IDE1
Based on 1 publication(s) in Google Scholar
IDE1 is an inducer of definitive endoderm 1.
For research use only. We do not sell to patients.
- Purity: 99.13%
- CAS No.: 1160927-48-9
- Formula: C15H18N2O5
- Molecular Weight:306.31
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Immunology/Inflammation Compound Library
HY-L007
-
Stem Cell Signaling Compound Library
HY-L017
-
Anti-Aging Compound Library
HY-L034
-
Cysteine Targeted Covalent Library
HY-L153
-
MCE Bioactive Compound Library
HY-L001V
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) IDE1
More
Biological Activity
IDE1 enhances the definitive endoderm (DE) differentiation of human-induced pluripotent stem cells (hiPSCs) with Activin A/Wnt3a being significantly more potent in both 2D and 3D cultures compared to IDE1. IDE1 could efficiently induces DE differentiation through various protocols in vitro. Treatment of the hiPSCs-derived EBs with IDE-1 shows minor increase (p<0.01) of DE-markers cells compared to Activin A/Wnt3a treatment. IDE1 possess several advantages over other inducing factors including high permeability, influence, diversity, low cost, and easy to use and for the first time, Melton’s team showed that Activin A can be substituted by two cell-permeable small molecules, IDE1 and IDE2. IDE1 could induce phosphorylation of Smad2 after incubation for 24 h or more at levels comparable to those induced by Activin A treatment. Treatment of hiPSCs with IDE1 (2 mM) also leads to endodermal differentiation but with a significantly lower efficiency than Activin A/Wnt3a[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1160927-48-9
-
Appearance Solid
-
Molecular Weight 306.31
-
Formula C15H18N2O5
-
Color White to off-white
-
SMILES
OC(C1=C(/C=N/NC(CCCCCC(O)=O)=O)C=CC=C1)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Cell Discov
A live-cell image-based machine learning strategy for reducing variability in PSC differentiation systems. [Abstract]2023 Jun 6;9(1):53. PMID: 37280224
Solvent & Solubility
DMSO : ≥ 30 mg/mL (97.94 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2647 mL | 16.3233 mL | 32.6467 mL | 81.6167 mL |
| 5 mM | 0.6529 mL | 3.2647 mL | 6.5293 mL | 16.3233 mL | |
| 10 mM | 0.3265 mL | 1.6323 mL | 3.2647 mL | 8.1617 mL | |
| 15 mM | 0.2176 mL | 1.0882 mL | 2.1764 mL | 5.4411 mL | |
| 20 mM | 0.1632 mL | 0.8162 mL | 1.6323 mL | 4.0808 mL | |
| 25 mM | 0.1306 mL | 0.6529 mL | 1.3059 mL | 3.2647 mL | |
| 30 mM | 0.1088 mL | 0.5441 mL | 1.0882 mL | 2.7206 mL | |
| 40 mM | 0.0816 mL | 0.4081 mL | 0.8162 mL | 2.0404 mL | |
| 50 mM | 0.0653 mL | 0.3265 mL | 0.6529 mL | 1.6323 mL | |
| 60 mM | 0.0544 mL | 0.2721 mL | 0.5441 mL | 1.3603 mL | |
| 80 mM | 0.0408 mL | 0.2040 mL | 0.4081 mL | 1.0202 mL |
IDE1 Related Classifications
HY-100533 Related Classifications
Powered by Bioz