2. PROTAC Cell Cycle/DNA Damage
  3. Molecular Glues CDK
  4. CDK4 degrader 1

CDK4 degrader 1 (ML 1–71) is a molecular glue degrader that targets CDK4.

Para uso exclusivo en investigación. No vendemos a pacientes.

CDK4 degrader 1

CDK4 degrader 1 Estructura química

No. CAS : 3094209-58-9

Tamaño Precio Stock Cantidad
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 En stock
Solution
10 mM * 1 mL in DMSO En stock
Solid
5 mg En stock
10 mg En stock
25 mg En stock
50 mg En stock
100 mg   Obtener un presupuesto  
200 mg   Obtener un presupuesto  

* Seleccione Cantidad antes de agregar artículos.

This product is a controlled substance and not for sale in your territory.

Revisión del cliente

Based on 1 Customer Validation

CDK4 degrader 1 Related Antibodies

Top Publications Citing Use of Products

Ver todos los productos específicos de isoformas CDK:

Ver todas las isoformas
CDK1 CDK2 CDK3 CDK4 CDK5 CDK6 CDK7 CDK8 CDK9 CDK11 CDK12 CDK13 CDK14 CDK16 CDK19 CDC CLK Pho85 CDK10 CDK15 CDK17 CDK18 CDK20 PITSLRE

  • Actividad biológica

  • Pureza y Documentación

  • Referencias

  • Revisión del cliente

Descripciòn

CDK4 degrader 1 (ML 1–71) is a molecular glue degrader that targets CDK4[1].

IC50 & Target

CDK4

 

In Vitro

CDK4 degrader 1 (0-10 μM; 24 h) significantly degrades CDK4 in cells in a dose-dependent manner[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

CDK4 degrader 1 Related Antibodies

Western Blot Analysis[1]

Cell Line: C33A cervical cancer cells
Concentration: 0.1, 1, 5, 10 μM
Incubation Time: 24 h
Result: Significantly degraded CDK4 in cells in a dose-dependent manner.
Peso molecular

524.64

Fòrmula

C25H32N8O3S
No. CAS
Appearance

Solid

Color

White to off-white

SMILES

O=C(C1=CC2=CN=C(NC3=NC=C(N4CCN(S(=O)(C=C)=O)CC4)C=C3)N=C2N1C5CCCC5)N(C)C
Envío

Room temperature in continental US; may vary elsewhere.
Almacenamiento
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
Solvente y solubilidad
In Vitro: 

DMSO : 25 mg/mL (47.65 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.9061 mL 9.5303 mL 19.0607 mL
5 mM 0.3812 mL 1.9061 mL 3.8121 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Calculadora de molaridad

  • Calculadora de dilución

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (4.77 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (4.77 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación

Purity: 99.83%

SDS (251 KB)

COA (248 KB) HNMR (143 KB) RP-HPLC (172 KB) LCMS (235 KB)

Instrucciones de manejo (2659 KB)
Referencias

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 1.9061 mL 9.5303 mL 19.0607 mL 47.6517 mL
5 mM 0.3812 mL 1.9061 mL 3.8121 mL 9.5303 mL
10 mM 0.1906 mL 0.9530 mL 1.9061 mL 4.7652 mL
15 mM 0.1271 mL 0.6354 mL 1.2707 mL 3.1768 mL
20 mM 0.0953 mL 0.4765 mL 0.9530 mL 2.3826 mL
25 mM 0.0762 mL 0.3812 mL 0.7624 mL 1.9061 mL
30 mM 0.0635 mL 0.3177 mL 0.6354 mL 1.5884 mL
40 mM 0.0477 mL 0.2383 mL 0.4765 mL 1.1913 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

CDK4 degrader 1 Related Classifications

Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

CDK4 degrader 13094209-58-9Molecular GluesCDKCyclin dependent kinaseInhibitorinhibitorinhibit

Productos vistos recientemente:

Consulta en línea

Your information is safe with us. * Required Fields.

Nombre del producto

  

Requested Quantity *

Nombre del solicitante *

 

Saludo

Direcciòn del E-mail *

 

Número de teléfono *

Department

 

Nombre de la Organizaciòn *

City

Provincia

Country or Region *

      

Observaciones

Consulta para venta a granel

Inquiry Information

Nombre del producto:
CDK4 degrader 1
Cat. No.:
HY-163640
Cantidad:
MCE Japan Authorized Agent:

Revisión del cliente

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

Nombre del producto

  

Lot #

Nombre del solicitante *

 

Direcciòn del E-mail *

Número de teléfono

 

Department *

Nombre de la Organizaciòn *

 

Country or Region *

Observaciones

SAFETY DATA SHEET (SDS)

English - EN (251 KB) Français - FR (251 KB) Deutsch - DE (251 KB) Norwegian - NO (251 KB) Español - ES (251 KB) Swedish - SV (251 KB) Italian - IT (251 KB) Korean - KR (251 KB) Portuguese - PT (251 KB)

Request for HNMR Report

We have received your request and will respond to you as soon as possible.