1. Others
  2. Fluorescent Dye
  3. FITC-Dextran (MW 40000)

FITC-Dextran (MW 40000) is a fluorescent probe for fluorescein isothiocyanate (FITC) dextran (Ex=495 nm; Em=525 nm). FITC-Dextran (MW 40000) can be used as a marker to reveal heat shock-induced cell damage and to study the early and late stages of apoptosis. FITC-Dextran (MW 40000) can also be used for cell permeability studies, such as blood-brain barrier permeability and determination of the extent of blood-brain barrier disruption.

Para uso exclusivo en investigación. No vendemos a pacientes.

No. CAS : 60842-46-8

Tamaño Precio Stock Cantidad
Muestra gratis (0.1 - 0.2 mg)   Solicite ahora  
5 mg En stock
10 mg En stock
25 mg En stock
50 mg En stock
100 mg En stock
200 mg   Obtener un presupuesto  
500 mg   Obtener un presupuesto  

* Seleccione Cantidad antes de agregar artículos.

This product is a controlled substance and not for sale in your territory.

Revisión del cliente

Based on 12 publication(s) in Google Scholar

Top Publications Citing Use of Products

    FITC-Dextran (MW 40000) purchased from MedChemExpress. Usage Cited in: Adv Sci (Weinh). 2025 Aug;12(30):e00461.  [Abstract]

    The plasma FD4 level in Acss2CKO and Acss2fl/fl mice (n = 7). For intestinal permeability assessment, mice were fasted for 8 h, followed by oral administration of FITC‑Dextran (MW 40000, 0.6 mg/g body weight). Four hours after gavage, mice were sacrificed, and plasma samples were collected for fluorescence intensity measurement at 490 nm. A standard curve of FD40000 was used to calculate the plasma concentration. Intestinal permeability was obviously impaired in Acss2CKO mice, as determined by FD4 (FITC‑Dextran, MW 40000) gavage.

    FITC-Dextran (MW 40000) purchased from MedChemExpress. Usage Cited in: Biomaterials. 2025 Sep 17:326:123723.  [Abstract]

    The time-dependent variations of normalized fluorescence of FITC-Dextran (40, 70, 150 kDa; 0.5 mg/mL) and FITC-BSA in TNHs with Cp of 70 mg/mL. The inset shows confocal microscopic images of TNHs containing FITC-BSA at different time points after the photo-bleaching in FRAP experiments. The Cp is 70 mg/mL. Scale bar, 50 μm.

    FITC-Dextran (MW 40000) purchased from MedChemExpress. Usage Cited in: Int J Biol Macromol. 2025 Dec 31.

    The phagocytic activity was analyzed using FITC-Dextran (MW 40000) (1 mg/mL; 30 min) by flow cytometry. The values are presented as mean ± SD (n = 3). Significant differences with the control group (Ctrl) were designated as ⁎⁎⁎P < 0.001. The figure shown is representative of three independent experiments.

    FITC-Dextran (MW 40000) purchased from MedChemExpress. Usage Cited in: Food Biosci. 2025 Aug 30;72:107512.

    FITC-Dextran (MW 40000) (1 mg/mL; 6 h) test results of the fluorescence intensity of the solution under the Caco-2 cell barrier. The experiment was repeated six times, n = 6; with “∗” representing P < 0.05; P < 0.05 is considered to indicate a statistically significant difference.

    FITC-Dextran (MW 40000) purchased from MedChemExpress. Usage Cited in: J Control Release. 2024 Nov:375:698-711.  [Abstract]

    Representative images of fluorescein isothiocyanate-conjugated dextran (FITC-Dextran (MW 40000), 100 μg; i.v.; single dose) distribution in normal and infected lung tissues with different treatments. Scale bar: 50 μm.
    • Actividad biológica

    • Pureza y Documentación

    • Referencias

    • Revisión del cliente

    Descripciòn

    FITC-Dextran (MW 40000) is a fluorescent probe for fluorescein isothiocyanate (FITC) dextran (Ex=495 nm; Em=525 nm). FITC-Dextran (MW 40000) can be used as a marker to reveal heat shock-induced cell damage and to study the early and late stages of apoptosis. FITC-Dextran (MW 40000) can also be used for cell permeability studies, such as blood-brain barrier permeability and determination of the extent of blood-brain barrier disruption[1][2][3].

    In Vitro

    Guide (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).

    Labeling of cells[1]:
    For use with apoptotic cells
    1. Incubate cells at 43.5°C for 1 hour and at 37°C for 8 hours to induce apoptosis.
    2. Suspend the cells in 100 μL of medium, and mix in Q-prep tubes with 10 μL of propidium iodide (PI), 10 μL of FITC-Dextran (MW 40000) (the final concentration of PI and FITC-Dextran (MW 40000) is 7.5 μM and 1.13 μM, respectively).
    3. Incubate cells for 25 min at room temperature in the dark.
    4. Take the labeled cells with 3 mL of medium and centrifuge for 10 min at 500 g.
    5. Take centrifuged cells with 1 mL of medium and use flow cytometry or fluorescence microscopy analyze (PI: Ex=500 nm, Em=600 nm; FITC-Dextran (MW 40000): Ex=495 nm, Em=525 nm).


    Paracellular permeability measurement[4]
    1. Add FITC-dextran (0.1 mg/mL) to the basal media in the transwell chamber.
    2. Collect media from the transwell insert after 15 min.
    3. Measure the fluorescence signal (Ex=485 nm, Em=538 nm).
    4. Calculate FITC-dextran concentration based on fluorescence intensity.
    5. Calculate permeability.

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    In Vivo

    Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).
    For intestinal barrier function assay[5]
    1. Fast mice for 4 h.
    2. Orally gavage mice with FITC-Dextran MW 40000 (0.6 mg/g).
    3. Measure fluorescence intensity of plasma in 4 h (excitation nm/emission 520 nm).

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Peso molecular

    40000(Average)

    No. CAS
    Appearance

    Solid

    Color

    Yellow to orange

    Emission (Em)

    525

    Excitation (Ex)

    488

    SMILES

    [FITC-Dextran (MW 40000)]

    Envío

    Room temperature in continental US; may vary elsewhere.

    Almacenamiento

    4°C, protect from light

    *In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

    Solvente y solubilidad
    In Vitro: 

    H2O : 50 mg/mL (Need ultrasonic)

    • Calculadora de molaridad

    • Calculadora de dilución

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
    Pureza y Documentación

    Referencias
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Productos vistos recientemente:

    Consulta en línea

    Your information is safe with us. * Required Fields.

    Nombre del producto

     

    Requested Quantity *

    Nombre del solicitante *

     

    Saludo

    Direcciòn del E-mail *

     

    Número de teléfono *

    Department

     

    Nombre de la Organizaciòn *

    City

    Provincia

    Country or Region *

         

    Observaciones

    Consulta para venta a granel

    Inquiry Information

    Nombre del producto:
    FITC-Dextran (MW 40000)
    Cat. No.:
    HY-128868D
    Cantidad:
    MCE Japan Authorized Agent: