2. Apoptosis
  3. IAP
  4. BV6

BV6 is an antagonist of cIAP1 and XIAP, members of the inhibitors of apoptosis (IAP) family. BV6 shows an IC50 of 7.2 μM in MTS assays in HCC193 cells. BV6 can be used in the research of endometrial cancer and endometriosis.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 1001600-56-1

容量 価格（税別） 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 251 在庫あり
Solution
10 mM * 1 mL in DMSO USD 251 在庫あり
Solid
1 mg $56 在庫あり
5 mg $119 在庫あり
10 mg $190 在庫あり
25 mg $380 在庫あり
50 mg $608 在庫あり
100 mg $970 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 22 publication(s) in Google Scholar

Other Forms of BV6:

BV6 関連抗体

Top Publications Citing Use of Products

    BV6 purchased from MedChemExpress. Usage Cited in: Nat Commun. 2018 Mar 19;9(1):1136.   [Abstract]

    Western Blot analysis of p52, p100, NIK, c-IAP2, Peli1, and HSP60 in total lysis of control and Peli1-knockdown M12 cells that pretreated with DMSO or smac mimetic BV6 for 4 h, and then stimulated with anti-CD40 (αCD40) at the indicated time points.

    BV6 purchased from MedChemExpress. Usage Cited in: Nat Commun. 2018 Mar 19;9(1):1136.   [Abstract]

    Western Blot analysis of p52, p100, NIK, c-IAP2, Peli1, and HSP60 in total lysis of control and Peli1-knockdown M12 cells that pretreated with DMSO or smac mimetic BV6 for 4 h, and then stimulated with BAFF at the indicated time points.

    BV6 purchased from MedChemExpress. Usage Cited in: Nat Commun. 2018 Mar 19;9(1):1136.   [Abstract]

    Analysis of Lys48 ubiquitination of NIK in control and Peli1-knockdown M12 cells that pretreated with DMSO or smac mimetic BV6 for 4 h, then left unstimulated or stimulated with anti-CD40 (αCD40) for 4 h in the presence of MG132.

    IAP アイソフォーム固有の製品をすべて表示:

    すべてのアイソフォームを表示
    cIAP cIAP-1 cIAP-2 XIAP

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    BV6 is an antagonist of cIAP1 and XIAP, members of the inhibitors of apoptosis (IAP) family. BV6 shows an IC50 of 7.2 μM in MTS assays in HCC193 cells. BV6 can be used in the research of endometrial cancer and endometriosis[1][2].

    IC50 & Target

    IAP[1]
    体外実験

    BV6 (250 nM-30 μM, 24 h) induces apoptosis in HCC193 and H460 lung cancer cell lines in a concentration- and time-dependent manner. BV6 can also enhance the sensitivity of HCC193 and H460 cell lines to radiation[1].
    BV6 (1μM 24 h; 5 μM, 48 h) significantly sensitizes the cell to radiation (HCC193-DER=1.38, at 1 μM BV6; H460-DER=1.42, at 5 μM BV6)[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    BV6 関連抗体

    Cell Viability Assay[1]

    Cell Line: HCC193 cells, H460 cells
    Concentration: 250 nM, 500 nM, 1 μM, 3 μM, 5 μM, 10 μM, 20 μM, 30 μM
    Incubation Time: 24 hours
    Result: Decreased cell survival percentage for HCC193 with an IC50 of 7.2μM.
    Decreased the cell viability of H460 cells by about 60% at 30 μM.

    Western Blot Analysis[1]

    Cell Line: HCC193 cells, H460 cells
    Concentration: 0.25 μM, 0.5 μM, 1 μM, 5 μM
    Incubation Time: 1, 14, 24 hours
    Result: Reduced the expression of cIAP1 within one hour and gradually decreased XIAP with increased incubation time for both cell lines.
    Reduced the expression of cIAP1 with 0.25μM and gradually decreased XIAP with increasing concentration for both cell lines.

    ELISA Assay[1]

    Cell Line: HCC193 cells, H460 cells
    Concentration: 1 μM, 5 μM
    Incubation Time: 12 hours
    Result: Induced enhancement of the secretion of TNFα in HCC193 cells.
    Did not enhance the secretion of TNFα in H460 cells.
    体内実験

    BV6 (10 mg/kg, twice weekly for 4 weeks, i.p.) attenuated the intensity of IAPs expression[2].
    BV6 (10 mg/kg, twice weekly for 4 weeks, i.p.) reduces the total number of lesions and the percentage of Ki67-positive cells compared to the control[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Model: Female endometriosis mice modeling by estradiol valerate (HY-B0672) at the dosage 0.5 µg/mouse/week s.c injected (6 weeks of age, BALB/c)[2].
    Dosage: 10 mg/kg
    Administration: a single i.p. injection,twice weekly for 4 weeks
    Result: Attenuated the intensity of IAPs expression.
    分子量

    1205.57

    分子式

    C70H96N10O8
    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O=C(NCCCCCCNC([C@@H](NC([C@H](CCC1)N1C([C@H](C2CCCCC2)NC([C@H](C)NC)=O)=O)=O)C(C3=CC=CC=C3)C4=CC=CC=C4)=O)[C@@H](NC([C@H](CCC5)N5C([C@H](C6CCCCC6)NC([C@H](C)NC)=O)=O)=O)C(C7=CC=CC=C7)C8=CC=CC=C8
    輸送条件

    Room temperature in continental US; may vary elsewhere.
    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : ≥ 100 mg/mL (82.95 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 0.8295 mL 4.1474 mL 8.2948 mL
    5 mM 0.1659 mL 0.8295 mL 1.6590 mL
    10 mM 0.0829 mL 0.4147 mL 0.8295 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます：C1V1 = C2V2

    濃度 （開始）

    C1

    ×
    体積 （開始）

    V1

    =
    濃度 （終了）

    C2

    ×
    体積 （終了）

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (2.07 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (2.07 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    % 
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 0.8295 mL 4.1474 mL 8.2948 mL 20.7371 mL
    5 mM 0.1659 mL 0.8295 mL 1.6590 mL 4.1474 mL
    10 mM 0.0829 mL 0.4147 mL 0.8295 mL 2.0737 mL
    15 mM 0.0553 mL 0.2765 mL 0.5530 mL 1.3825 mL
    20 mM 0.0415 mL 0.2074 mL 0.4147 mL 1.0369 mL
    25 mM 0.0332 mL 0.1659 mL 0.3318 mL 0.8295 mL
    30 mM 0.0276 mL 0.1382 mL 0.2765 mL 0.6912 mL
    40 mM 0.0207 mL 0.1037 mL 0.2074 mL 0.5184 mL
    50 mM 0.0166 mL 0.0829 mL 0.1659 mL 0.4147 mL
    60 mM 0.0138 mL 0.0691 mL 0.1382 mL 0.3456 mL
    80 mM 0.0104 mL 0.0518 mL 0.1037 mL 0.2592 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    BV6 Related Classifications

    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます：C1V1 = C2V2

    濃度 （開始） × 体積 （開始） = 濃度 （終了） × 体積 （終了）
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Keywords:

    BV61001600-56-1BV 6BV-6IAPcIAP1XIAPapoptosisHCC193Inhibitorinhibitorinhibit

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

    		  

    カスタマ需要量 *

    お名前 *

    		 

    タイトル

    メールアドレス *

    		 

    電話番号 *

    デパートメント

    		 

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

    		      

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    BV6
    製品番号:
    HY-16701
    数量:
    MCE 日本正規代理店:

    カスタマーレビュー

    Thank You for Your Feedback!

    Request for HNMR Report

    Please fill out this form to request the QC report. We will send it to your Email address shortly.

    Your information is safe with us. * Required Fields.

    製品名

    		  

    Lot #

    お名前 *

    		 

    メールアドレス *

    電話番号 *

    		 

    部門 *

    組纖名 *

    		 

    国或いは地域 *

    備考

    Request for HNMR Report

    We have received your request and will respond to you as soon as possible.