Eriochrome black T, Indicator

Name: Eriochrome black T, Indicator
Brand: MedChemExpress
SKU: HY-W110910
Rating: 4.5 (0 reviews)

製品番号: HY-W110910: Data Sheet SDS COA 取扱説明書
FAQs
Technical Support

Eriochrome black T, Indicator is a complexing agent for metal ions (e.g., Ca²⁺, Mg²⁺) and is used as an indicator in complexometric titrations. Eriochrome black T, Indicator forms colored complexes with metal ions through covalent coordination bonds, and indicates the endpoint of the titration by color change. Eriochrome black T, Indicator can be used as an anionic azo dye in photocatalytic degradation studies to evaluate the performance of photocatalysts. The reaction solution of Eriochrome black T, Indicator combined with Mg²⁺ is initially purple. During loop-mediated isothermal amplification (LAMP), the color changes from purple to sky blue due to the consumption of Mg²⁺ by the formation of magnesium pyrophosphate, indicating a positive reaction. The optimal concentration of Eriochrome black T, Indicator in LAMP is 60 μM, and the detection limit for Mycobacterium tuberculosis is 1 pg DNA/reaction.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Eriochrome black T, Indicator 構造式

CAS 番号 : 1787-61-7

容量	価格（税別）	在庫状況	数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO ready for reconstitution	USD 27	在庫あり	Estimated Time of Arrival: December 31
Solution
10 mM * 1 mL in DMSO	USD 27	在庫あり	Estimated Time of Arrival: December 31
Solid
5 g	$25	在庫あり	Estimated Time of Arrival: December 31
10 g	$34	在庫あり	Estimated Time of Arrival: December 31
25 g	$55	在庫あり	Estimated Time of Arrival: December 31
50 g		お問い合わせ

or バルクお問い合わせ

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Eriochrome black T, Indicator:

Eriochrome black T お問い合わせ

おすすめ

•関連小分子:

•関連タンパク質:

生物活性
純度とドキュメンテーション
参考文献
カスタマーレビュー

製品説明

体外実験

Eriochrome black T, Indicator can be used to detect Mycobacterium tuberculosis by loop-mediated isothermal amplification (LAMP) reaction. It indirectly indicates the presence of bacterial DNA through the consumption of magnesium ions in the LAMP reaction. Eriochrome black T, Indicator can bind to Mg²⁺ to form a purple complex. In the initial stage of the LAMP reaction, the concentration of Mg²⁺ in the solution is sufficient; and Eriochrome black T, Indicator appears purple. When the byproduct magnesium pyrophosphate (Mg₂P₂O₇) precipitates, Eriochrome black T, Indicator turns sky blue^[2].

1.?DNA extraction
(1) Biological specimen processing:
Sputum or bronchoalveolar lavage fluid was treated by the Petroff method and DNA was extracted by boiling.
The biological specimen was washed twice with TE buffer, the precipitate was boiled for 5-10 minutes, and the supernatant was taken as template DNA after centrifugation.
(2) Preparation of purified DNA:
Genomic DNA was extracted from Mycobacterium tuberculosis H37Rv strain for reaction optimization and detection limit determination: the bacterial liquid was suspended in TE buffer, inactivated at 80°C for 1 hour, lysed with lysozyme and proteinase K at 37°C, and purified DNA was obtained by chloroform-isoamyl alcohol extraction and isopropanol precipitation.

2. LAMP reaction system (taking 25 μL system as an example)
Reaction components:
Inner primers (FIP, BIP) 1.6 μM each, outer primers (F3, B3) 0.2 μM each, loop primers (FLP, BLP) 0.8 μM each;
0.8 M betaine, 1X ThermoPol buffer, 8 U Bst DNA polymerase, 1 ng template DNA;
3.5 mM MgSO₄, 1.4 mM dNTPs, 60 μM EBT indicator.
Incubation conditions: 64°C constant temperature incubation for 30 minutes, no denaturation or annealing steps required.

3. Result observation
Positive judgment: The color of the reaction solution changes from purple to sky blue, indicating the presence of target DNA.
Negative control: The reaction solution without template DNA should remain purple.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

461.38

分子式

C₂₀H₁₂N₃NaO₇S

CAS 番号

1787-61-7

Appearance

Solid

Color

Brown to black

SMILES

O=S(C1=C2C=C([N+]([O-])=O)C=CC2=C(/N=N/C3=CC=C4C=CC=CC4=C3O)C(O)=C1)(O[Na])=O

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, stored under nitrogen, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)

溶剤 & 溶解度

体外:

DMSO : 50 mg/mL (108.37 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions

Concentration Solvent Mass	1 mg	5 mg	10 mg

1 mM	2.1674 mL	10.8371 mL	21.6741 mL
5 mM	0.4335 mL	2.1674 mL	4.3348 mL
10 mM	0.2167 mL	1.0837 mL	2.1674 mL

View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Molarity Calculator
Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Concentration _(start) × Volume _(start) = Concentration _(final) × Volume _(final)

一般には略語で表示されます：C₁V₁ = C₂V₂

濃度 _（開始）

体積 _（開始）

濃度 _（終了）

体積 _（終了）

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

Protocol 1

Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2 mg/mL (4.33 mM); Clear solution

This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.

In Vivo Dissolution Calculator

Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.

Please enter your animal formula composition:

DMSO +

Tween-80 +

Saline

Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.

The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).

Calculation results:

Working solution concentration: mg/mL

Method for preparing stock solution: mg drug dissolved in μL DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).

Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.

If the continuous dosing period exceeds half a month, please choose this protocol carefully.

Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.

純度とドキュメンテーション

Select Batch:

データシート (279 KB) SDS (597 KB)

COA (254 KB)

取扱説明書 (2659 KB)

参考文献

[1]. Waghchaure R H, et al. Photocatalytic degradation of methylene blue, rhodamine B, methyl orange and Eriochrome black T dyes by modified ZnO nanocatalysts: A concise review[J]. Inorganic Chemistry Communications, 2022, 143: 109764.

[2]. Neshani A, et al. A Comparative Study on Visual Detection of Mycobacterium tuberculosis by Closed Tube Loop-Mediated Isothermal Amplification: Shedding Light on the Use of Eriochrome Black T. Diagnostics (Basel). 2023 Jan 2;13(1):155. [Content Brief]

Complete Stock Solution Preparation Table

Optional Solvent	Concentration Solvent Mass	1 mg	5 mg	10 mg	25 mg

DMSO	1 mM	2.1674 mL	10.8371 mL	21.6741 mL	54.1853 mL
	5 mM	0.4335 mL	2.1674 mL	4.3348 mL	10.8371 mL
	10 mM	0.2167 mL	1.0837 mL	2.1674 mL	5.4185 mL
	15 mM	0.1445 mL	0.7225 mL	1.4449 mL	3.6124 mL
	20 mM	0.1084 mL	0.5419 mL	1.0837 mL	2.7093 mL
	25 mM	0.0867 mL	0.4335 mL	0.8670 mL	2.1674 mL
	30 mM	0.0722 mL	0.3612 mL	0.7225 mL	1.8062 mL
	40 mM	0.0542 mL	0.2709 mL	0.5419 mL	1.3546 mL
	50 mM	0.0433 mL	0.2167 mL	0.4335 mL	1.0837 mL
	60 mM	0.0361 mL	0.1806 mL	0.3612 mL	0.9031 mL
	80 mM	0.0271 mL	0.1355 mL	0.2709 mL	0.6773 mL
	100 mM	0.0217 mL	0.1084 mL	0.2167 mL	0.5419 mL