1. Membrane Transporter/Ion Channel
  2. OAT URAT1
  3. Lesinurad

Lesinurad is a URAT1 and OAT inhibitor, is determined to be a substrate for the kidney transporters OAT1 and OAT3 with Km values of 0.85 and 2 µM, respectively.

연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.

Lesinurad

Lesinurad 화학구조

CAS No. : 878672-00-5

사이즈 가격 재고 수량
무료 샘플 (0.1 - 0.2 mg)   지금 신청하기  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
해외재고보유
Solution
10 mM * 1 mL in DMSO 해외재고보유
Solid
5 mg 해외재고보유
10 mg 해외재고보유
25 mg 해외재고보유
50 mg 해외재고보유
100 mg 해외재고보유
200 mg   견적 받기  
500 mg   견적 받기  

* 장바구니에 담기 전 물품의 수량을 선택해 주십시오.

This product is a controlled substance and not for sale in your territory.

고객리뷰

Based on 5 publication(s) in Google Scholar

Other Forms of Lesinurad:

Top Publications Citing Use of Products
  • Biological Activity

  • Protocol

  • 순도&문서

  • References

  • 고객리뷰

제품 설명

Lesinurad is a URAT1 and OAT inhibitor, is determined to be a substrate for the kidney transporters OAT1 and OAT3 with Km values of 0.85 and 2 µM, respectively.

IC50 & Target

Km: 0.85 µM (OAT1), 2 µM (OAT3)[1]

Cellular Effect
Cell Line Type Value Description References
HEK293 IC50
15.1 μM
Compound: (-)-lesinurad
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
[PMID: 28337320]
HEK293 IC50
2.03 μM
Compound: 12
Inhibition of human OAT4 expressed in HEK293 cells by assessed as [14C]urate uptake preincubated for 5 mins followed by [14C]urate addition and measured after 10 mins by liquid scintillation counting method
Inhibition of human OAT4 expressed in HEK293 cells by assessed as [14C]urate uptake preincubated for 5 mins followed by [14C]urate addition and measured after 10 mins by liquid scintillation counting method
[PMID: 31774679]
HEK293 IC50
4.4 μM
Compound: (+)-lesinurad
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
[PMID: 28337320]
HEK293 IC50
7.2 μM
Compound: Lesinurad
Inhibition of human URAT1 expressed in HEK293 cells assessed as reduction in [8-14C]uric acid uptake
Inhibition of human URAT1 expressed in HEK293 cells assessed as reduction in [8-14C]uric acid uptake
[PMID: 30579795]
HEK293 IC50
7.3 μM
Compound: (+/-)-Lesinurad
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
Inhibition of human URAT1 expressed in HEK293 cells assessed as inhibition of [14C]uric acid uptake preincubated for 15 mins followed by [14C]uric acid addition measured after 10 mins by liquid scintillation counting method
[PMID: 28337320]
Vero IC50
> 64 μg/mL
Compound: Lesinurad
Cytotoxicity against african green monkey Vero cells measured after 48 hrs by MTT assay
Cytotoxicity against african green monkey Vero cells measured after 48 hrs by MTT assay
[PMID: 38547733]
In Vitro

Lesinurad is a novel selective uric acid reabsorption inhibitor (SURI). Lesinurad is determined to be a substrate for the kidney transporters organic anion transporter (OAT1) and OAT3 with Km values of 0.85 and 2 μM, respectively[1]. Lesinurad (RDEA594) is a URAT1 and OAT inhibitor, which increases proximal renal tubule urate excretion[2]. Lesinurad (RDEA594) is a potential uric acid lowering agent througn inhibition of uric acid reuptake, and exhibits favorable p450 profiles, inhibits CYP2C9 and CYP2C8 with IC50 of 14.4 μM and 16.2 μM, respectively. IC50s of Lesinurad are all above 100 μM for CYP1A2, CYP2C19,and CYP2D6[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

In Vivo

Lesinurad (RDEA594) shows better pharmacokinetics than its pro-drug RDEA806. The 100 mg dose of Lesinurad exhibits a phamacological effect in the range of that produced by 300 mg to 800 mg single doses of RDEA806[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Clinical Trial
분자량

404.28

화학식

C17H14BrN3O2S

CAS No.
Appearance

Solid

Color

White to off-white

SMILES

BrC1=NN=C(SCC(O)=O)N1C2=C3C(C=CC=C3)=C(C4CC4)C=C2

선적

Room temperature in continental US; may vary elsewhere.

보관
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
용액&용해도
In Vitro: 

DMSO : 100 mg/mL (247.35 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.4735 mL 12.3677 mL 24.7353 mL
5 mM 0.4947 mL 2.4735 mL 4.9471 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

  • 몰농도 계산기

  • 농도 희석 계산기

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (6.18 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (6.18 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서

Purity: 99.96%

References
Cell Assay 
[1]

Validated oocytes, HEK293, MDCK-II, Caco-2 or MDCK-MDR1 cell systems are used to study the interaction of Lesinurad with membrane transporters localized to the kidney (OAT1, OAT3, OCT2, MATE1, and MATE2K) or liver (P-gp, BCRP, OATP1B1, OATP1B3, and OCT1). Xenopus laevis oocytes are injected with OAT1 or OAT3 cRNA or control (water) while HEK293 cells are stably transfected with MATE1, MATE2K, or vector and MDCK-II cells with hOATP1B1, hOATP1B3, hOCT1, hOCT2, or vector. The MDCKII cell line is stably transfected with the human MDR1 gene to create a P-gp cell line. The interaction of Lesinurad with BCRP relied on the endogenous expression in Caco-2 cells. All cells are cultured with growth medium according to standard methodology. In order to determine whether Lesinurad is a substrate for a transporter, cells are incubated with [14C]-labeled Lesinurad at various concentrations and the amount of Lesinurad taken up by the cells determined by subtracting the uptake in vector cells from that in the transfected cells. The uptake of a [3H]-labeled known substrate of the transporter served as the positive control. Inhibition of a transporter by Lesinurad is determined by incubating cells with a fixed concentration of [3H]-labeled known substrate and various concentrations of unlabeled Lesinurad. Inhibition by a known inhibitor of each transporter served as the positive control. Cells are incubated for the appropriate amount of time. All reactions are terminated by the addition of ice-cold medium. The cells are then rinsed with medium and lysed[1].

MCE 는 독립적으로 이러한 방법들의 정확성을 확인하지 않았습니다. 참고용으로만 봐주십시오.

References

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.4735 mL 12.3677 mL 24.7353 mL 61.8383 mL
5 mM 0.4947 mL 2.4735 mL 4.9471 mL 12.3677 mL
10 mM 0.2474 mL 1.2368 mL 2.4735 mL 6.1838 mL
15 mM 0.1649 mL 0.8245 mL 1.6490 mL 4.1226 mL
20 mM 0.1237 mL 0.6184 mL 1.2368 mL 3.0919 mL
25 mM 0.0989 mL 0.4947 mL 0.9894 mL 2.4735 mL
30 mM 0.0825 mL 0.4123 mL 0.8245 mL 2.0613 mL
40 mM 0.0618 mL 0.3092 mL 0.6184 mL 1.5460 mL
50 mM 0.0495 mL 0.2474 mL 0.4947 mL 1.2368 mL
60 mM 0.0412 mL 0.2061 mL 0.4123 mL 1.0306 mL
80 mM 0.0309 mL 0.1546 mL 0.3092 mL 0.7730 mL
100 mM 0.0247 mL 0.1237 mL 0.2474 mL 0.6184 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

최근 본 상품:

온라인 문의

Your information is safe with us. * Required Fields.

상품명

 

Requested Quantity *

고객명 *

 

호칭

메일주소 *

 

전화번호 *

Department

 

회사명 *

City

Country or Region *

     

비고

대량구매 문의

Inquiry Information

상품명:
Lesinurad
Cat. No.:
HY-15258
수량:
MCE Japan Authorized Agent: