1. Protein Tyrosine Kinase/RTK
    JAK/STAT Signaling
    Stem Cell/Wnt
  2. FLT3
  3. Pacritinib

Pacritinib (Synonyms: SB1518)

製品番号: HY-16379 純度: 99.93%

Pacritinib is a potent inhibitor of both wild-type JAK2 (IC50=23 nM) and JAK2V617F mutant (IC50=19 nM). Pacritinib also inhibits FLT3 (IC50=22 nM) and its mutant FLT3D835Y (IC50=6 nM).


Pacritinib 構造式

Pacritinib 構造式

CAS 番号 : 937272-79-2

容量 価格(税別) 在庫状況 数量
無料サンプル (0.5-1 mg)   今すぐ申し込む  
10 mM * 1  mL in DMSO USD 77 在庫あり
Estimated Time of Arrival: December 31
5 mg USD 70 在庫あり
Estimated Time of Arrival: December 31
10 mg USD 110 在庫あり
Estimated Time of Arrival: December 31
50 mg USD 290 在庫あり
Estimated Time of Arrival: December 31
100 mg USD 490 在庫あり
Estimated Time of Arrival: December 31
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください


Based on 7 publication(s) in Google Scholar

Top Publications Citing Use of Products

    Pacritinib purchased from MCE. Usage Cited in: Nat Med. 2017 Nov;23(11):1319-1330.

    Pacritinib effectively disrupts the S100A7/8/9–IRAK1 feedback loop to inhibit tumorsphere growth. Representative western blot (n=2) showing inhibition of phosphorylated IRAK1 and phosphorylated JAK2 (pJAK2) within 6 h of Pacritinib treatment in MB468 and MB231 cells. Actin is used as a loading control.

    JAK アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー


    Pacritinib is a potent inhibitor of both wild-type JAK2 (IC50=23 nM) and JAK2V617F mutant (IC50=19 nM). Pacritinib also inhibits FLT3 (IC50=22 nM) and its mutant FLT3D835Y (IC50=6 nM).

    IC50 & Target[1]


    19 nM (IC50)


    23 nM (IC50)


    50 nM (IC50)


    520 nM (IC50)


    1280 nM (IC50)


    6 nM (IC50)


    22 nM (IC50)


    Relative to JAK2, Pacritinib (SB1518) is two-fold less potent against TYK2 (IC50=50 nM), 23-fold less potent against JAK3 (IC50=520 nM) and 56-fold less potent against JAK1 (IC50=1280 nM). The rest of the evaluated kinases show <30% inhibition when tested against 100 nM Pacritinib at adenosine triphosphate concentrations equivalent to its Michaelis constant (Km). Pacritinib inhibits MV4-11 and MOLM-13 cells (both of which are cell lines derived from human acute myeloid leukemias driven by an FLT3 ITD mutation) with IC50 of 47 and 67 nM, respectively. Pacritinib inhibits Karpas 1106P and Ba/F3-JAK2V617F cells (which are cell lines dependent on JAK2 signaling) with IC50 of 348 and 160 nM, respectively[1]. FLT3-ITD harboring MV4-11 cells are treated for 3 h with different concentrations of Pacritinib (SB1518) and pFLT3, pSTAT5 and pERK1/2 levels are quantified. Pacritinib leads to a dose-dependent decrease of pFLT3, pSTAT5, pERK1/2 and pAkt with IC50 of 80, 40, 33 and 29 nM, respectively. The IC50 on auto-phosphorylation of FLT3-wt in RS4;11 is four-fold higher (IC50=600 nM) compare with FLT3-ITD in MV4-11 and MOLM-13 cells. However, STAT5 inhibition is detected at much lower concentrations of Pacritinib (IC50=8 nM)[2].


    For evaluation of efficacy in the Ba/F3-JAK2V617F engraftment model, mice are treated with Pacritinib (SB1518) at doses of 50 or 150 mg/kg p.o. q.d. for 13 days, with drug dosing starting 4 days after cell inoculation. At study termination, the vehicle control mice exhibit splenomegaly and hepatomegaly (~7- and 1.3-fold, respectively), reminiscent of the symptoms found in patients with symptomatic myelofibrosis. SB1518 treatment at 150 mg/kg p.o. q.d. significantly ameliorates all these symptoms, with 60% (±9%) normalization of spleen weight and 92% (±5%) normalization of liver weight and is well tolerated without significant weight loss or any hematological toxicities, including thrombocytopenia and anemia[1]. In rats, Pacritinib (SB1518) shows moderately fast absorption (tmax=4 h), with a peak concentration of 114 ng/mL, AUC of 599 ng•h/mL, and a terminal half-life of ~6 h following a single oral dose of 10 mg/kg. In dogs, Pacritinib (SB1518) is rapidly absorbed (tmax=2.0 h), with a peak concentration of ~12 ng/mL, AUC of 53 ng•h/mL, and a terminal half-life of 3.4 h following a single oral dose of 3 mg/kg[3].





    CAS 番号





    Room temperature in continental US; may vary elsewhere.

    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度

    DMSO : 5 mg/mL (10.58 mM; Need ultrasonic)

    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.1160 mL 10.5802 mL 21.1604 mL
    5 mM 0.4232 mL 2.1160 mL 4.2321 mL
    10 mM 0.2116 mL 1.0580 mL 2.1160 mL
    *Please refer to the solubility information to select the appropriate solvent.

    All assays are carried out in 384-well white microtiter plates. Compounds (e.g., Pacritinib) are 4-fold serially diluted in 8 steps, starting from 10 µM. The reaction mixture consist of 25 µL assay buffer (50 mM HEPES pH 7.5, 10 mM MgCl2, 5 mM MnCl2, 1 mM DTT, 0.1 mM Na3VO4, 5 mM β-glycerol phosphate). For FLT3 assays, the reaction contain 2.0 µg/mL FLT3 enzyme, 5 µM of poly(Glu,Tyr) substrate and 4 µM of ATP. For JAK1 assays, the reaction contain 2.5 µg/mL of JAK1 enzyme, 10 µM of poly(Glu,Ala,Tyr) substrate and 1.0 µM of ATP. For JAK2 assays, the reaction contain 0.35 µg/mL of JAK2 enzyme, 10 µM of poly (Glu,Ala,Tyr) substrate and 0.15 µM of ATP. For JAK3 assays, the reaction contain 3.5 µg/mL of JAK3 enzyme, 10 µM of poly (Glu,Ala,Tyr) substrate and 6.0 µM of ATP. For TYK2 assays, the reaction contain 2.5 µg/mL of TYK2 enzyme, 10 µM of poly (Glu,Ala,Tyr) substrate and 0.15 µM of ATP. The reaction is incubated at room temperature for 2 h prior to addition of 13 µL PKLight detection reagent. After 10 min incubation luminescent signals are read on a multi-label plate reader[1].

    MCE はこれらの方法の精度を確認していません。 こちらは参照専用です。


    SET-2 and Karpas 1106P cells, and Ba/F3-JAK2V617F-GFP-Luc cells are used. For proliferation assays in 96-well plates, cells are seeded at 30-50% confluency and are treated the following day with compounds (e.g., Pacritinib) (in triplicate) at concentrations up to 10 μM for 48 h. Cell viability is monitored using the CellTiter-Glo assay. Dose-response curves are plotted to determine IC50 values for the compounds using the XL-fit software[1].

    MCE はこれらの方法の精度を確認していません。 こちらは参照専用です。


    Female athymic BALB/c nude mice (BALB/cOlaHsd-Foxn1nu) of age 12 weeks are used; and female SCID Beige mice (CB17.Cg-PrkdcscidLystbg/Crl) of age 9-10 weeks are used. For the SET-2 leukemia model, 5×106 tumor cells are injected subcutaneously in the right flank of severe combined immunodeficient beige mice. The cells are resuspended in 50 μL serum-free growth medium, mixed 1:1 with Matrigel and injected in a total volume of 100 μL. Tumor volumes are determined by caliper measurements and drug treatment is initiated after 31 days when tumors have reached a mean volume of 280 mm3 (tumor volume (mm3)=(w2×l)/2). This study is performed using 12 mice per group and animals are killed 3 h post-dose on day 18. Tumor growth inhibition is calculated. For the efficacy studies, mice are treated by oral gavage (10 mL/kg body weight) with doses from 50 to 150 mg/kg SB1518.
    Rats and Dogs[3]
    Male Wistar rats (aged 6-8 weeks, weighing 270 to 325 g) and male Beagle dogs (6 to 7 months of age, weighing 9-11 kg) are used in this study. The oral doses for dogs and rats are 3, and 10 mg/kg, respectively. The doses are administered, by gavage, as suspensions (0.5 % methylcellulose and 0.1%tween 80) to rats, and as gelatin capsules to dogs. Following oral dosing, serial blood samples are collected (jugular vein in dogs, and superior vena cava in rats) at different time points (0 to 24 h) in tubes containing K3EDTA as anticoagulant, and centrifuged, the plasma is separated and stored at -70°C until analysis. Plasma samples are processed and analyzed by LC/MS/MS. Pharmacokinetic parameters are estimated by noncompartmental methods using WinNonlin.

    MCE はこれらの方法の精度を確認していません。 こちらは参照専用です。


    純度: 99.93%

    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • モル濃度カルキュレーター

    • 希釈カルキュレーター

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2


    PacritinibSB1518SB 1518SB-1518FLT3JAKCluster of differentiation antigen 135CD135Fms like tyrosine kinase 3Janus kinaseInhibitorinhibitorinhibit



    Your information is safe with us. * Required Fields.




    お名前 *


    PC 用メールアドレス *

    電話番号 *


    勤務先/学校名 *

    Department *


    カスタマ需要量 *

    国会或いは地域 *





    Inquiry Information

    MCE 日本正規代理店: