LCL521 dihydrochloride
Based on 2 publication(s) in Google Scholar
LCL521 dihydrochloride is an acid ceramidase (ACDase) inhibitor. LCL521 also inhibits the lysosomal acid sphingomyelinase (ASMase).
For research use only. We do not sell to patients.
- Purity: 98.12%
- CAS No.: 1226759-47-2
- Formula: C31H54Cl2N4O7
- Molecular Weight:665.69
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) LCL521 dihydrochloride
MoreAll Phospholipase Isoforms
More
Biological Activity
ACDase, ASMase[1]
LCL521 (1 µM) acts as a potent inhibitor of cellular ACDase activity, whereas 10 µM LCL521 has an additional, decreased affect on the α-form of this enzyme. LCL521 (10µM) causes a time-dependent (1 hours and 5 hours) decrease of the α-ACDase form in MCF7 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1226759-47-2
-
Appearance Solid
-
Molecular Weight 665.69
-
Formula C31H54Cl2N4O7
-
Color Off-white to light yellow
-
SMILES
O=C(CN(C)C)O[C@H](C1=CC=C([N+]([O-])=O)C=C1)[C@@H](COC(CN(C)C)=O)NC(CCCCCCCCCCCCC)=O.[H]Cl.[H]Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Immunol
2023 May;24(5):802-813. PMID: 36959292 -
Hum Mol Genet
Inhibition or genetic reduction of ASAH1/acid ceramidase restore α-synuclein clearance in mutant GBA1 dopamine neurons from Parkinson's patients. [Abstract]2025 Dec 4;34(24):2075-2087. PMID: 41224733
Solvent & Solubility
DMSO : 100 mg/mL (150.22 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 25 mg/mL (37.56 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 50 mg/mL (75.11 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (419 KB)
- English - EN (419 KB)
- Français - FR (419 KB)
- Deutsch - DE (419 KB)
- Norwegian - NO (419 KB)
- Español - ES (419 KB)
- Swedish - SV (419 KB)
- Italian - IT (419 KB)
- Korean - KR (419 KB)
- Portuguese - PT (419 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.5022 mL | 7.5110 mL | 15.0220 mL | 37.5550 mL |
| 5 mM | 0.3004 mL | 1.5022 mL | 3.0044 mL | 7.5110 mL | |
| 10 mM | 0.1502 mL | 0.7511 mL | 1.5022 mL | 3.7555 mL | |
| 15 mM | 0.1001 mL | 0.5007 mL | 1.0015 mL | 2.5037 mL | |
| 20 mM | 0.0751 mL | 0.3756 mL | 0.7511 mL | 1.8778 mL | |
| 25 mM | 0.0601 mL | 0.3004 mL | 0.6009 mL | 1.5022 mL | |
| 30 mM | 0.0501 mL | 0.2504 mL | 0.5007 mL | 1.2518 mL | |
| DMSO | 40 mM | 0.0376 mL | 0.1878 mL | 0.3756 mL | 0.9389 mL |
| 50 mM | 0.0300 mL | 0.1502 mL | 0.3004 mL | 0.7511 mL | |
| 60 mM | 0.0250 mL | 0.1252 mL | 0.2504 mL | 0.6259 mL | |
| 80 mM | 0.0188 mL | 0.0939 mL | 0.1878 mL | 0.4694 mL | |
| 100 mM | 0.0150 mL | 0.0751 mL | 0.1502 mL | 0.3756 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.