1. Metabolic Enzyme/Protease
  2. HIF/HIF Prolyl-Hydroxylase
  3. Molidustat

Molidustat  (Synonyms: BAY 85-3934)

製品番号: HY-12654 純度: 99.70%
COA 取扱説明書 Technical Support

Molidustat (BAY 85-3934) is an orally active inhibitor of hypoxia-inducible factor prolyl hydroxylase (HIF-PH) with IC50 values of 480 nM, 280 nM, and 450 nM for PHD1, PHD2, and PHD3, respectively. Molidustat can elevate the levels of circulating erythropoietin (EPO) to near-normal physiological ranges. Molidustat can be utilized in the research of renal anemia.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 1154028-82-6

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 132 在庫あり
Solution
10 mM * 1 mL in DMSO USD 132 在庫あり
Solid
5 mg $120 在庫あり
10 mg $180 在庫あり
25 mg $288 在庫あり
50 mg $400 在庫あり
100 mg $550 在庫あり
250 mg $880 在庫あり
500 mg $1240 在庫あり
1 g   お問い合わせ  
5 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 8 publication(s) in Google Scholar

Other Forms of Molidustat:

Top Publications Citing Use of Products

    Molidustat purchased from MedChemExpress. Usage Cited in: Drug Test Anal. 2025 May;17(5):647-654.  [Abstract]

    Beard hair chromatogram. Molidustat concentration is 55 pg/mg. From bottom to top: Transition for internal standard testosterone-d3 (292.24 > 96.99) and two transitions of molidustat (315.0 > 137.10 and 315.10 > 207.00).

    Molidustat purchased from MedChemExpress. Usage Cited in: Biochem Biophys Res Commun. 2018 Sep 3;503(1):297-303.  [Abstract]

    Effects of adaptaquin (10 mM) and Molidustat (10 mM) on Fe-8HQ (15 mM, 14 h)-induced LDH release in AML 12 cells.

    Molidustat purchased from MedChemExpress. Usage Cited in: Biochem Biophys Res Commun. 2018 Sep 3;503(1):297-303.  [Abstract]

    Morphology of HT-1080 cells treated with Fe-8HQ (10 mM, 8 h) ± adaptaquin (10 mM) or Molidustat (10 mM).

    HIF/HIF Prolyl-Hydroxylase アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Molidustat (BAY 85-3934) is an orally active inhibitor of hypoxia-inducible factor prolyl hydroxylase (HIF-PH) with IC50 values of 480 nM, 280 nM, and 450 nM for PHD1, PHD2, and PHD3, respectively. Molidustat can elevate the levels of circulating erythropoietin (EPO) to near-normal physiological ranges. Molidustat can be utilized in the research of renal anemia[1][2].

    IC50 & Target

    IC50: 480 nM (PHD1), 280 nM (PHD2), 450 nM (PHD3)[1]

    体外実験

    Molidustat (BAY 85-3934) (5 μM; 20 min) is sufficient to induce detectable levels of HIF-1α in HeLa cells. In a cell reporter assay, Molidustat induces expression of a firefly luciferase reporter gene under the control of a hypoxia response element promoter with a mean (± SD) EC50 of 8.4 μM (n=4)[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    体内実験

    Molidustat (BAY 85-3934) , by stabilizing the hypoxia-inducible factor (HIF), leads to a dose-dependent increase in erythropoietin (EPO) in both Wistar rats (0.5-5 mg/kg; oral; once daily for 26 days) and cynomolgus monkeys (0.5-1.5mg/kg; once daily for 5 days)[1].
    Molidustat (0.5-10 mg/kg; orally; five times weekly) can normalize the blood pressure in rat models of chronic kidney disease (CKD) and effectively alleviate renal anemia in rats with impaired renal function[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    臨床実験
    分子量

    314.30

    分子式

    C13H14N8O2

    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O=C1C(N2N=NC=C2)=CNN1C3=NC=NC(N4CCOCC4)=C3

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 5 mg/mL (15.91 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 3.1817 mL 15.9084 mL 31.8167 mL
    5 mM 0.6363 mL 3.1817 mL 6.3633 mL
    10 mM 0.3182 mL 1.5908 mL 3.1817 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 0.5 mg/mL (1.59 mM); Clear solution

      This protocol yields a clear solution of ≥ 0.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 0.5 mg/mL (1.59 mM); Clear solution

      This protocol yields a clear solution of ≥ 0.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  0.5% CMC-Na/saline water

      Solubility: 10 mg/mL (31.82 mM); Suspended solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.70%

    参考文献
    動物実験
    [1]

    Rats: BAY 85-3934 is prepared as a solution in ethanol:Solutol HS 15:water (10:20:70). In a repeat-dose, 26-day experiment, male Wistar rats (240–340 g in body weight) are administered vehicle or BAY 85-3934 at doses of 0.5 mg/kg, 1.25 mg/kg, 2.5 mg/kg, and 5 mg/kg. The efficacy of BAY 85-3934 (2.5 mg/kg, once-daily, oral) is also compared with that of rhEPO (25 IU/kg, 50 IU/kg, and 100 IU/kg, twice-weekly, s.c. injection). The time-course of induction of EPO mRNA expression and plasma EPO is determined at baseline and 0.5 h, 1 h, 2 h, 4 h, 6 h, and 8 h after oral administration of a single dose of BAY 85-3934 (5 mg/kg)[1].

    Monkey: BAY 85-3934 is prepared as a solution in 0.5% tylose. Male and female cynomolgus monkeys (2.8–5.6 kg in body weight) are administered at doses of 0.5 mg/kg and 1.5 mg/kg at 0 h, 24 h, 48 h, 72 h, and 96 h. Blood samples are taken at 7 h, 31 h, 55 h, 79 h, 103 h, and 168 h. Erythropoietic parameters are also evaluated after a 2-week treatment period with s.c. administration of rhEPO (100 IU/kg twice weekly at days 1, 4, 8, and 11) and BAY 85-3934 (1.5 mg/kg) once daily[1].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 3.1817 mL 15.9084 mL 31.8167 mL 79.5418 mL
    5 mM 0.6363 mL 3.1817 mL 6.3633 mL 15.9084 mL
    10 mM 0.3182 mL 1.5908 mL 3.1817 mL 7.9542 mL
    15 mM 0.2121 mL 1.0606 mL 2.1211 mL 5.3028 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Molidustat
    製品番号:
    HY-12654
    数量:
    MCE 日本正規代理店: