Bromocresol green

Name: Bromocresol green
Brand: MedChemExpress
SKU: HY-W040144
Rating: 4.5 (0 reviews)

製品番号: HY-W040144 純度: 99.59%: Data Sheet SDS COA 取扱説明書
FAQs
Technical Support

Bromocresol green is a pH-sensitive triphenylmethane dye commonly used for the determination of protein and albumin in serum. Bromocresol green is a bio-based dye with a yellow-green to blue-green color. Bromocresol green turns yellow (λmax=435 nm, protonated form) when placed in acidic solution (e.g. pH=4.15), and turns blue in basic solution (λmax=615 nm, deprotonated form). Bromocresol green is widely used as a pH indicator in the field of biochemical analysis. In addition, Bromocresol green is also used to detect the concentration of molecules such as creatinine, and to judge the viability of cells.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Bromocresol green 構造式

CAS 番号 : 76-60-8

容量	価格（税別）	在庫状況	数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO ready for reconstitution	USD 28	在庫あり	Estimated Time of Arrival: December 31
Solution
10 mM * 1 mL in DMSO	USD 28	在庫あり	Estimated Time of Arrival: December 31
Solid
25 g	$26	在庫あり	Estimated Time of Arrival: December 31
50 g	$42	在庫あり	Estimated Time of Arrival: December 31
100 g	$66	在庫あり	Estimated Time of Arrival: December 31
> 100 g		お問い合わせ

or バルクお問い合わせ

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Bromocresol green:

Bromocresol green sodium お問い合わせ

おすすめ

•関連小分子:

•関連タンパク質:

生物活性
純度とドキュメンテーション
参考文献
カスタマーレビュー

製品説明

体外実験

Determination of Bromocresol Green Binding with Human Serum Albumin^[1]
(1) Reagent preparation: Prepare a 0.05 M phosphate buffer or any other needed buffer, adding NaCl if necessary to maintain an ionic strength of at least 0.03. Dissolve Bromocresol Green in water and adjust the pH with NaOH to ensure it forms a divalent anionic form, creating a 0.04% stock solution.
(2) Sample preparation: Prepare a solution of human serum albumin. After determining the nitrogen content using the Kjeldahl method, dilute it with the required buffer to create a solution with an appropriate concentration of albumin. Depending on the experimental design, prepare buffers of different pH values and different concentrations of Bromocresol Green solution.
(3) Binding experiment: Under set pH conditions (e.g., pH 6.95), add a certain amount of Bromocresol Green to a solution containing a fixed concentration of human serum albumin. Measure the changes in absorbance of the solution at specific wavelengths using a spectrophotometer, and record the data. Pay special attention to changes at 615 nm, as this is where the maximum absorption difference between the free form and the albumin-bound state of Bromocresol Green occurs. Separate the free and bound indicators using ultrafiltration and measure the absorbance again.
(4) Data analysis: Analyze the absorbance data to determine the binding constant and the number of binding sites. Use the Scatchard plot analysis method to estimate the number of binding sites and their respective binding constants. Compare the experimental data with theoretical curves to evaluate the effect of different pH values on binding.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Bromocresol green 関連抗体

分子量

698.01

分子式

C₂₁H₁₄Br₄O₅S

CAS 番号

76-60-8

Appearance

Solid

Color

Off-white to light brown

SMILES

O=S1(OC(C2=CC(Br)=C(O)C(Br)=C2C)(C3=CC(Br)=C(O)C(Br)=C3C)C4=CC=CC=C41)=O

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

RT, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (RT, stored under nitrogen)

溶剤 & 溶解度

体外:

DMSO : 100 mg/mL (143.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions

Concentration Solvent Mass	1 mg	5 mg	10 mg

1 mM	1.4326 mL	7.1632 mL	14.3264 mL
5 mM	0.2865 mL	1.4326 mL	2.8653 mL
10 mM	0.1433 mL	0.7163 mL	1.4326 mL

View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

Molarity Calculator
Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Concentration _(start) × Volume _(start) = Concentration _(final) × Volume _(final)

一般には略語で表示されます：C₁V₁ = C₂V₂

濃度 _（開始）

体積 _（開始）

濃度 _（終了）

体積 _（終了）

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

Protocol 1

Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.58 mM); Clear solution

This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

In Vivo Dissolution Calculator

Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.

Please enter your animal formula composition:

DMSO +

Tween-80 +

Saline

Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.

The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).

Calculation results:

Working solution concentration: mg/mL

Method for preparing stock solution: mg drug dissolved in μL DMSO (Stock solution concentration: mg/mL).

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).

Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.

If the continuous dosing period exceeds half a month, please choose this protocol carefully.

Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.

純度とドキュメンテーション

純度: 99.59%

Select Batch:

データシート (285 KB) SDS (396 KB)

COA (264 KB) HNMR (130 KB) RP-HPLC (246 KB) MS (73 KB)

取扱説明書 (2659 KB)

参考文献

[1]. Delanghe S, et al. Binding of bromocresol green and bromocresol purple to albumin in hemodialysis patients. Clin Chem Lab Med. 2018 Feb 23;56(3):436-440. [Content Brief]

[2]. Jurmanović S, et al. Organically modified silicate thin films doped with colourimetric pH indicators methyl red and bromocresol green as pH responsive sol–gel hybrid materials[J]. Thin Solid Films, 2010, 518(8): 2234-2240.

[3]. Chaiyo S, et al. A novel paper-based colorimetry device for the determination of the albumin to creatinine ratio. Analyst. 2018 Nov 5;143(22):5453-5460. [Content Brief]

[4]. Hou H, et al. Single-cell pH imaging and detection for pH profiling and label-free rapid identification of cancer-cells. Sci Rep. 2017 May 11;7(1):1759. [Content Brief]

Complete Stock Solution Preparation Table

Optional Solvent	Concentration Solvent Mass	1 mg	5 mg	10 mg	25 mg

DMSO	1 mM	1.4326 mL	7.1632 mL	14.3264 mL	35.8161 mL
	5 mM	0.2865 mL	1.4326 mL	2.8653 mL	7.1632 mL
	10 mM	0.1433 mL	0.7163 mL	1.4326 mL	3.5816 mL
	15 mM	0.0955 mL	0.4775 mL	0.9551 mL	2.3877 mL
	20 mM	0.0716 mL	0.3582 mL	0.7163 mL	1.7908 mL
	25 mM	0.0573 mL	0.2865 mL	0.5731 mL	1.4326 mL
	30 mM	0.0478 mL	0.2388 mL	0.4775 mL	1.1939 mL
	40 mM	0.0358 mL	0.1791 mL	0.3582 mL	0.8954 mL
	50 mM	0.0287 mL	0.1433 mL	0.2865 mL	0.7163 mL
	60 mM	0.0239 mL	0.1194 mL	0.2388 mL	0.5969 mL
	80 mM	0.0179 mL	0.0895 mL	0.1791 mL	0.4477 mL
	100 mM	0.0143 mL	0.0716 mL	0.1433 mL	0.3582 mL