1. Metabolic Enzyme/Protease Vitamin D Related/Nuclear Receptor
  2. Endogenous Metabolite Estrogen Receptor/ERR
  3. Estrone sulfate potassium

Estrone sulfate potassium is an inactive endogenous estrogen that can be converted into Estrone (HY-B0234) and Estradiol (HY-B0141). Estrone sulfate potassium is also a substrate of the OATP1B3 transporter. Estrone sulfate potassium can be converted into Estrone and Estradiol in normal mammary parenchymal cells. Estrone sulfate potassium stimulates the growth of nitrosomethylurea-induced mammary tumors in ovariectomized rats and the colony formation of dispersed nitrosomethylurea mammary cells, with conversion into Estrone and Estradiol occurring both in vivo and in vitro during this process. Estrone sulfate potassium is applicable to breast cancer-related research.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Estrone sulfate potassium

Estrone sulfate (potassium) 構造式

CAS 番号 : 1240-04-6

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 268 在庫あり
Solution
10 mM * 1 mL in DMSO USD 268 在庫あり
Solid
1 mg $97 在庫あり
5 mg $244 在庫あり
10 mg $391 在庫あり
25 mg $685 在庫あり
50 mg $1025 在庫あり
100 mg $1435 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 3 publication(s) in Google Scholar

Other Forms of Estrone sulfate potassium:

Top Publications Citing Use of Products

Endogenous Metabolite アイソフォーム固有の製品をすべて表示:

Estrogen Receptor/ERR アイソフォーム固有の製品をすべて表示:

  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Estrone sulfate potassium is an inactive endogenous estrogen that can be converted into Estrone (HY-B0234) and Estradiol (HY-B0141). Estrone sulfate potassium is also a substrate of the OATP1B3 transporter. Estrone sulfate potassium can be converted into Estrone and Estradiol in normal mammary parenchymal cells. Estrone sulfate potassium stimulates the growth of nitrosomethylurea-induced mammary tumors in ovariectomized rats and the colony formation of dispersed nitrosomethylurea mammary cells, with conversion into Estrone and Estradiol occurring both in vivo and in vitro during this process. Estrone sulfate potassium is applicable to breast cancer-related research[1][2][3][4].

IC50 & Target

Human Endogenous Metabolite

 

体外実験

Estrone sulfate (1.0 μM; 1-64 min) potassium is taken up at a low rate by dispersed normal breast parenchymal cells, resulting in a cells/medium concentration ratio of 0.20-0.33 when incubated at 37°C[2].
Estrone sulfate (1.0 nM-100 μM) potassium is converted to estrone by dispersed normal breast parenchymal cells with a mean half-time of 628 min per 106 cells (intact cells) or 246 min per 106 cells (homogenized cells)[2].
Estrone sulfate potassium is not produced via conversion of estrone by dispersed normal breast parenchymal cells under conditions where MCF-7 breast cancer cells exhibit sulfotransferase activity[2].
Estrone sulfate potassium stimulates colony formation in dispersed nitrosomethylurea mammary cells and is converted to estrone and estradiol by these cells[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

体内実験

Estrone sulfate (30-3000 pmol/hr; 400-1300 pmol/hr; s.c.; continuous infusion; 14 days) potassium exerts dose-related stimulatory effects on nitrosomethylurea-induced hormone-responsive mammary tumor growth in castrate rats, with significant conversion to estrone and estradiol[3].
Estrone sulfate (75 mg/kg; p.o; daily; for 5 days) potassium reduces glucose-6-phosphatase activity and protein levels, and lowers blood glucose in ob/ob mice[4].
Estrone sulfate potassium modulates glucose-6-phosphatase kinetic parameters in control mice[4].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: Sprague-Dawley (female, castrated, nitrosomethylurea-induced mammary tumor model)[3]
Dosage: 30 pmol/hr; 300 pmol/hr; 3000 pmol/hr; 400 pmol/hr; 1300 pmol/hr
Administration: s.c.; continuous infusion; 14 days
Result: Did not significantly alter castration-induced tumor regression at 30 pmol/hr; partially blunted castration-induced tumor regression at 300 pmol/hr; stimulated tumor growth at 3000 pmol/hr; Observed significantly different tumor growth slopes for 300 and 3000 pmol/hr doses; Detected 14%, 10%, and 13% conversion to estradiol, and 24%, 22%, and 28% conversion to estrone on days 7, 10, and 14, respectively, at 400 pmol/hr; Recorded similar conversion rates at 1300 pmol/hr; Measured serum estradiol levels of 17 pg/ml (400 pmol/hr), 56 pg/ml (1300 pmol/hr), 6.8 ± 1.2 pg/ml (300 pmol/hr, day 14), and 48 ± 10.2 pg/ml (3000 pmol/hr, day 14).
分子量

388.52

分子式

C18H21KO5S

CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

C[C@]1([C@](CC2)([H])[C@]3([H])CCC4=C(C=CC(OS(=O)([O-])=O)=C4)[C@@]3([H])CC1)C2=O.[K+]

Structure Classification
Initial Source
輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶剤 & 溶解度
体外: 

DMSO : 100 mg/mL (257.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5739 mL 12.8694 mL 25.7387 mL
5 mM 0.5148 mL 2.5739 mL 5.1477 mL
10 mM 0.2574 mL 1.2869 mL 2.5739 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (6.43 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (6.43 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 99.94%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.5739 mL 12.8694 mL 25.7387 mL 64.3468 mL
5 mM 0.5148 mL 2.5739 mL 5.1477 mL 12.8694 mL
10 mM 0.2574 mL 1.2869 mL 2.5739 mL 6.4347 mL
15 mM 0.1716 mL 0.8580 mL 1.7159 mL 4.2898 mL
20 mM 0.1287 mL 0.6435 mL 1.2869 mL 3.2173 mL
25 mM 0.1030 mL 0.5148 mL 1.0295 mL 2.5739 mL
30 mM 0.0858 mL 0.4290 mL 0.8580 mL 2.1449 mL
40 mM 0.0643 mL 0.3217 mL 0.6435 mL 1.6087 mL
50 mM 0.0515 mL 0.2574 mL 0.5148 mL 1.2869 mL
60 mM 0.0429 mL 0.2145 mL 0.4290 mL 1.0724 mL
80 mM 0.0322 mL 0.1609 mL 0.3217 mL 0.8043 mL
100 mM 0.0257 mL 0.1287 mL 0.2574 mL 0.6435 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Estrone sulfate potassium
製品番号:
HY-113293A
数量:
MCE 日本正規代理店: