2. PI3K/Akt/mTOR
  3. PIN1
  4. KPT-6566

KPT-6566 is a selective and covalent prolyl isomerase PIN1 inhibitor, covalently binds to the catalytic site of PIN1, selectively inhibits and degrades PIN1. KPT-6566 shows an IC50 value of 640 nM and a Ki value of 625.2 nM for PIN1 PPIase domain. KPT-6566 can be used for the research of cancer.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

KPT-6566

KPT-6566 構造式

CAS 番号 : 881487-77-0

容量 価格（税別） 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 396 在庫あり
Solution
10 mM * 1 mL in DMSO USD 396 在庫あり
Solid
1 mg $120 在庫あり
5 mg $360 在庫あり
10 mg $468 在庫あり
25 mg $655 在庫あり
50 mg $850 在庫あり
100 mg $1100 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 1 publication(s) in Google Scholar

KPT-6566 関連抗体

Top Publications Citing Use of Products

  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

KPT-6566 is a selective and covalent prolyl isomerase PIN1 inhibitor, covalently binds to the catalytic site of PIN1, selectively inhibits and degrades PIN1. KPT-6566 shows an IC50 value of 640 nM and a Ki value of 625.2 nM for PIN1 PPIase domain. KPT-6566 can be used for the research of cancer[1].

IC50 & Target

IC50: 640 nM (PIN1 PPIase)[1]
Ki: 625.2 nM (PIN1 PPIase)[1]
Cellular Effect
Cell Line Type Value Description References
MDA-MB-231 IC50
1.2 μM
Compound: 42
Anticancer activity against human MDA-MB-231 cells assessed as cell growth inhibition measured after 24 hrs by tryphan blue staining based assay
Anticancer activity against human MDA-MB-231 cells assessed as cell growth inhibition measured after 24 hrs by tryphan blue staining based assay
[PMID: 37438908]
体外実験

KPT-6566 (1-5 μM; 0-8 d) inhibits WT fibroblasts proliferation[1].
KPT-6566 (0-10 μM; 48 h) inhibits normal breast epithelial cells and cancer cells viability via a PIN1-dependent manner[1].
KPT-6566 (0-10 μM; 48 h) affects hyperphosphorylated pRB level, Cyclin D1 and PIN1 concentration[1].
KPT-6566 (2.5-5 μM; 48 h) inhibits the mut-p53, NOTCH1 and NRF2 pathways[1].
KPT-6566 (0-5 μM; 48 h) induces DNA damage via a PIN1-dependent way[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

KPT-6566 関連抗体

Cell Proliferation Assay[1]

Cell Line: Immortalized fibroblasts derived from WT and Pin1 KO mouse embryos
Concentration: 1 and 5 μM
Incubation Time: 0-8 days
Result: Dose-dependently inhibited proliferation of WT fibroblasts, while showed no effect on Pin1 KO fibroblasts.

Cell Viability Assay[1]

Cell Line: MCF10A, HMEC, HeLa, LNCaP, SKOV-3, PANC-1, PC-3, MDA-MB-468 and MDA-MB-231 cells
Concentration: 0-10 μM
Incubation Time: 48 hours
Result: Inhibited normal breast epithelial cells and cancer cells viability even at a low concentration and increased the concentration of PIN1 in MDA-MB-468, SKOV-3, PC-3, LNCaP and PANC-1.

Western Blot Analysis[1]

Cell Line: Immortalized fibroblasts derived from WT and Pin1 KO mouse embryos and PIN1 KO MDA-MB-231 cells
Concentration: 0-10 μM
Incubation Time: 48 hours
Result: Decreased hyperphosphorylated pRB and Cyclin D1 levels, dose- and time-dependently promoted degradation of PIN1 .

Western Blot Analysis[1]

Cell Line: MDA-MB-231, MCF10A, MDA-MB-468 and MDA-MB-231 cells
Concentration: 0, 2.5 and 5 μM
Incubation Time: 48 hours
Result: Dose-dependently increased H2AX phosphorylation and caused H2AX phosphorylation in MCF10A, MDA-MB-468 and MDA-MB-231 cell lines. Increased H2AX phosphorylation while other inhibitors such as ATRA, PiB and Juglone disabled to induce H2AX phosphorylation at same concentration. Achieved DNA damage through formation of DNA adducts.

RT-PCR[1]

Cell Line: MDA-MB-231 cells
Concentration: 2.5 and 5 μM
Incubation Time: 48 hours
Result: Dose-dependently inhibitd the activation of mut-p53 and NOTCH1 pathways which are controlled by PIN1. Inhibitd the expression of cFOS HO1, NQO1, TXNRD1 and DNAJAB, and induced cellular responses to oxidative stress.
体内実験

KPT-6566 (5 mg/kg; i.p. once a day for 26 days) shows no toxicity to mice[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: 6-week-old female mice with 1 million of MDA-MB-231Luc6 cells injection[1]
Dosage: 5 mg/kg
Administration: Intraperitoneal injection; 5 mg/kg once a day; for 26 days
Result: Exibited no sign of local or systemic and organ toxicity by post mortem morphologic analyses.
分子量

443.54

分子式

C22H21NO5S2
CAS 番号
Appearance

Solid

Color

White to yellow

SMILES

O=C(O)CSC(C1=O)=C/C(C2=C1C=CC=C2)=N\S(=O)(C3=CC=C(C(C)(C)C)C=C3)=O
輸送条件

Room temperature in continental US; may vary elsewhere.
保管条件

4°C, protect from light, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
溶剤 & 溶解度
体外: 

DMSO : 19.23 mg/mL (43.36 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.2546 mL 11.2729 mL 22.5459 mL
5 mM 0.4509 mL 2.2546 mL 4.5092 mL
10 mM 0.2255 mL 1.1273 mL 2.2546 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始）

C1

×
体積 （開始）

V1

=
濃度 （終了）

C2

×
体積 （終了）

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: 1.92 mg/mL (4.33 mM); Suspended solution; Need ultrasonic

    This protocol yields a suspended solution of 1.92 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (19.2 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 1 mg/mL (2.25 mM); Clear solution

    This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 98.0%

COA (258 KB) HNMR (258 KB)

取扱説明書 (2659 KB)
参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.2546 mL 11.2729 mL 22.5459 mL 56.3647 mL
5 mM 0.4509 mL 2.2546 mL 4.5092 mL 11.2729 mL
10 mM 0.2255 mL 1.1273 mL 2.2546 mL 5.6365 mL
15 mM 0.1503 mL 0.7515 mL 1.5031 mL 3.7576 mL
20 mM 0.1127 mL 0.5636 mL 1.1273 mL 2.8182 mL
25 mM 0.0902 mL 0.4509 mL 0.9018 mL 2.2546 mL
30 mM 0.0752 mL 0.3758 mL 0.7515 mL 1.8788 mL
40 mM 0.0564 mL 0.2818 mL 0.5636 mL 1.4091 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

KPT-6566 Related Classifications

  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始） × 体積 （開始） = 濃度 （終了） × 体積 （終了）
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

KPT-6566881487-77-0KPT6566KPT 6566PIN1peptidylprolyl cis/trans isomerase, NIMA-interacting 1breast epithelialanti- proliferationCyclin D1MDA-MB-231 cellROSDNA damageInhibitorinhibitorinhibit

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

  

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

      

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
KPT-6566
製品番号:
HY-123847
数量:
MCE 日本正規代理店:

カスタマーレビュー

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

製品名

  

Lot #

お名前 *

 

メールアドレス *

電話番号 *

 

部門 *

組纖名 *

 

国或いは地域 *

備考

Request for HNMR Report

We have received your request and will respond to you as soon as possible.