2. Vitamin D Related/Nuclear Receptor
  3. Androgen Receptor
  4. Bifluranol

Bifluranol (BX341) is an anti-androgen.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Bifluranol

Bifluranol 構造式

CAS 番号 : 34633-34-6

容量 価格（税別） 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 506 在庫あり
Solution
10 mM * 1 mL in DMSO USD 506 在庫あり
Solid
5 mg $460 在庫あり
10 mg $750 在庫あり
25 mg $1500 在庫あり
50 mg $2400 在庫あり
100 mg   お問い合わせ  
200 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

Bifluranol 関連抗体

Top Publications Citing Use of Products

  • 生物活性

  • プロトコル

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Bifluranol (BX341) is an anti-androgen.

IC50 & Target

Androgen Receptor[1]
体内実験

The absorption, distribution and excretion of Bifluranol have been studied in mouse, rat, ferret and dog; Bifluranol is readily absorbed following oral administration, but blood concentrations of Bifluranol are low due to hepatic uptake and biliary excretion. After intravenous administration of [3H]Bifluranol to rats (200 μg/kg) and ferrets (60 μg/kg) the blood concentrations of 3H decreases rapidly for the first 2 to 3 h, with the decrease being more rapid in females ( 18 min for rat, 30 min for ferret) than males (1.0 h for rat, 1.4 h for ferret). This is followed by a much slower decline (40 h for rat, 20 h for ferret) to concentrations at 96 h of less than 15 ng Bifluranol equivalents mL-1 (rat) or 1 ng Bifluranol equivalents mL-1 (ferret)[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
分子量

292.32

分子式

C17H18F2O2
CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

C[C@H](C1=CC(F)=C(O)C=C1)[C@H](C2=CC(F)=C(O)C=C2)CC
輸送条件

Room temperature in continental US; may vary elsewhere.
保管条件
Powder -20°C 3 years
  4°C 2 years
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

DMSO : 100 mg/mL (342.09 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 3.4209 mL 17.1045 mL 34.2091 mL
5 mM 0.6842 mL 3.4209 mL 6.8418 mL
10 mM 0.3421 mL 1.7105 mL 3.4209 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始）

C1

×
体積 （開始）

V1

=
濃度 （終了）

C2

×
体積 （終了）

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (8.55 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (8.55 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
参考文献
動物実験
[1]

Mice, Rats, Dogs and Ferrets[1]
Swiss albino mice (24-28 g, males age 4 weeks, females age 6 weeks; pregnant mice mated at 6 weeks, used at day 18 of pregnancy) and Wistar albino rats (200 g males age 6 weeks, females age 8 weeks; 350 g males age 10 weeks) are fed Dixon's mouse and rat diet and have free access to water. Albino ferrets (0.7-2.6 kg, age 9-15 months) are fed raw meat, bread and milk. Male beagles (10.8-12.3 kg, age 10-14 years) are fed Spratt's complete dog diet. [3H]Bifluranol administration is by intragastric intubation, in propylene glycol (mouse 0.1 ml, rat 0.1-0.2 mL, ferret 0.1-0.4 mL and dog 1 mL), except for the dog 96 h excretion study when the drug is absorbed onto starch and given in a gelatin capsule. Bifluranol is given intravenously in propylene glycol-0.9% NaCl (saline) (1 : 1 v/v) (0.1-0.2 mL), via a tail vein in mice and rats and the jugular vein in ferrets (under ether anaesthesia). [3H]Bifluranol (2 mg/kg, 1.1 mCi) is administered orally or intravenously to male, female and pregnant mice. After various time intervals they are killed under ether anaesthesia by immersion in solid CO2-hexane (-70°C). The tail, limbs and ears are removed. The animals shaved, embedded and frozen in 5 % aq. acacia wax. The animal blocks are cut using a Slee whole-body freezing microtome to obtain lateral sections (30 pm) which are exposed to X-ray film at 4°C and the auto-radiograms examined after 1,3 or 6 months. [3H]Bifluranol is adrninistered orally or intravenously to rats (200 μg/kg, 0.86-1.0 mCi) , ferrets (60 μg/kg, 5.0-10.6 mCi) and orally only to dogs (50 μg/kg, 70-76 mCi) . Blood samples (10-100 μL) are taken for radioactivity determination at time intervals up to 96 h (rat and ferret) or 6 h (dog).

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 3.4209 mL 17.1045 mL 34.2091 mL 85.5227 mL
5 mM 0.6842 mL 3.4209 mL 6.8418 mL 17.1045 mL
10 mM 0.3421 mL 1.7105 mL 3.4209 mL 8.5523 mL
15 mM 0.2281 mL 1.1403 mL 2.2806 mL 5.7015 mL
20 mM 0.1710 mL 0.8552 mL 1.7105 mL 4.2761 mL
25 mM 0.1368 mL 0.6842 mL 1.3684 mL 3.4209 mL
30 mM 0.1140 mL 0.5702 mL 1.1403 mL 2.8508 mL
40 mM 0.0855 mL 0.4276 mL 0.8552 mL 2.1381 mL
50 mM 0.0684 mL 0.3421 mL 0.6842 mL 1.7105 mL
60 mM 0.0570 mL 0.2851 mL 0.5702 mL 1.4254 mL
80 mM 0.0428 mL 0.2138 mL 0.4276 mL 1.0690 mL
100 mM 0.0342 mL 0.1710 mL 0.3421 mL 0.8552 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Bifluranol Related Classifications

  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始） × 体積 （開始） = 濃度 （終了） × 体積 （終了）
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Bifluranol34633-34-6BX341BX 341BX-341Androgen ReceptorInhibitorinhibitorinhibit

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

  

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

      

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Bifluranol
製品番号:
HY-U00229
数量:
MCE 日本正規代理店:

カスタマーレビュー

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

製品名

  

Lot #

お名前 *

 

メールアドレス *

電話番号 *

 

部門 *

組纖名 *

 

国或いは地域 *

備考

Request for HNMR Report

We have received your request and will respond to you as soon as possible.