Substance P(1-7) TFA
Based on 1 Customer Validation
Substance P(1-7) TFA is a fragment of the neuropeptide, substance P (SP). Substance P(1-7) TFA gives depressor and bradycardic effects when applied to the nucleus tractus solitarius.
For research use only. We do not sell to patients.
- Purity: 99.14%
- CAS No.: 2828433-22-1
- Formula: C43H66F3N13O12
- Molecular Weight:1014.06
-
Storage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2828433-22-1
-
Appearance Solid
-
Molecular Weight 1014.06
-
Formula C43H66F3N13O12
-
Color White to off-white
-
Sequence
Arg-Pro-Lys-Pro-Gln-Gln-Phe
-
Sequence Shortening
RPKPQQF
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
H2O : ≥ 50 mg/mL (49.31 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (98.61 mM); Clear solution; Need ultrasonic
Protocol
Rats[1]
Sprague-Dawley male rats weighing 250-300 g are anaesthetized with halothane and placed in a stereotaxic frame. An injection cannula, conically shaped with a penetration tip diameter of approximately 0.15 mm is loared into the SNR. Saline (0.2 μL), SP (0.007-0.7 nmol) or Substance P(1-7) (0.01-1 nmol) is injected into the left substantia nigra, pars reticulata (SNR) and the rat is placed in a rotometer. The substances are injected in a total volume of 0.2 μL over a period of 1 min. A group of animals is sacrificed by decapitation 1 hour after the injection, their brains are immediately removed and tissue samples are taken from left and right striatum, globus pallidum (GP) and substantia nigra (SN). Samples are assayed for SP and SP(1-7)[1].
Mice[2]
The accumulated response time (s) of reciprocal movements of hindlimb scratching, biting, fore- and hindpaw licking are measured in Male mice (STD strain, 23-28 g) during the whole period of aversive response and 20 min at maximum. Substance P(1-7) is tested for its ability to inhibit the aversive response produced by intrathecal injection of SP or SP(5-11) (0.1 nM/mouse). Substance P (1-7) (1, 2, 4 pmol) is then administered together with SP or SP(5-11)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (282 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Herrera-Marschitz M, et al. The substance P(1-7) fragment is a potent modulator of substance P actions in the brain. Brain Res. 1990 Jun 25;521(1-2):316-20. [Content Brief]
[2]. Sakurada T, et al. Substance P(1-7) antagonizes substance P-induced aversive behaviour in mice. Neurosci Lett. 1988 Dec 19;95(1-3):281-5. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 0.9861 mL | 4.9307 mL | 9.8613 mL | 24.6534 mL |
| 5 mM | 0.1972 mL | 0.9861 mL | 1.9723 mL | 4.9307 mL | |
| 10 mM | 0.0986 mL | 0.4931 mL | 0.9861 mL | 2.4653 mL | |
| 15 mM | 0.0657 mL | 0.3287 mL | 0.6574 mL | 1.6436 mL | |
| 20 mM | 0.0493 mL | 0.2465 mL | 0.4931 mL | 1.2327 mL | |
| 25 mM | 0.0394 mL | 0.1972 mL | 0.3945 mL | 0.9861 mL | |
| 30 mM | 0.0329 mL | 0.1644 mL | 0.3287 mL | 0.8218 mL | |
| 40 mM | 0.0247 mL | 0.1233 mL | 0.2465 mL | 0.6163 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.