1. Epigenetics
  2. Histone Methyltransferase
  3. EPZ031686

EPZ031686 is an potent and orally active SMYD3 inhibitor and with an IC50 value of 3 nM. EPZ031686 can be used for cancer research.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 2095161-11-6

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 416 在庫あり
Solution
10 mM * 1 mL in DMSO USD 416 在庫あり
Solid
1 mg $140 在庫あり
5 mg $320 在庫あり
10 mg $490 在庫あり
50 mg $1450 在庫あり
100 mg $2150 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 6 publication(s) in Google Scholar

Top Publications Citing Use of Products

    EPZ031686 purchased from MedChemExpress. Usage Cited in: Aging. 2020 Nov 3;12(21):21423-21445.  [Abstract]

    EPZ031686 (20 μM) reverses Ang II-induced PARP16 and RAECs senescence. Inhibition of Smyd3 could downregulate protein level of PARP16, together with reduced ER stress and senescence markers.
    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    EPZ031686 is an potent and orally active SMYD3 inhibitor and with an IC50 value of 3 nM. EPZ031686 can be used for cancer research[1].

    IC50 & Target[1]

    SMYD3

    3 nM (IC50)

    Cellular Effect
    Cell Line Type Value Description References
    HEK-293T IC50
    36 1
    Compound: EPZ031686
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    [PMID: 26985287]
    HEK-293T IC50
    36 1
    Compound: EPZ031686
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    [PMID: 26985287]
    HEK-293T IC50
    36 1
    Compound: EPZ031686
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    Inhibition of human SMYD3 expressed in HEK293T/17 cells using FLAG-tagged MEKK2 as substrate incubated for 30 mins in low air flow area followed by incubation for 24 hrs at 37 degC by Western blot analysis
    [PMID: 26985287]
    体内実験

    EPZ031686 (1-50 mg/mL; p.o. and i.v.; Male CD-1 mice) has good bioavailability following oral dosing in mice[1].

    Pharmacokinetic Analysis in Male CD-1 mice[1]

    Route Dose (mg/kg) CL (mL/min/kg) CLr (mL/min/kg) Vss (L/kg) tmax (h) tmax (h) Cmax (ng/mL) AUClast (ng·h/mL) AUCINF_obs (ng·h/mL)
    i.v. 1 27 5.3 2.3 1.7 / / 603 616
    p.o. 5 / / / 2.7/td> 0.89 345 1281 1479
    p.o. 50 / / / 2.2 1.3 4693 21158 21170

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    591.09

    分子式

    C26H34ClF3N4O4S

    CAS 番号
    Appearance

    Solid

    Color

    White to light yellow

    SMILES

    O=C(C1)NC2=C1C=C(C(N[C@@H]3C[C@H]4N(S(CC5CCN(CCCC(F)(F)F)CC5)(=O)=O)[C@H](CC4)C3)=O)C(Cl)=C2

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 35 mg/mL (59.21 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.6918 mL 8.4589 mL 16.9179 mL
    5 mM 0.3384 mL 1.6918 mL 3.3836 mL
    10 mM 0.1692 mL 0.8459 mL 1.6918 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  30% PEG300  70% (20% SBE-β-CD in Saline)

      Solubility: 10 mg/mL (16.92 mM); Suspended solution; Need ultrasonic and warming

    • Protocol 2

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 1.75 mg/mL (2.96 mM); Clear solution

      This protocol yields a clear solution of ≥ 1.75 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (17.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.71%

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 1.6918 mL 8.4589 mL 16.9179 mL 42.2947 mL
    5 mM 0.3384 mL 1.6918 mL 3.3836 mL 8.4589 mL
    10 mM 0.1692 mL 0.8459 mL 1.6918 mL 4.2295 mL
    15 mM 0.1128 mL 0.5639 mL 1.1279 mL 2.8196 mL
    20 mM 0.0846 mL 0.4229 mL 0.8459 mL 2.1147 mL
    25 mM 0.0677 mL 0.3384 mL 0.6767 mL 1.6918 mL
    30 mM 0.0564 mL 0.2820 mL 0.5639 mL 1.4098 mL
    40 mM 0.0423 mL 0.2115 mL 0.4229 mL 1.0574 mL
    50 mM 0.0338 mL 0.1692 mL 0.3384 mL 0.8459 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    EPZ031686
    製品番号:
    HY-19324
    数量:
    MCE 日本正規代理店: