2. MAPK/ERK Pathway Autophagy
  3. MEK Autophagy
  4. Binimetinib

Binimetinib  (Synonyms: MEK162; ARRY-162; ARRY-438162)

製品番号: HY-15202 純度: 99.50%
COA 取扱説明書

Molarity Calculator

Binimetinib (MEK162) is an oral and selective MEK1/2 inhibitor. Binimetinib (MEK162) inhibits MEK with an IC50 of 12 nM.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Binimetinib 構造式

Binimetinib 構造式

CAS 番号 : 606143-89-9

容量 価格（税別） 在庫状況 数量
無料サンプル (0.1 - 0.5 mg)   今すぐ申し込む  
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 79 在庫あり
Solution
10 mM * 1 mL in DMSO USD 79 在庫あり
Solid
5 mg USD 46 在庫あり
10 mg USD 72 在庫あり
50 mg USD 100 在庫あり
100 mg USD 120 在庫あり
200 mg USD 190 在庫あり
500 mg   お問い合わせ  
1 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 26 publication(s) in Google Scholar

Binimetinib 関連抗体

Top Publications Citing Use of Products

    Binimetinib purchased from MedChemExpress. Usage Cited in: Oncotarget. 2017 Feb 28;8(9):14835-14846.  [Abstract]

    MEK inhibition results in reduced ERK phosphorylation.A. Western blot analysis of SEM and KOPN8 exposed to 500 nM of MEK inhibitor or vehicle control (DMSO) for 6, 24 and 48 hours. Both cell lines almost completely lose ERK phosphorylation (p-ERK), while total ERK (t-ERK) levels remain unaffected. B. Analysis of MEK phosphorylation (p-MEK) suggests exposure to MEK162 and Selumetinib results in enhanced MEK phosphorylation in both cell lines, whereas total MEK (t-MEK) levels remain constant.

    Binimetinib purchased from MedChemExpress. Usage Cited in: Oncotarget. 2017 May 30;8(47):82027-82036.  [Abstract]

    U0126 and MEK162 block ERK activation (p-ERK1/2) in CZ415-treated U2OS cells.

    Binimetinib purchased from MedChemExpress. Usage Cited in: Oncogene. 2016 Jun 9;35(23):2961-70.  [Abstract]

    The combined use of MEK162 with HER kinase inhibitor GW572016, almost completely abolishes MAPK signaling as evidenced by diminished phospho-Erk levels. Western blot analyses of ERK signaling in tumor transplants from mice treated as indicated. Three hours after their dose on day four of treatment, the mice are sacrificed for analysis. Vinculin is used as a loading control.

    MEK アイソフォーム固有の製品をすべて表示:

    すべてのアイソフォームを表示
    MEK1 MEK2 MEK5 MEK

    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Binimetinib (MEK162) is an oral and selective MEK1/2 inhibitor. Binimetinib (MEK162) inhibits MEK with an IC50 of 12 nM.

    IC50 & Target[1]

    MEK

    12 nM (IC50)

    Autophagy

     

    体外実験

    In MCF7 cells, RSK3 or RSK4 expression decreases response to treatment with any of the PI3K inhibitors alone. However, the combination of PI3K inhibition with Binimetinib (MEK162) or BI-D1870 completely reverses the resistance of RSK-expressing cells[2]. Binimetinib (MEK162) blocks basal ERK phosphorylation in all HRAS mutant cell lines. The combination of RAD001 and AZD6244/MEK162 causes a stronger inhibition of S6 kinase than single use of RAD001 on Western blot. The combination of RAD001 and AZD6244/MEK162 also translated in a stronger blockade of cell growth in HRAS mutant cells than single use. Binimetinib (MEK162) shows stronger synergism with RAD001 than AZD6244[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Binimetinib 関連抗体
    体内実験

    Treatment with Binimetinib (ARRY-438162) reduces disease severity in a dose-related manner in both animal models. ARRY-438162 in the CIA model inhibits increases in ankle diameter by 27% and 50% at 1 and 3 mg/kg, while Ibuprofen has 46% inhibition. When combined with Ibuprofen, these same two doses result in 74% and 72% inhibition, respectively. Microscopic examination of the ankle joints show Binimetinib (ARRY-438162) significantly inhibits lesions (inflammation, cartilage damage, pannus formation and bone resorption) by 32% and 60% at 1 and 3 mg/kg, while treatment with Ibuprofen alone results in 17% inhibition, which is not significantly different from the controls. When these two doses of Binimetinib (ARRY-438162) are combined with ibuprofen, the result is 54% and 77% inhibition of joint destruction. In AIA, 3 and 10 mg/kg of Binimetinib (ARRY-438162) inhibit AIA ankle diameter 11% and 34%, while MTX has 33% inhibition. When combined with MTX, 3 and 10 mg/kg of Binimetinib (ARRY-438162) result in 55% and 71% inhibition. Microscopic examination of ankle joints for inflammation and bone resorption also shows improved efficacy versus either compound alone[1]. When Binimetinib (MEK162) is combined with BEZ235, a significant reduction of tumor growth is observed (P=0.01). This increase in antitumor activity is accompanied by a decrease in phospho-ERK and phospho-S6 staining. No significant changes are observed in phospho-4EBP1 staining, a direct target of mTOR activity[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
    臨床実験
    分子量

    441.23

    分子式

    C17H15BrF2N4O3
    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    BrC1=CC=C(C(F)=C1)NC2=C(C3=C(C=C2C(NOCCO)=O)N(C=N3)C)F
    輸送条件

    Room temperature in continental US; may vary elsewhere.
    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 50 mg/mL (113.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.2664 mL 11.3320 mL 22.6639 mL
    5 mM 0.4533 mL 2.2664 mL 4.5328 mL
    10 mM 0.2266 mL 1.1332 mL 2.2664 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.67 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (5.67 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  1% CMC  0.5% Tween-80

      Solubility: 10 mg/mL (22.66 mM); Suspended solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    % 
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.50%

    COA (251 KB) HNMR (300 KB) LCMS (269 KB)

    取扱説明書 (2659 KB)
    参考文献
    細胞実験
    [2]

    MCF7 cells infected as indicated are seeded in 12-well plates (2×104). After 24 hours, cells are treated with BEZ235 (100 or 200 nM), BKM120 (0.75 or 1 μM), GDC-0941 (1 μM), or MK2206 (2 μM) alone or in combination with Binimetinib (MEK162) (1 μM), BI-D1870 (10 μM), or AZD6244 (1 μM), as indicated in text. Cell numbers are quantified by fixing cells with 4% glutaraldehyde or methanol, washing the cells twice in H2O, and staining the cells with 0.1% crystal violet. The dye is subsequently extracted with 10% acetic acid, and its absorbance is determined (570 nm). Growth curves are performed in triplicate. Viability assays with CellTiter-Glo are performed by plating 2,000 cells in 96-well plates, adding the drug at 24 hours, and assaying 4 to 5 days after drug addition. Cell-cycle and hypodiploid apoptotic cells are quantified by flow cytometry. Briefly, cells are washed with PBS, fixed in cold 70% ethanol, and then stained with propidium iodide while being treated with RNase. Quantitative analysis of sub-G1 cells is carried out in a FACScalibur cytometer using Cell Quest software[2].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
    動物実験
    [1][2]

    Mice[2]
    Six-week-old female athymic nude Foxn1nu mice are used. Mice are treated once daily with placebo, BEZ235, BKM120, MK-2206, or Binimetinib (MEK162) by oral gavage. BEZ235 (25-30 mg/kg, 6IW [6 days on 1 day off]) and BKM120 (30 mg/kg, 6IW) are dissolved in 10% NMP-90% PEG, freshly formulated, and administrated within 30 minutes. MK-2206 (100 mg/kg, 3IW) is formulated in 30% Captisol and Binimetinib (MEK162) (6 mg/kg, BID) in 0.5% Tween-80, 1% carboxymethyl cellulose. For tumor growth studies, mice are treated for 7-24 days, depending on the xenograft model and treatment regime. Tumor xenografts are measured with calipers 3 times a week, and tumor volume is determined using the following formula: (length×width2)×(π/6). At the end of the experiment, the animals are anesthetized with 1.5% isofluorane-air mixture and killed by cervical dislocation. Tumors are removed 2 hours following the last administration.
    Rats[1]
    Rat collagen-induced arthritis (CIA) and rat adjuvant-induced arthritis (AIA) models are used to determine efficacy in the subacute inflammation setting. In the CIA studies, rats with established disease, induced by injections of Type II collagen, are treated with 0.3, 1 or 3 mg/kg ARRY-438162 (PO, BID) with or without 30 mg/kg ibuprofen (PO, QD) for six days. Body weight and ankle diameter are used to monitor disease progression on days 0-7. The AIA model is induced by an injection of a lipoidal amine in FCA on day 0. The AIA rats are treated with 1, 3 or 10 mg/kg Binimetinib (ARRY-438162) (PO, QD) beginning on day 8 and continuing for 6 days, with or without the addition of 0.05 mg/kg CL14377 (PO, QD) which is dosed days 0-13. Disease progression is monitored on days 7-14 measuring both paw diameter and body weight.

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.2664 mL 11.3320 mL 22.6639 mL 56.6598 mL
    5 mM 0.4533 mL 2.2664 mL 4.5328 mL 11.3320 mL
    10 mM 0.2266 mL 1.1332 mL 2.2664 mL 5.6660 mL
    15 mM 0.1511 mL 0.7555 mL 1.5109 mL 3.7773 mL
    20 mM 0.1133 mL 0.5666 mL 1.1332 mL 2.8330 mL
    25 mM 0.0907 mL 0.4533 mL 0.9066 mL 2.2664 mL
    30 mM 0.0755 mL 0.3777 mL 0.7555 mL 1.8887 mL
    40 mM 0.0567 mL 0.2833 mL 0.5666 mL 1.4165 mL
    50 mM 0.0453 mL 0.2266 mL 0.4533 mL 1.1332 mL
    60 mM 0.0378 mL 0.1889 mL 0.3777 mL 0.9443 mL
    80 mM 0.0283 mL 0.1416 mL 0.2833 mL 0.7082 mL
    100 mM 0.0227 mL 0.1133 mL 0.2266 mL 0.5666 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    Binimetinib Related Classifications

    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Keywords:

    Binimetinib606143-89-9MEK162 ARRY-162 ARRY-438162MEK 162MEK-162ARRY162ARRY 162ARRY-162ARRY438162ARRY 438162ARRY-438162MEKAutophagyMitogen-activated protein kinase kinaseMAPKKMAP2KInhibitorinhibitorinhibit

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

    		  

    タイトル

    お名前 *

    		 

    PC 用メールアドレス *

    電話番号 *

    		 

    勤務先/学校名 *

    Department *

    		 

    カスタマ需要量 *

    国会或いは地域 *

    		      

    必ず会社名を記載ください。個人への返信は行いません。

    メッセージ

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Binimetinib
    製品番号:
    HY-15202
    数量:
    MCE 日本正規代理店:

    カスタマーレビュー

    Thank You for Your Feedback!

    Request for HNMR Report

    Please fill out this form to request the QC report. We will send it to your Email address shortly.

    Your information is safe with us. * Required Fields.

    製品名

    		  

    Lot #

    お名前 *

    		 

    PC 用メールアドレス *

    電話番号 *

    		 

    部門 *

    勤務先/学校名 *

    		 

    国会或いは地域 *

    メッセージ

    Request for HNMR Report

    We have received your request and will respond to you as soon as possible.