1. Metabolic Enzyme/Protease
  2. Phospholipase
  3. BAPTA

BAPTA is a selective and cell-impermeant chelator for calcium. BAPTA has high selectivity against magnesium and calcium. BAPTA can also inhibit phospholipase C activity independently of their role as Ca2+ chelators.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 85233-19-8

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 66 在庫あり
Solution
10 mM * 1 mL in DMSO USD 66 在庫あり
Solid
100 mg $60 在庫あり
200 mg $72 在庫あり
500 mg $108 在庫あり
1 g   お問い合わせ  
5 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 36 publication(s) in Google Scholar

Other Forms of BAPTA:

Top Publications Citing Use of Products

顧客検証

WB
RT-PCR
ELISA
IF

    BAPTA purchased from MedChemExpress. Usage Cited in: J Neuroinflammation. 2025 Aug 28;22(1):208.  [Abstract]

    BAPTA (10 μM). WB results showed that BAPTA could attenuate the Hb-induced decrease in LAMP1 and m-CTSD/pro-CTSD.

    BAPTA purchased from MedChemExpress. Usage Cited in: J Neuroinflammation. 2025 Aug 28;22(1):208.  [Abstract]

    IF results showed that BAPTA (10 μM) can partially increase the co-localization coefficients of LAMP1 and CTSD.

    BAPTA purchased from MedChemExpress. Usage Cited in: Mil Med Res. 2023 Nov 25;10(1):56.  [Abstract]

    BAPTA (10 μmol/L, 24 h). qRT-PCR was used to assess the mRNA level of Il6, Tnfα and Tgfβ3 in HMs.

    BAPTA purchased from MedChemExpress. Usage Cited in: Mil Med Res. 2023 Nov 25;10(1):56.  [Abstract]

    BAPTA (10 μmol/L, 24 h). TGF-β1 and IL-6 level in the supernatant of HMs were detected by ELISA.

    BAPTA purchased from MedChemExpress. Usage Cited in: Mil Med Res. 2023 Nov 25;10(1):56.  [Abstract]

    BAPTA (10 μmol/L, 24 h). The expression and location of TNF-α in HMs was assessed by confocal microscopy (c). Scale bar = 20 μm.

    Phospholipase アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    BAPTA is a selective and cell-impermeant chelator for calcium. BAPTA has high selectivity against magnesium and calcium. BAPTA can also inhibit phospholipase C activity independently of their role as Ca2+ chelators[1][2][3].

    IC50 & Target

    Calcium[1]

    体外実験

    BAPTA is widely used as an intracellular buffer to investigate the effects caused by Ca2+ release from intracellular calcium stores or Ca2+ influx via Ca2+-permeable channels in the plasma membrane[1].
    BAPTA can be introduced into cells via methods such as patch-clamp and microinjection[1].
    BAPTA inhibits PLC activity in isolated Drosophila melanogaster photoreceptor cells with an IC50 of approximately 8 mM[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    476.43

    分子式

    C22H24N2O10

    CAS 番号
    Appearance

    Solid

    Color

    Off-white to light brown

    SMILES

    O=C(O)CN(C1=CC=CC=C1OCCOC2=CC=CC=C2N(CC(O)=O)CC(O)=O)CC(O)=O

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    1M NaOH : 33.33 mg/mL (69.96 mM; ultrasonic and adjust pH to 11 with NaOH)

    DMSO : 15.62 mg/mL (32.79 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.0989 mL 10.4947 mL 20.9894 mL
    5 mM 0.4198 mL 2.0989 mL 4.1979 mL
    10 mM 0.2099 mL 1.0495 mL 2.0989 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 1.56 mg/mL (3.27 mM); Clear solution

      This protocol yields a clear solution of ≥ 1.56 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (15.6 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 1.56 mg/mL (3.27 mM); Clear solution

      This protocol yields a clear solution of ≥ 1.56 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (15.6 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 98.10%

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO / 1M NaOH 1 mM 2.0989 mL 10.4947 mL 20.9894 mL 52.4736 mL
    5 mM 0.4198 mL 2.0989 mL 4.1979 mL 10.4947 mL
    10 mM 0.2099 mL 1.0495 mL 2.0989 mL 5.2474 mL
    15 mM 0.1399 mL 0.6996 mL 1.3993 mL 3.4982 mL
    20 mM 0.1049 mL 0.5247 mL 1.0495 mL 2.6237 mL
    25 mM 0.0840 mL 0.4198 mL 0.8396 mL 2.0989 mL
    30 mM 0.0700 mL 0.3498 mL 0.6996 mL 1.7491 mL
    1M NaOH 40 mM 0.0525 mL 0.2624 mL 0.5247 mL 1.3118 mL
    50 mM 0.0420 mL 0.2099 mL 0.4198 mL 1.0495 mL
    60 mM 0.0350 mL 0.1749 mL 0.3498 mL 0.8746 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    BAPTA
    製品番号:
    HY-100168
    数量:
    MCE 日本正規代理店: