1. Anti-infection
  2. Bacterial Fungal
  3. Hexetidine

Hexetidine  (Synonyms: NSC-17764)

製品番号: HY-B0996 純度: 98.0%
COA 取扱説明書 Technical Support

Hexetidine (NSC-17764) is an orally active antibacterial and antifungal agent with broad antibacterial and antifungal activity. Hexetidine combined with IPBC potentiates strong fungal growth inhibition properties. Hexetidine at concentrations greater than 0.1% can cause oral ulceration. Additionally, Hexetidine improves its plaque inhibiting activities combined with zinc and has been confirmed the effectiveness on purulent wound along with ultrasound. Hexetidine is a promising candidate for research in fungus-related diseases and soft tissue purulent-inflammatory

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Hexetidine

Hexetidine 構造式

CAS 番号 : 141-94-6

容量 価格(税別) 在庫状況 数量
Liquid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 55 在庫あり
Solution
10 mM * 1 mL in DMSO USD 55 在庫あり
Liquid
25 mg $50 在庫あり
50 mg $80 在庫あり
100 mg $120 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Hexetidine:

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Hexetidine (NSC-17764) is an orally active antibacterial and antifungal agent with broad antibacterial and antifungal activity. Hexetidine combined with IPBC potentiates strong fungal growth inhibition properties. Hexetidine at concentrations greater than 0.1% can cause oral ulceration. Additionally, Hexetidine improves its plaque inhibiting activities combined with zinc and has been confirmed the effectiveness on purulent wound along with ultrasound. Hexetidine is a promising candidate for research in fungus-related diseases and soft tissue purulent-inflammatory[1][2][3][4][5]

体外実験

Hexetidine (15 μM, 14 days) retains strong inhibition of T. virens growth after incorporation within the alginate gel combined with iodopropynyl-butyl-carbamate (IPBC) (250 μg/ml)[1].
Hexetidine (1 mg/ml, 2 h) exhibits the rates of kill similar for both S. aureus and Ps. aeruginosa with no detectable survivors in either growth phase within 2 h of contact[6].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Viability Assay[1]

Cell Line: Human Rhabdomyosarcoma cell lines
Concentration: 20 μM
Incubation Time: 24 h
Result: Did not significantly potentiate the effect of IPBC combined with Trifluoperazine (TFZ) (HY-B0532) against the human rhabdomyosarcoma cell lines, suggesting that the combinatorial effects were specific to the fungi.​
体内実験

Hexetidine (0.5 g, p.o., 15-19 days) shows significantly better effectiveness on a purulent wound of rats combined with photoditazine s than their isolated use[4].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: Male Wistar rats with a purulent wound[4].
Dosage: 0.5 g
Administration: smeared for 15-19 days
Result: Showed significantly better results combined with photoditazine in the first and second phases of the course of the wound process than did their isolated use.
臨床実験
分子量

339.60

分子式

C21H45N3

CAS 番号
Appearance

Liquid (Density: 0.889 g/cm3)

Color

Colorless to light yellow

SMILES

NC1(C)CN(CC(CC)CCCC)CN(CC(CC)CCCC)C1

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件
Pure form -20°C 3 years
  4°C 2 years
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

DMSO : 200 mg/mL (588.93 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Ethanol : 100 mg/mL (294.46 mM; Need ultrasonic)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.9446 mL 14.7232 mL 29.4464 mL
5 mM 0.5889 mL 2.9446 mL 5.8893 mL
10 mM 0.2945 mL 1.4723 mL 2.9446 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (6.12 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.08 mg/mL (6.12 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: ≥98.0%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
Ethanol / DMSO 1 mM 2.9446 mL 14.7232 mL 29.4464 mL 73.6160 mL
5 mM 0.5889 mL 2.9446 mL 5.8893 mL 14.7232 mL
10 mM 0.2945 mL 1.4723 mL 2.9446 mL 7.3616 mL
15 mM 0.1963 mL 0.9815 mL 1.9631 mL 4.9077 mL
20 mM 0.1472 mL 0.7362 mL 1.4723 mL 3.6808 mL
25 mM 0.1178 mL 0.5889 mL 1.1779 mL 2.9446 mL
30 mM 0.0982 mL 0.4908 mL 0.9815 mL 2.4539 mL
40 mM 0.0736 mL 0.3681 mL 0.7362 mL 1.8404 mL
50 mM 0.0589 mL 0.2945 mL 0.5889 mL 1.4723 mL
60 mM 0.0491 mL 0.2454 mL 0.4908 mL 1.2269 mL
80 mM 0.0368 mL 0.1840 mL 0.3681 mL 0.9202 mL
100 mM 0.0294 mL 0.1472 mL 0.2945 mL 0.7362 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Hexetidine
製品番号:
HY-B0996
数量:
MCE 日本正規代理店: