2. Others GPCR/G Protein
  3. Prostaglandin Receptor Environmental Pollutants
  4. Ricinoleic acid (purity≥85%)

Ricinoleic acid (purity≥85%)  (Synonyms: Ricinoleic acid)

製品番号: HY-N6070 純度: 85.0%
COA 取扱説明書 Technical Support

Ricinoleic acid (purity≥85%), a hydroxy fatty acid, is an attractive feedstock for the production of high-performance lubricants, cosmetics, polymers, surfactants, and coatings. Ricinoleic acid is the main active ingredient of Castor oil (HY-107799). Ricinoleic acid is the agonist for prostaglandin EP3 receptor (EP3 receptor) (EC50 in MEG-01 is 0.5 μM), that causes laxative effects and uterine contraction. Ricinoleic acid exhibits antianxiety-like, anti-inflammatory and pro-inflammatory properties.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Ricinoleic acid (purity≥85%)

Ricinoleic acid (purity≥85%) 構造式

CAS 番号 : 141-22-0

容量 価格（税別） 在庫状況 数量
Liquid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 38 在庫あり
Solution
10 mM * 1 mL in DMSO USD 38 在庫あり
Liquid
100 mg $35 在庫あり
500 mg $90 在庫あり
1 g $135 在庫あり
5 g $270 在庫あり
10 g $400 在庫あり
25 g $700 在庫あり
50 g $1050 在庫あり
100 g $1575 在庫あり
> 100 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Ricinoleic acid (purity≥85%):

Ricinoleic acid (purity≥85%) 関連抗体

Top Publications Citing Use of Products

Prostaglandin Receptor アイソフォーム固有の製品をすべて表示:

すべてのアイソフォームを表示
DP EP FP IP TXA2/TP TXB2

  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Ricinoleic acid (purity≥85%), a hydroxy fatty acid, is an attractive feedstock for the production of high-performance lubricants, cosmetics, polymers, surfactants, and coatings. Ricinoleic acid is the main active ingredient of Castor oil (HY-107799). Ricinoleic acid is the agonist for prostaglandin EP3 receptor (EP3 receptor) (EC50 in MEG-01 is 0.5 μM), that causes laxative effects and uterine contraction. Ricinoleic acid exhibits antianxiety-like, anti-inflammatory and pro-inflammatory properties[1][2][3][4][5].

体外実験

Ricinoleic acid (10-100 μM, 24 h) inhibits the release of β-HEX in RBL-2H3 cells induced by DNP-BSA in a dose-dependent manner in RBL-2H3 cells[2].
Ricinoleic acid (10-100 μM, 24 h) inhibits glucose production in a dosedependent manner in H4IIE cells[2].
Ricinoleic acid (100 μM, 80 min) increases contractile activity in intestinal and uterine smooth muscle of wild-type mice, thereby promoting intestinal peristalsis and uterine contraction, leading to laxative effect and labor[4].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Ricinoleic acid (purity≥85%) 関連抗体

Western Blot Analysis[2]

Cell Line: H4IIE cells
Concentration: 100 μM
Incubation Time: 1 h
Result: Increased the level of GSK-3β phosphorylation at Ser9.
Increased the stability of β-catenin at the protein level.
Decreased the phosphorylated GS to total GS ratio.
体内実験

Ricinoleic acid (5%, single dose, sc) exhibits antianxiety-like effect in C57BL/6J mouse models[3].
Ricinoleic acid (0.3-100 mg/guinea pig, eyelid surface administration) enhances eyelid edema at low doses, suppresses eyelid edema after repeat application in Carrageenan (HY-125474)-induced guinea-pig eyelid edema models[5].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: C57BL/6J mouse elevated zero maze models[3]
Dosage: 5%
Administration: single dose, sc
Result: Increased the open zone occupancy in the elevated zero maze.
Animal Model: Carrageenan-induced guinea-pig eyelid edema models[5]
Dosage: 0.3-100 mg/guinea pig, or 0.9 mg/guinea pig for repeat application
Administration: eyelid surface administration, single dose or 8 days for repeat application
Result: Enhanced eyelid edema at low doses, suppressed eyelid edema after repeat application.
分子量

298.46

分子式

C18H34O3
CAS 番号
Appearance

Liquid (Density: 0.940 g/cm3)

Color

Light yellow to brown

SMILES

OC(CCCCCCC/C=C\C[C@H](O)CCCCCC)=O
Structure Classification
Initial Source
輸送条件

Room temperature in continental US; may vary elsewhere.
保管条件

4°C, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
溶剤 & 溶解度
体外: 

DMSO : 100 mg/mL (335.05 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H2O : < 0.1 mg/mL (insoluble)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 3.3505 mL 16.7527 mL 33.5053 mL
5 mM 0.6701 mL 3.3505 mL 6.7011 mL
10 mM 0.3351 mL 1.6753 mL 3.3505 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始）

C1

×
体積 （開始）

V1

=
濃度 （終了）

C2

×
体積 （終了）

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (8.38 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: 2.5 mg/mL (8.38 mM); Suspended solution; Need ultrasonic

    This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  Saline

    Solubility: 1 mg/mL (3.35 mM); Suspended solution; Need ultrasonic and warming and heat to 60°C

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 85.0%

COA (239 KB) HNMR (265 KB) MS (68 KB) OR (234 KB)

取扱説明書 (2659 KB)
参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 3.3505 mL 16.7527 mL 33.5053 mL 83.7633 mL
5 mM 0.6701 mL 3.3505 mL 6.7011 mL 16.7527 mL
10 mM 0.3351 mL 1.6753 mL 3.3505 mL 8.3763 mL
15 mM 0.2234 mL 1.1168 mL 2.2337 mL 5.5842 mL
20 mM 0.1675 mL 0.8376 mL 1.6753 mL 4.1882 mL
25 mM 0.1340 mL 0.6701 mL 1.3402 mL 3.3505 mL
30 mM 0.1117 mL 0.5584 mL 1.1168 mL 2.7921 mL
40 mM 0.0838 mL 0.4188 mL 0.8376 mL 2.0941 mL
50 mM 0.0670 mL 0.3351 mL 0.6701 mL 1.6753 mL
60 mM 0.0558 mL 0.2792 mL 0.5584 mL 1.3961 mL
80 mM 0.0419 mL 0.2094 mL 0.4188 mL 1.0470 mL
100 mM 0.0335 mL 0.1675 mL 0.3351 mL 0.8376 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Ricinoleic acid (purity≥85%) Related Classifications

  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始） × 体積 （開始） = 濃度 （終了） × 体積 （終了）
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Ricinoleic acid (purity≥85%)141-22-0Prostaglandin ReceptorEnvironmental PollutantsEnvironmental Contaminantsantianxiety-likeanti-inflammatorypro-inflammatorylaxativelaborInhibitorinhibitorinhibit

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

  

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

      

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Ricinoleic acid (purity≥85%)
製品番号:
HY-N6070
数量:
MCE 日本正規代理店:

カスタマーレビュー

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

製品名

  

Lot #

お名前 *

 

メールアドレス *

電話番号 *

 

部門 *

組纖名 *

 

国或いは地域 *

備考

Request for HNMR Report

We have received your request and will respond to you as soon as possible.