1. Metabolic Enzyme/Protease Apoptosis MAPK/ERK Pathway GPCR/G Protein
  2. Farnesyl Transferase Apoptosis Ras
  3. FTI-277 hydrochloride

FTI-277 hydrochloride is an inhibitor of farnesyl transferase (FTase); a highly potent Ras CAAX peptidomimetic which antagonizes both H- and K-Ras oncogenic signaling. FTI-277 hydrochloride can inhibit hepatitis delta virus (HDV) infection.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 180977-34-8

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 132 在庫あり
Solution
10 mM * 1 mL in DMSO USD 132 在庫あり
Solid
1 mg $62 在庫あり
5 mg $124 在庫あり
25 mg $420 在庫あり
50 mg $670 在庫あり
100 mg $950 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 7 publication(s) in Google Scholar

Other Forms of FTI-277 hydrochloride:

Top Publications Citing Use of Products

    FTI-277 hydrochloride purchased from MedChemExpress. Usage Cited in: Oncotarget. 2017 Nov 22;8(65):109135-109150.  [Abstract]

    MCF-7 cells are pretreated with the indicated chemical inhibitors for 30min, followed by 15 min treatment with RA (20 μM) + EPA (80 μM).Cell extracts are prepared and subjected to western blotting analysis.

    Ras アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    FTI-277 hydrochloride is an inhibitor of farnesyl transferase (FTase); a highly potent Ras CAAX peptidomimetic which antagonizes both H- and K-Ras oncogenic signaling. FTI-277 hydrochloride can inhibit hepatitis delta virus (HDV) infection.

    体外実験

    Treatment with FTI-277 (20 microM) for 48 h prior to irradiation led to a significant decrease in survival of radioresistant cells expressing the 24-kDa isoform (HeLa 3A) but had no effect on the survival of control cells (HeLa PINA). The radiosensitizing effect of FTI-277 is accompanied by a stimulation of postmitotic cell death in HeLa 3A cells and by a reduction in G(2)/M-phase arrest in both cell types [1]. Treatment of PC-3 cells with GGTI-298 and FTI-277 inhibited migration and invasion in a time- and dose-dependent manner [3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    体内実験

    FTI-277 treatment prevented increased PTP-1B and PTEN protein expression in burned mice as compared with vehicle alone. In contrast, FTI-277 did not significantly alter protein expression of PTP-1B and PTEN in sham-burned mice [2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    484.07

    分子式

    C22H30ClN3O3S2

    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    CSCC[C@@H](C(OC)=O)NC(C1=CC=C(NC[C@@H](N)CS)C=C1C2=CC=CC=C2)=O.[H]Cl

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件

    4°C, sealed storage, away from moisture

    *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

    溶剤 & 溶解度
    体外: 

    DMSO : 100 mg/mL (206.58 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    H2O : 100 mg/mL (206.58 mM; Need ultrasonic)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.0658 mL 10.3291 mL 20.6582 mL
    5 mM 0.4132 mL 2.0658 mL 4.1316 mL
    10 mM 0.2066 mL 1.0329 mL 2.0658 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.16 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (5.16 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  PBS

      Solubility: 33.33 mg/mL (68.85 mM); Clear solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
    純度とドキュメンテーション
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO / H2O 1 mM 2.0658 mL 10.3291 mL 20.6582 mL 51.6454 mL
    5 mM 0.4132 mL 2.0658 mL 4.1316 mL 10.3291 mL
    10 mM 0.2066 mL 1.0329 mL 2.0658 mL 5.1645 mL
    15 mM 0.1377 mL 0.6886 mL 1.3772 mL 3.4430 mL
    20 mM 0.1033 mL 0.5165 mL 1.0329 mL 2.5823 mL
    25 mM 0.0826 mL 0.4132 mL 0.8263 mL 2.0658 mL
    30 mM 0.0689 mL 0.3443 mL 0.6886 mL 1.7215 mL
    40 mM 0.0516 mL 0.2582 mL 0.5165 mL 1.2911 mL
    50 mM 0.0413 mL 0.2066 mL 0.4132 mL 1.0329 mL
    60 mM 0.0344 mL 0.1722 mL 0.3443 mL 0.8608 mL
    80 mM 0.0258 mL 0.1291 mL 0.2582 mL 0.6456 mL
    100 mM 0.0207 mL 0.1033 mL 0.2066 mL 0.5165 mL

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    FTI-277 hydrochloride
    製品番号:
    HY-15872A
    数量:
    MCE 日本正規代理店: