2. Anti-infection
  3. Bacterial Antibiotic
  4. Kanamycin sulfate

Kanamycin sulfate  (Synonyms: Kanamycin A sulfate)

Cat. No.: HY-16566A Pureza: 99.96%
COA
SDS
Instrucciones de manejo Technical Support

Kanamycin (Kanamycin A) sulfate is an orally active antibacterial (gram-negative/positive bacteria) agent, inhibits translocation and causes misencoding by binding to the 70 S ribosomal subunit. Kanamycin sulfate shows good inhibitory activity to both M. tuberculosis (sensitive and drug-resistant ) and K. pneumonia, which can be used in studies of tuberculosis and pneumonia.

Para uso exclusivo en investigación. No vendemos a pacientes.

No. CAS : 25389-94-0

Tamaño Precio Stock Cantidad
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in Water
ready for reconstitution
 En stock
Solution
10 mM * 1 mL in Water En stock
Solid
200 mg En stock
1 g En stock
5 g En stock
10 g En stock
25 g En stock
50 g En stock
100 g En stock
> 100 g   Obtener un presupuesto  

* Seleccione Cantidad antes de agregar artículos.

This product is a controlled substance and not for sale in your territory.

Revisión del cliente

Based on 29 publication(s) in Google Scholar

Other Forms of Kanamycin sulfate:

Kanamycin sulfate Related Antibodies

Top Publications Citing Use of Products

29 Publications Citing Use of MCE Kanamycin sulfate

Microbiological Assay

    Kanamycin sulfate purchased from MedChemExpress. Usage Cited in: AMB Express. 2024 Dec 24;14(1):141.  [Abstract]

    Combinational antimicrobial effects between PVB and conventional antibiotics against MRSA ATCC 43,300. TET, Tetracycline. DOX, Doxycycline. E, Erythromycin. AZI, Azithromycin. P, Penicillin. CAZ, Ceftazidime. AMP, Ampicillin. CEZ, Cefazolin. CEF, Cefotaxime. OXA, Oxacillin. CRO, Ceftriaxone. AMK, Amikacin. GEN, Gentamycin, KANA, Kanamycin. TOB, Tobramycin. SPC, Spectinomycin.

    Ver todos los productos específicos de isoformas Antibiotic:

    Ver todas las isoformas
    Aminoglycoside Glycopeptide Lipopeptide Macrolide Oxazolidinone Quinolone Tetracycline β-lactam

    • Actividad biológica

    • Pureza y Documentación

    • Referencias

    • Revisión del cliente

    Descripciòn

    Kanamycin (Kanamycin A) sulfate is an orally active antibacterial (gram-negative/positive bacteria) agent, inhibits translocation and causes misencoding by binding to the 70 S ribosomal subunit. Kanamycin sulfate shows good inhibitory activity to both M. tuberculosis (sensitive and drug-resistant ) and K. pneumonia, which can be used in studies of tuberculosis and pneumonia[1][2][3][4].

    In Vitro

    Kanamycin sulfate (0.1-100 μg/mL; 2 weeks) exhibits good antibacterial activity (MIC=1-5 μg/mL) to various strains of mycobacteria in vitro[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Kanamycin sulfate Related Antibodies

    Cell Viability Assay[1]

    Cell Line: mycobacteria H37Rv, H2, H37RvR-PAS, Ravenel, Kirchbergand and BCG.
    Concentration: 0.1-100 μg/mL
    Incubation Time: 2 weeks
    Result: Showed good antibacterial activity to various strains of mycobacteria (H37Rv, H2, H37RvR-PAS, Ravenel, and BCG) with MICs were 1 μg/mL and 5 μg/mL for strain of Kirchbergand.
    In Vivo

    Kanamycin sulfate (2, 4 mg/kg; s.c.; once daily, 6 times a week for 3 weeks) inhibits growth of bovine tubercle bacilli in lung and spleen of mice[1].
    Kanamycin sulfate (1.25, 5 mg/kg; s.c.; single (at 3 h after infection)) inhibits the multiplication of K. pneumonia DT-S in lung, trachea, and blood of mice and in proportion to the dose administration, and also increases the survival rate of mice[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Model: Inbred strain normal mice (14-16 g; bovine tubercle bacilli (Ravenel strain) infected model)[1].
    Dosage: 2, 4 mg/kg
    Administration: Subcutaneous injection; once daily, 6 times a week for 3 weeks.
    Result: Exerted a marked effect to inhibit the multiplication of the tuberculosis in vivo, especially in the lung of mice.
    Animal Model: Slc:ICR male mice (4-week-old; 18-24 g; K. pneumonia DT-S infection model (by the aerosol method))[2].
    Dosage: 1.25, 5 mg/kg
    Administration: Subcutaneous administration; single (at 3 h after infection).
    Result: Suppressed the growth of K. pneumonia DT-S in lung, trachea, and blood in proportion to the dose administration.
    Resulted in 90% survival at 6 days after infection (negative control group: all died within 4 days), and cleared the K. pneumonia DT-S from lung, trachea, and blood of mice within 48 h (when dosage at 5 mg/kg).
    Peso molecular

    582.58

    Fòrmula

    C18H38N4O15S
    No. CAS
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    OS(O)(=O)=O.O[C@H]1[C@](O[C@@H]2[C@@H](N)C[C@@H](N)[C@H](O[C@@]3([H])O[C@H](CO)[C@@H](O)[C@H](N)[C@H]3O)[C@H]2O)([H])O[C@H](CN)[C@@H](O)[C@@H]1O
    Structure Classification
    Initial Source

    Streptomyces kanamyceticus
    Envío

    Room temperature in continental US; may vary elsewhere.
    Almacenamiento

    4°C, sealed storage, away from moisture

    *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

    Solvente y solubilidad
    In Vitro: 

    H2O : ≥ 25 mg/mL (42.91 mM)

    DMSO : < 1 mg/mL (insoluble or slightly soluble)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.7165 mL 8.5825 mL 17.1650 mL
    5 mM 0.3433 mL 1.7165 mL 3.4330 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • Calculadora de molaridad

    • Calculadora de dilución

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo:

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  PBS

      Solubility: 50 mg/mL (85.83 mM); Clear solution; Need ultrasonic

    • Protocol 2

      Add each solvent one by one:  Saline

      Solubility: 50 mg/mL (85.83 mM); Clear solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
    Pureza y Documentación

    Purity: 99.96%

    SDS (418 KB)

    COA (257 KB) HNMR (234 KB) RP-HPLC (244 KB) MS (69 KB)

    Instrucciones de manejo (2659 KB)
    Referencias

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    H2O 1 mM 1.7165 mL 8.5825 mL 17.1650 mL 42.9126 mL
    5 mM 0.3433 mL 1.7165 mL 3.4330 mL 8.5825 mL
    10 mM 0.1717 mL 0.8583 mL 1.7165 mL 4.2913 mL
    15 mM 0.1144 mL 0.5722 mL 1.1443 mL 2.8608 mL
    20 mM 0.0858 mL 0.4291 mL 0.8583 mL 2.1456 mL
    25 mM 0.0687 mL 0.3433 mL 0.6866 mL 1.7165 mL
    30 mM 0.0572 mL 0.2861 mL 0.5722 mL 1.4304 mL
    40 mM 0.0429 mL 0.2146 mL 0.4291 mL 1.0728 mL

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    Kanamycin sulfate Related Classifications

    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Keywords:

    Kanamycin25389-94-0Kanamycin ABacterialAntibiotictuberculosismycobacteriabovine tubercle bacillistreptomycinK. pneumoniapneumoniaInhibitorinhibitorinhibit

    Productos vistos recientemente:

    Consulta en línea

    Your information is safe with us. * Required Fields.

    Nombre del producto

    		  

    Requested Quantity *

    Nombre del solicitante *

    		 

    Saludo

    Direcciòn del E-mail *

    		 

    Número de teléfono *

    Department

    		 

    Nombre de la Organizaciòn *

    City

    Provincia

    Country or Region *

    		      

    Observaciones

    Consulta para venta a granel

    Inquiry Information

    Nombre del producto:
    Kanamycin sulfate
    Cat. No.:
    HY-16566A
    Cantidad:
    MCE Japan Authorized Agent:

    Revisión del cliente

    Thank You for Your Feedback!

    Request for HNMR Report

    Please fill out this form to request the QC report. We will send it to your Email address shortly.

    Your information is safe with us. * Required Fields.

    Nombre del producto

    		  

    Lot #

    Nombre del solicitante *

    		 

    Direcciòn del E-mail *

    Número de teléfono

    		 

    Department *

    Nombre de la Organizaciòn *

    		 

    Country or Region *

    Observaciones

    SAFETY DATA SHEET (SDS)

    English - EN (418 KB) Français - FR (418 KB) Deutsch - DE (418 KB) Norwegian - NO (418 KB) Español - ES (418 KB) Swedish - SV (418 KB) Italian - IT (418 KB) Korean - KR (418 KB) Portuguese - PT (418 KB)

    Request for HNMR Report

    We have received your request and will respond to you as soon as possible.