1. Others Anti-infection
  2. Environmental Pollutants Bacterial
  3. Chloramine-T

クロラミンT  (Synonyms: Chloramine-T)

製品番号: HY-B0959 純度: 98.0%
COA 取扱説明書 Technical Support

Chloramine-T is a titrimetric reagent, and an oxidizing agent. Chloramine-T is an oxidizing biocide.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Chloramine-T

クロラミンT 構造式

CAS 番号 : 127-65-1

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 27 在庫あり
Solution
10 mM * 1 mL in DMSO USD 27 在庫あり
Solid
1 g $25 在庫あり
5 g $50 在庫あり
10 g $65 在庫あり
50 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Chloramine-T is a titrimetric reagent, and an oxidizing agent. Chloramine-T is an oxidizing biocide[1][2].

体外実験

Chloramine-T direct titration method[2]
1. Dilute the thiol solution (1-5 ml) with distilled water (20-30 ml).
2. Add potassium iodide (~0.5 g) and titrate with standard Chloramine-T solution, using starch (1 ml of 1 % solution), carbon tetrachloride, chloroform, carbon disulfide and benzene (2 ml) as indicators.
3. Add enough concentrated hydrochloric acid to the 2-mercaptoethanol solution to make the acid concentration 0.55 M before titration.

Chloramine-T potentiometric titration method[2]
1. Place a known volume of thiol solution (2-10 ml) in a 100 ml titration cell and dilute the solution with 50 ml of water.
2. Titrate using a potentiometric titration apparatus.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

227.64

分子式

C7H7ClNNaO2S

CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

O=S(C1=CC=C(C)C=C1)(N([Na])Cl)=O

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶剤 & 溶解度
体外: 

DMSO : 130 mg/mL (571.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H2O : ≥ 41 mg/mL (180.11 mM)

*"≥" means soluble, but saturation unknown.

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 4.3929 mL 21.9645 mL 43.9290 mL
5 mM 0.8786 mL 4.3929 mL 8.7858 mL
10 mM 0.4393 mL 2.1965 mL 4.3929 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 3.25 mg/mL (14.28 mM); Clear solution

    This protocol yields a clear solution of ≥ 3.25 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 3.25 mg/mL (14.28 mM); Clear solution

    This protocol yields a clear solution of ≥ 3.25 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 100 mg/mL (439.29 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
純度とドキュメンテーション

純度: 98.0%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
H2O / DMSO 1 mM 4.3929 mL 21.9645 mL 43.9290 mL 109.8225 mL
5 mM 0.8786 mL 4.3929 mL 8.7858 mL 21.9645 mL
10 mM 0.4393 mL 2.1965 mL 4.3929 mL 10.9823 mL
15 mM 0.2929 mL 1.4643 mL 2.9286 mL 7.3215 mL
20 mM 0.2196 mL 1.0982 mL 2.1965 mL 5.4911 mL
25 mM 0.1757 mL 0.8786 mL 1.7572 mL 4.3929 mL
30 mM 0.1464 mL 0.7322 mL 1.4643 mL 3.6608 mL
40 mM 0.1098 mL 0.5491 mL 1.0982 mL 2.7456 mL
50 mM 0.0879 mL 0.4393 mL 0.8786 mL 2.1965 mL
60 mM 0.0732 mL 0.3661 mL 0.7322 mL 1.8304 mL
80 mM 0.0549 mL 0.2746 mL 0.5491 mL 1.3728 mL
100 mM 0.0439 mL 0.2196 mL 0.4393 mL 1.0982 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Chloramine-T
製品番号:
HY-B0959
数量:
MCE 日本正規代理店: