tyramide dignal amplification). It has been used for more than 20 years as an enzymatic assay for high-density in situ labelling of target proteins or nucleic acids by horseradish peroxidase (HRP). The method is based on multiple cis-immunostaining with tyramide signal amplification, which allows the detection of multiple target sites in cell or tissue samples in situ, and elucidation of their interaction mechanism through the study of the combination and positional relationship of these target sites.
Cat. No.: HY-KM0010 Centrifugal Protein Desalting Column (5 kDa)

MCE Centrifugal Protein Desalting Column (5 kDa) is a prepacked desalting device containing resin particles with a particle size of 57–80 μm. It efficiently separates small molecules with molecular weights ≤ 5 kDa (such as salts and buffer components) from macromolecules ≥ 5 kDa (such as proteins and peptides), making it suitable for protein desalting and buffer exchange applications.

Immunoassay (18)

Cat. No.: HY-K2101 HOLO Human Interleukin-2 (IL-2) Detection Kit

MCE HOLO Human Interleukin-2 (IL-2) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-2 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2102 HOLO Human Interleukin-5 (IL-5) Detection Kit

MCE HOLO Human Interleukin-5 (IL-5) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-5 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2103 HOLO Human Interleukin-6 (IL-6) Detection Kit

MCE HOLO Human Interleukin-6 (IL-6) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-6 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2104 HOLO Human Interleukin-8 (IL-8) Detection Kit

MCE HOLO Human Interleukin-8 (IL-8) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-8 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2105 HOLO Human Interleukin-10 (IL-10) Detection Kit

MCE HOLO Human Interleukin-10 (IL-10) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-10 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2106 HOLO Human Interleukin-12p70 (IL-12p70) Detection Kit

MCE HOLO Human Interleukin-12p70 (IL-12p70) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-12p70 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2107 HOLO Human Interleukin-17A (IL-17A) Detection Kit

MCE HOLO Human Interleukin-17A (IL-17A) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-17A concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2108 HOLO Human Interleukin-17F (IL-17F) Detection Kit

MCE HOLO Human Interleukin-17F (IL-17F) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-17F concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2109 HOLO Human Interleukin-22 (IL-22) Detection Kit

MCE HOLO Human Interleukin-22 (IL-22) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-22 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2110 HOLO Human Interferon-γ (IFN-γ) Detection Kit

MCE HOLO Human Interferon-γ (IFN-γ) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IFN-γ concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2112 HOLO Human Tumor Necrosis Factor-α (TNF-α) Detection Kit

MCE HOLO Human Tumor Necrosis Factor-α (TNF-α) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human TNF-α concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2111 HOLO Mouse Interferon-γ (IFN-γ) Detection Kit

MCE HOLO Mouse Interferon-γ (IFN-γ) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of mouse IFN-γ concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2113 HOLO Human Tumor Necrosis Factor-β (TNF-β) Detection Kit

MCE HOLO Human Tumor Necrosis Factor-β (TNF-β) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human TNF-β concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2115 HOLO Human Interleukin-2 Receptor (IL-2R) Detection Kit

MCE HOLO Human Interleukin-2 Receptor (IL-2R) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-2R concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2114 HOLO Mouse Tumor Necrosis Factor-α (TNF-α) Detection Kit

MCE HOLO Mouse Tumor Necrosis Factor-α (TNF-α) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of mouse TNF-α concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2116 HOLO Human Interleukin-1β (IL-1β) Detection Kit

MCE HOLO Human Interleukin-1β (IL-1β) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of human IL-1β concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2117 HOLO Mouse Interleukin-6 (IL-6) Detection Kit

MCE HOLO Mouse Interleukin-6 (IL-6) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of Mouse IL-6 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Cat. No.: HY-K2118 HOLO Mouse Interleukin-2 (IL-2) Detection Kit

MCE HOLO Mouse Interleukin-2 (IL-2) Detection Kit is a homogeneous luminescence-based assay used for the quantitative detection of Mouse IL-2 concentrations in biological samples such as buffer solutions, cell culture supernatants, or serum.

Immunoprecipitation Kit (2)

Cat. No.: HY-K0202K IP/Co-IP Kit (Protein A/G Magnetic Beads)

MCE IP/Co-IP Kit (Protein A/G Magnetic Beads) can be used for protein purification, IP, Co-IP of target proteins or their protein complexes.

Cat. No.: HY-K0003 IP/Co-IP Elution Buffer

MCE IP Elution Buffer is a ready-to-use elution system specifically designed for IP/Co-IP experiments. It consists of an elution buffer and a matched neutralization buffer, enabling efficient and controlled elution of target proteins and ensuring compatibility with downstream analytical applications.

Labeling Kit (16)

Cat. No.: HY-K0702 Antibody Labeling Kit-VF 488

MCE Antibody Labeling Kit-VF 488 can efficiently and covalently attach the VF 488 dye to antibodies.

Cat. No.: HY-KD1101 Green Fluorescent Rapid Labeling Kit (FITC）
Green Fluorescent Rapid Labelling Kit (FITC) enables green fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 488/515 nm. Based on NHS-ester chemistry, the NHS-ester-activated fluorescent dye reacts with primary amines in pH 7-9 solutions to form stable amide bonds, thereby achieving conjugation with antibodies/proteins. Typically, one IgG molecule can bind 2-8 molecules of FITC. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1103 Red Fluorescent Rapid Labeling Kit (CY3）
Red Fluorescent Rapid Labelling Kit (CY3) enables red fluorescent labelling of proteins. Maximum excitation/ Emission Wavelength: 550/570 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation with the antibody/protein. Typically, one IgG molecule can bind 2–8 molecules of CY3. The entire experiment can be completed within 2 hours.
Cat. No.: HY-KD1104 Red Fluorescent Rapid Labeling Kit (AF555）
Red Fluorescent Rapid Labelling Kit (AF555) enables red fluorescent labelling of proteins. Maximum excitation/ Emission Wavelength: 555/565 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in pH 7-9 solutions to form stable amide bonds with the target antibody/protein, achieving conjugation. Typically, one IgG molecule can bind 2-8 molecules of AF555. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1106 Deep Red Fluorescent Rapid Labeling Kit (AF647）
Red Fluorescent Rapid Labelling Kit (AF647) enables red fluorescent labelling of proteins. Maximum excitation/ Emission Wavelength: 647/665 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation. Typically, one IgG molecule can bind 2-8 molecules of AF647. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1107 Deep Red Fluorescent Rapid Labeling Kit (CY5）
Deep Red Fluorescent Rapid Labelling Kit (CY5) enables red fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 649/667 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation. Typically, one IgG molecule can bind 2–8 molecules of CY5. The entire experiment can be completed within 2 hours.
Cat. No.: HY-KD1109 NIR Red Fluorescent Rapid Labeling Kit (CY7）
Near-infrared Fluorescent Rapid Labelling Kit (CY7) enables red fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 750/773 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation. Typically, one IgG molecule can bind 2–8 molecules of CY7. The entire experiment can be completed within 2 hours.
Cat. No.: HY-KD1110 NIR Red Fluorescent Rapid Labeling Kit (CY7.5）
The Near-Infrared Fluorescence Rapid Labelling Kit (CY7.5) enables red fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 788/814 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation. Typically, one IgG molecule can bind 2-8 molecules of CY7.5. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1115 DOTA Rapid Labeling Kit
The DOTA rapid labelling kit enables DOTA labelling of proteins. Based on NHS ester chemistry, NHS ester-activated fluorescent dyes react with primary amines on the antibody/protein to form stable amide bonds at pH 7–9, thereby achieving conjugation with the antibody/protein. Typically, a single IgG molecule can bind 2–8 DOTA molecules. The entire procedure can be completed within 2 hours.
Cat. No.: HY-KD1114 Nota Rapid Labeling Kit
The NOTA Rapid Labelling Kit enables NOTA labelling of proteins. Based on NHS ester chemistry, NHS ester-activated fluorescent dyes react with primary amines on the antibody/protein to be labelled in a pH 7-9 solution, forming stable amide bonds to achieve conjugation with the antibody/protein. Typically, a single IgG molecule can bind 2–8 NOTA molecules. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1113 Biotinylated Rapid Labeling Kit
The Biotinylation Rapid Labelling Kit enables biotinylation of proteins. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled within a pH 7-9 solution, forming stable amide bonds to achieve conjugation with the antibody/protein. Typically, a single IgG molecule can bind 2-8 molecules of biotin. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1112 Blue Fluorescent Rapid Labeling Kit (AF350）
TheBlue Fluorescence Rapid Labelling Kit (AF350) enables red fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 346/442 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in the antibody/protein to be labelled at pH 7-9, forming stable amide bonds to achieve conjugation. Typically, one IgG molecule can bind 2-8 molecules of AF350. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1111 NIR Red Fluorescent Rapid Labeling Kit (AF750）
Near-infrared Fluorescent Rapid Labelling Kit (AF750) enables red fluorescent labelling of proteins. Maximum excitation/ Emission Wavelength: 750/775 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in pH 7-9 solutions to form stable amide bonds, thereby achieving conjugation with antibodies/proteins. Typically, one IgG molecule can bind 2-8 molecules of AF750. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1102 Green Fluorescent Rapid Labeling Kit (AF488）
Green Fluorescent Rapid Labelling Kit (AF488) enables green fluorescent labelling of proteins. Maximum excitation/ emission wavelengths: 480/525 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in pH 7-9 solutions to form stable amide bonds, thereby achieving conjugation with antibodies/proteins. Typically, one IgG molecule can bind 2-8 molecules of AF488. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1105 Red Fluorescent Rapid Labeling Kit (AF594）
Red Fluorescent Rapid Labelling Kit (AF594) enables red fluorescent labelling of proteins. Maximum excitation/ Emission Wavelength: 594/617 nm. Based on NHS ester chemistry, the NHS ester-activated fluorescent dye reacts with primary amines in pH 7-9 solutions to form stable amide bonds, thereby achieving conjugation with antibodies/proteins. Typically, one IgG molecule can bind 2-8 molecules of AF594. The entire procedure can be completed within two hours.
Cat. No.: HY-KD1116 R-PE Rapid Labeling Kit
R-PE (R for phycoerythrin) is the brightest and most commonly used orange-red fluorescent protein probe in flow cytometry and immunofluorescence; it is particularly suitable for detecting low-expressing antigens. Excitation wavelengths: 488 nm (most common) and 561 nm; emission wavelength: 575 nm; flow cytometry channels: PE / 585/40 channels.