1. Metabolic Enzyme/Protease
  2. HIF/HIF Prolyl-Hydroxylase
  3. KC7F2

KC7F2 is a potent hypoxia inducible factor-1 (HIF-1) pathway inhibitor with an IC50 of 20 μM in LN229-HRE-AP cells, and with potential as a cancer therapy agent.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 927822-86-4

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 69 在庫あり
Solution
10 mM * 1 mL in DMSO USD 69 在庫あり
Solid
5 mg $55 在庫あり
10 mg $66 在庫あり
25 mg $139 在庫あり
50 mg $231 在庫あり
100 mg $341 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 20 publication(s) in Google Scholar

Top Publications Citing Use of Products

    KC7F2 purchased from MedChemExpress. Usage Cited in: J Ethnopharmacol. 2023 May 23:308:116289.  [Abstract]

    KC7F2 upregulates the expression of Bcl2 and downregulates the expression of Bax in L02 cells.

    KC7F2 purchased from MedChemExpress. Usage Cited in: BMC Anesthesiol. 2019 Jul 9;19(1):127.  [Abstract]

    The hCMEC/D3 cells are treated with TNF-α, propofol, and Hif-1α inhibitor (KC7F2, 10 μM). Left side shows the image of a representative Western blot for Hif-1α, VEGF, p-VEGFR-2, p-ERK, ERK and occludin. Right side is the plot of normalized ratios of optical densities. β-actin is served as internal loading control.

    HIF/HIF Prolyl-Hydroxylase アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    KC7F2 is a potent hypoxia inducible factor-1 (HIF-1) pathway inhibitor with an IC50 of 20 μM in LN229-HRE-AP cells, and with potential as a cancer therapy agent[1].

    IC50 & Target

    IC50: 20 μM (HIF-1, LN229-HRE-AP cells)[1]

    体外実験

    KC7F2 (15–25 μM; 0-72 hours) exhibits a clear dose-response cytotoxicity with an IC50 value of approximately 15–25 μM depending on the cell lines, and this effect is more severe under hypoxic conditions[1].
    KC7F2 (0-80 μM; 6 hours) specifically reduces the protein levels of HIF-1α in a dose-dependent manner under hypoxic conditions; strongly decrease in HIF-1α levels at concentrations above 20 μM[1].
    KC7F2 does not affect the rate of HIF-1α protein degradation[1].
    KC7F2 inhibits HIF-1α protein synthesis but not its mRNA transcription[1].
    KC7F2 represses the phosphorylation of eukaryotic initiation factor 4E binding protein 1 (4EBP1)[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Cell Cytotoxicity Assay[1]

    Cell Line: MCF7 cells, LNZ308 cells, A549 cells, U251MG cells, LN229 cells
    Concentration: 15–25 μM
    Incubation Time: 0-72 hours
    Result: With cytotoxicity more pronounced in tumor cell lines as compared to normal cells.

    Cell Viability Assay[1]

    Cell Line: LN229 cells
    Concentration: 6 hours
    Incubation Time: 0 μM, 5 μM,7.5 μM,10 μM,15 μM,20 μM,30 μM,40 μM,60 μM,80 μM
    Result: Decreases HIF-1α protein levels in a dose-dependent manner.
    分子量

    570.38

    分子式

    C16H16Cl4N2O4S4

    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O=S(C1=CC(Cl)=CC=C1Cl)(NCCSSCCNS(C2=CC(Cl)=CC=C2Cl)(=O)=O)=O

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : ≥ 32 mg/mL (56.10 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.7532 mL 8.7661 mL 17.5322 mL
    5 mM 0.3506 mL 1.7532 mL 3.5064 mL
    10 mM 0.1753 mL 0.8766 mL 1.7532 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: 2.5 mg/mL (4.38 mM); Clear solution; Need ultrasonic

      This protocol yields a clear solution of 2.5 mg/mL.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% Corn Oil

      Solubility: ≥ 2.5 mg/mL (4.38 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 1.7532 mL 8.7661 mL 17.5322 mL 43.8304 mL
    5 mM 0.3506 mL 1.7532 mL 3.5064 mL 8.7661 mL
    10 mM 0.1753 mL 0.8766 mL 1.7532 mL 4.3830 mL
    15 mM 0.1169 mL 0.5844 mL 1.1688 mL 2.9220 mL
    20 mM 0.0877 mL 0.4383 mL 0.8766 mL 2.1915 mL
    25 mM 0.0701 mL 0.3506 mL 0.7013 mL 1.7532 mL
    30 mM 0.0584 mL 0.2922 mL 0.5844 mL 1.4610 mL
    40 mM 0.0438 mL 0.2192 mL 0.4383 mL 1.0958 mL
    50 mM 0.0351 mL 0.1753 mL 0.3506 mL 0.8766 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    KC7F2
    製品番号:
    HY-18777
    数量:
    MCE 日本正規代理店: