1. Others
  2. Biochemical Assay Reagents
  3. 3X FLAG peptide

3X FLAG peptides are FLAG-tagged peptides containing three repeats of the Asp-Tyr-Lys-Xaa-Xaa-Asp motif. 3X FLAG peptide can be used for protein separation and purification, and competitive elution with target proteins.

Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.

Kundenspezifische Peptidsynthese

3X FLAG peptide

3X FLAG peptide Chemische Struktur

CAS. Nr. : 402750-12-3

Größe Preis Verfügbarkeit Menge
1 mg Auf Lager
5 mg Auf Lager
10 mg Auf Lager
25 mg Auf Lager
50 mg   Angebot einholen  
100 mg   Angebot einholen  

* Bitte wählen Sie Menge, bevor Sie Artikel hinzufügen.

This product is a controlled substance and not for sale in your territory.

Kundenbewertung

Based on 24 publication(s) in Google Scholar

Other Forms of 3X FLAG peptide:

Top Publications Citing Use of Products
  • Biologische Aktivität

  • Reinheit & Dokumentation

  • Verweise

  • Kundenbewertung

Beschreibung

3X FLAG peptides are FLAG-tagged peptides containing three repeats of the Asp-Tyr-Lys-Xaa-Xaa-Asp motif. 3X FLAG peptide can be used for protein separation and purification, and competitive elution with target proteins.

In Vitro

1. Purification of FLAG tagged proteins through 3X FLAG peptide competition[2]
(1) Plasmid transfection: Transfect plasmids of mIRS-1, hIRS-1, or their mutants labeled with FLAG into 293 T cells for 2 days.
(2) Cell collection: Cells were harvested by centrifugation at 14000 rpm for 10 minutes at 4 °C, and lysed with HEPES buffer (150 mM NaCl, 50 mM HEPES, pH 7.4, 5 mM EDTA, 1% (w/v) sodium deoxycholate, 1% (v/v) Triton X-100, 0.2% sodium fluoride, 0.1% sodium orthovanadate, and protease inhibitor mixture).
(3) Using Anti-FLAG magnetic beads for protein separation and purification: Add Anti-Flag magnetic beads (HY-K0207)/Anti-c-Myc magnetic beads (1 μm) (HY-K0217) to the cell lysate, and incubate at room temperature for 2 hours or at 4 °C overnight. Then wash with a washing buffer and elute with a buffer containing 1 mg/mL 3X FLAG. Finally, use a gel filtration column for further purification of the supernatant, which is equilibrated with the storage buffer. All purified proteins are concentrated using centrifugal filtration and aliquoted for storage at -80 °C.
(4) Protein quantification and validation: The purified protein was quantified using an ND-2000 NanoDrop spectrophotometer with OD 280 and validated by Coomassie Brilliant Blue staining.
2. Co-IP and co-IP-MS analysis using the 3X FLAG peptide[3]
(1) Centrifuge the cell lysate at 13300 rpm for 15 minutes at 4 °C to remove intact cells.
(2) The supernatant was incubated overnight with control immunoglobulin G (IgG) or primary antibody in immunoprecipitation buffer (150 mM NaCl, 20 mM HEPES, pH 7.4, 1% Triton X-100, 12.5 mM β - glycerophosphate, 1.5 mM MgCl2, 2 mM EGTA, containing phosphatase and protease inhibitors), and then incubated with 20 μL resuspended A/G protein beads at 4 °C for 2 hours to precipitate bound proteins.
(3) For continuous immunoprecipitation, incubate 3X FLAG eluent solution (final concentration 150 μg/mL) with 5 times the volume of gel at 4 °C for 2 hours, elute the bound protein from beads, followed by Western blotting.
(4) Alternatively, the samples were run on SDS-PAGE gel and then dyed (Bio Rad). Subsequently, cut off the tape, decolorize, digest with trypsin, and perform MS analysis to determine individual proteins using liquid chromatography-MS.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Molekulargewicht

2861.87

Formel

C120H169N31O49S

CAS. Nr.
Appearance

Solid

Color

White to off-white

Sequence

Met-Asp-Tyr-Lys-Asp-His-Asp-Gly-Asp-Tyr-Lys-Asp-His-Asp-Ile-Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys

Sequence Shortening

MDYKDHDGDYKDHDIDYKDDDDK

Versand

Room temperature in continental US; may vary elsewhere.

Speicherung

Sealed storage, away from moisture

Powder -80°C 2 years
-20°C 1 year

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

Lösungsmittel & Löslichkeit
In Vitro: 

H2O : 33.33 mg/mL (11.65 mM; ultrasonic and adjust pH to 2 with 1 M HCL)

DMSO : 10 mg/mL (3.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 0.3494 mL 1.7471 mL 3.4942 mL
5 mM 0.0699 mL 0.3494 mL 0.6988 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • Molaritätsrechner

  • Verdünnungsrechner

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 50 mg/mL (17.47 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
Reinheit & Dokumentation

Purity: 99.97%

Verweise

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO / H2O 1 mM 0.3494 mL 1.7471 mL 3.4942 mL 8.7355 mL
H2O 5 mM 0.0699 mL 0.3494 mL 0.6988 mL 1.7471 mL
10 mM 0.0349 mL 0.1747 mL 0.3494 mL 0.8736 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Ihre kürzlich angesehenen Produkte:

Online-Anfrage

Your information is safe with us. * Required Fields.

Produktname

 

Requested Quantity *

Name des Antragstellers *

 

Anrede

E-Mail-Addresse *

 

Telefonnummer *

Department

 

Name der Organisation *

City

Bundesland

Country or Region *

     

Bemerkungen

Massenanfrage

Inquiry Information

Produktname:
3X FLAG peptide
Art. -Nr.:
HY-P0319
Menge:
MCE Japan Authorized Agent: