1. Others
  2. Fluorescent Dye
  3. N-Phenylnaphthalen-1-amine

N-Phenyl-1-naphthylamine is a dye that fluoresces strongly when bound to the inner phospholipid bilayer of Gram-negative bacteria. N-Phenyl-1-naphthylamine can be used to measure outer membrane permeability. N-Phenylnaphthalen-1-amine is a fluorescence probe for odorant-binding proteins (OBP) with a dissociation constant of 1.67 μM. N-Phenylnaphthalen-1-amine exhibits an excitation wavelength of 337 nM and an emission wavelength of 407 nM.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 90-30-2

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 27 在庫あり
Solution
10 mM * 1 mL in DMSO USD 27 在庫あり
Solid
25 g $25 在庫あり
50 g $40 在庫あり
100 g $64 在庫あり
500 g $160 在庫あり
1 kg $256 在庫あり

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 3 publication(s) in Google Scholar

Top Publications Citing Use of Products

    N-Phenylnaphthalen-1-amine purchased from MedChemExpress. Usage Cited in: EBioMedicine. 2025 Oct:120:105923.  [Abstract]

    Determination of outer membrane integrity. The outer membrane permeability of mcr-1- or mcr-3-bearing strains was evaluated by measuring the NPN (N-Phenylnaphthalen-1-amine: 20 μM) uptake of logarithmic phase cultures.

    N-Phenylnaphthalen-1-amine purchased from MedChemExpress. Usage Cited in: Environ Pollut. 2025 Sep 10:385:127111.  [Abstract]

    In the presence of PS and PLA microplastics, the uptake of NPN (N-Phenylnaphthalen-1-amine: 10 μM; 30 min) by both donor and recipient bacteria was significantly increased, indicating that the outer membrane was damaged.
    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    N-Phenyl-1-naphthylamine is a dye that fluoresces strongly when bound to the inner phospholipid bilayer of Gram-negative bacteria. N-Phenyl-1-naphthylamine can be used to measure outer membrane permeability. N-Phenylnaphthalen-1-amine is a fluorescence probe for odorant-binding proteins (OBP) with a dissociation constant of 1.67 μM. N-Phenylnaphthalen-1-amine exhibits an excitation wavelength of 337 nM and an emission wavelength of 407 nM[1][2].

    体外実験

    Guide (The following is our recommended protocol. This protocol is only a guide and should be modified according to your specific needs).
    Odorant Binding Protein (OBP) Binding Affinity Assay[1]
    1. Materials Preparation
    Fluorescent probe: N-phenyl-1-naphthylamine, dissolved in methanol (MeOH) to prepare a 1 mM stock solution
    Protein solution: 2 μM odorant binding protein (OBP), dissolved in 50 mM Tris-HCl buffer (pH 7.4)
    Experimental temperature: 25 °C
    Fluorescence spectrophotometer: equipped with a 1 cm quartz cuvette, excitation and emission slit widths set to 5 nm
    Detection wavelengths: Excitation wavelength (λex): 337 nm; Emission wavelength (λem): 407 nm
    2. Fluorescence Binding Assay Procedure
    2.1 Place 2 μM odorant binding protein solution into the cuvette.
    2.2 Gradually add the N-phenyl-1-naphthylamine stock solution (1 mM in methanol), mixing gently after each addition.
    2.3 Set the final concentration range to 1-20 μM.
    2.4 After each addition, immediately record the fluorescence emission spectrum (range 380-460 nm).
    2.5 Measure and record the emission intensity at 407 nm for plotting the binding curve.
    3. Data Analysis
    3.1 Plot fluorescence intensity against the concentration of free N-phenyl-1-naphthylamine.
    3.2 Use a Scatchard plot for linearization and calculation of the binding constant.
    3.3 Assume a 1:1 binding ratio and 100% protein activity.
    2.4 The dissociation constant (Kd) of N-phenyl-1-naphthylamine with loc-OBP1 is 1.67 μM.
    4. Competitive Binding Assay
    4.1 Use a fixed concentration of 2 μM odorant binding protein and 1 μM N-phenyl-1-naphthylamine.
    4.2 Add test ligands (dissolved in methanol) at final concentrations typically ranging from 1-20 μM.
    4.3 Monitor the decrease in fluorescence intensity and plot the competitive binding curve.
    4.4 Calculate the IC50, and then convert it to the dissociation constant (Kd) of the test ligand.

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    219.29

    分子式

    C16H13N

    CAS 番号
    Appearance

    Solid

    Color

    Light brown to brown

    SMILES

    C12=CC=CC=C1C(NC3=CC=CC=C3)=CC=C2

    Initial Source

    Locusta migratoria

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件

    4°C, protect from light

    *In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

    溶剤 & 溶解度
    体外: 

    DMSO : ≥ 100 mg/mL (456.02 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 4.5602 mL 22.8009 mL 45.6017 mL
    5 mM 0.9120 mL 4.5602 mL 9.1203 mL
    10 mM 0.4560 mL 2.2801 mL 4.5602 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    純度とドキュメンテーション

    純度: 99.98%

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 4.5602 mL 22.8009 mL 45.6017 mL 114.0043 mL
    5 mM 0.9120 mL 4.5602 mL 9.1203 mL 22.8009 mL
    10 mM 0.4560 mL 2.2801 mL 4.5602 mL 11.4004 mL
    15 mM 0.3040 mL 1.5201 mL 3.0401 mL 7.6003 mL
    20 mM 0.2280 mL 1.1400 mL 2.2801 mL 5.7002 mL
    25 mM 0.1824 mL 0.9120 mL 1.8241 mL 4.5602 mL
    30 mM 0.1520 mL 0.7600 mL 1.5201 mL 3.8001 mL
    40 mM 0.1140 mL 0.5700 mL 1.1400 mL 2.8501 mL
    50 mM 0.0912 mL 0.4560 mL 0.9120 mL 2.2801 mL
    60 mM 0.0760 mL 0.3800 mL 0.7600 mL 1.9001 mL
    80 mM 0.0570 mL 0.2850 mL 0.5700 mL 1.4251 mL
    100 mM 0.0456 mL 0.2280 mL 0.4560 mL 1.1400 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    N-Phenylnaphthalen-1-amine
    製品番号:
    HY-W009756
    数量:
    MCE 日本正規代理店: