1. Others
  2. Biochemical Assay Reagents Environmental Pollutants
  3. Phthalaldehyde

Phthalaldehyde  (Synonyms: Phthaldialdehyde)

製品番号: HY-W012669 純度: 99.80%
COA 取扱説明書 Technical Support

Phthalaldehyde (Phthaldialdehyde) reacts with proteins containing primary amines and blocked amino-terminal peptides of amino acids. Phthalaldehyde stabilizes bacterial outer membranes and cell walls, increases the optical density of bacterial cell suspensions, and inhibits bacterial lysis induced by ethylenediaminetetraacetic acid and sodium dodecyl sulfate. Phthalaldehyde exhibits bactericidal activity against Gram-negative vegetative bacteria.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Phthalaldehyde

Phthalaldehyde 構造式

CAS 番号 : 643-79-8

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 27 在庫あり
Solution
10 mM * 1 mL in DMSO USD 27 在庫あり
Solid
25 g $25 在庫あり
50 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Phthalaldehyde:

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Phthalaldehyde (Phthaldialdehyde) reacts with proteins containing primary amines and blocked amino-terminal peptides of amino acids. Phthalaldehyde stabilizes bacterial outer membranes and cell walls, increases the optical density of bacterial cell suspensions, and inhibits bacterial lysis induced by ethylenediaminetetraacetic acid and sodium dodecyl sulfate. Phthalaldehyde exhibits bactericidal activity against Gram-negative vegetative bacteria[1][2].

体外実験

Phthalaldehyde (0.0025% (w/v); 1-180 min) reacts with lysine, glycine, and histidine to produce distinct UV absorption peaks at both acidic and alkaline pH, with reaction rates accelerating at higher pH; specific peak patterns and development times vary by amino acid[1].
Phthalaldehyde (0.05-0.2% (w/v); 2 h at 20 °C) induces dark color changes in pellets of Gram-negative (E. coli, P. aeruginosa) and Gram-positive (S. aureus) bacteria, with darker colors observed at alkaline pH and higher OPA concentration[1].
Phthalaldehyde (0.1% (w/v); 30 min at 20 °C) significantly inhibits EDTA-Tris induced lysis of Pseudomonas aeruginosa PA01[1].
Phthalaldehyde (0.1% (w/v); 30 min at 20 °C) significantly inhibits lysostaphin-induced lysis of Staphylococcus aureus NCTC 6571, with efficacy comparable to glutaraldehyde[1].
Phthalaldehyde (0.25-0.5% (w/v); 60 min) significantly increases the absorbance of Escherichia coli ATCC 9481, Staphylococcus aureus NCTC 6571, and Pseudomonas aeruginosa PA01 suspensions, with a greater increase in E. coli absorbance observed at the 0.5% (w/v) concentration[1].
Phthalaldehyde detects the blocked amino-terminal tryptic peptide of rat liver acyl-CoA oxidase by forming a fluorescent Schiff base with the peptide's free α-amino group[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

134.13

分子式

C8H6O2

CAS 番号
Appearance

Solid

Color

Off-white to yellow

SMILES

O=CC1=CC=CC=C1C=O

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

溶剤 & 溶解度
体外: 

DMSO : 200 mg/mL (1491.09 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 7.4555 mL 37.2773 mL 74.5545 mL
5 mM 1.4911 mL 7.4555 mL 14.9109 mL
10 mM 0.7455 mL 3.7277 mL 7.4555 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
純度とドキュメンテーション

純度: 99.81%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 7.4555 mL 37.2773 mL 74.5545 mL 186.3863 mL
5 mM 1.4911 mL 7.4555 mL 14.9109 mL 37.2773 mL
10 mM 0.7455 mL 3.7277 mL 7.4555 mL 18.6386 mL
15 mM 0.4970 mL 2.4852 mL 4.9703 mL 12.4258 mL
20 mM 0.3728 mL 1.8639 mL 3.7277 mL 9.3193 mL
25 mM 0.2982 mL 1.4911 mL 2.9822 mL 7.4555 mL
30 mM 0.2485 mL 1.2426 mL 2.4852 mL 6.2129 mL
40 mM 0.1864 mL 0.9319 mL 1.8639 mL 4.6597 mL
50 mM 0.1491 mL 0.7455 mL 1.4911 mL 3.7277 mL
60 mM 0.1243 mL 0.6213 mL 1.2426 mL 3.1064 mL
80 mM 0.0932 mL 0.4660 mL 0.9319 mL 2.3298 mL
100 mM 0.0746 mL 0.3728 mL 0.7455 mL 1.8639 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Phthalaldehyde
製品番号:
HY-W012669
数量:
MCE 日本正規代理店: