1. Epigenetics TGF-beta/Smad
  2. PKC
  3. Go 6983

Go 6983  (Synonyms: GÖ 6983; Goe 6983)

製品番号: HY-13689 純度: 99.23%
COA 取扱説明書 Technical Support

Go 6983 is a pan-PKC inhibitor against for PKCα, PKCβ, PKCγ, PKCδ and PKCζ with IC50 of 7 nM, 7 nM, 6 nM, 10 nM and 60 nM, respectively.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 133053-19-7

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 116 在庫あり
Solution
10 mM * 1 mL in DMSO USD 116 在庫あり
Solid
5 mg $106 在庫あり
10 mg $172 在庫あり
25 mg $338 在庫あり
50 mg $520 在庫あり
100 mg $780 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 82 publication(s) in Google Scholar

Other Forms of Go 6983:

Top Publications Citing Use of Products

顧客検証

WB
RT-PCR
Flow Cytometry
IF

    Go 6983 purchased from MedChemExpress. Usage Cited in: Nat Commun. 2025 Feb 7;16(1):1429.  [Abstract]

    g-j. The effects of JNK (JNK-IN-8) (25 nM) and PKC (Go 6983) (100 nM) inhibition on the expression of Cxcl10 and Ccl4 in MC38 and Panc02 cells.

    Go 6983 purchased from MedChemExpress. Usage Cited in: Nat Commun. 2025 Feb 7;16(1):1429.  [Abstract]

    FACS analysis of CD8+ T-cell proliferation (CFSE low) in cultured with conditioned media derived from MC38 cells treated with WNT11 and inhibitors of CAMKII (CAMKII-IN-1)(100 nM), JNK (JNK-IN-8)(25 nM) and PKC (Go 6983)(100 nM) as indicated.

    Go 6983 purchased from MedChemExpress. Usage Cited in: Cell Death Dis. 2018 Feb 7;9(2):165.  [Abstract]

    Western blot analysis of MCF-7 cells treated with Tan IIA at the specified concentrations for the expression of cytosolic PKC isoforms. The compound Go 6983 (GO, 20 μM) is included as a positive control.

    Go 6983 purchased from MedChemExpress. Usage Cited in: Biochem Biophys Res Commun. 2018 Sep 3;503(1):62-70.  [Abstract]

    BMMs are incubated in serum-free medium and pretreated with or without Go6983 (0, 2.5 μM) for 4 h. Next, the BMMs are stimulated by RANKL (50 ng/mL) for the indicated times (0, 15, 30, 60 min). Additionally, the BMM lysates are analyzed by western blotting.

    Go 6983 purchased from MedChemExpress. Usage Cited in: J Appl Toxicol. 2016 Nov;36(11):1409-17.   [Abstract]

    Protein levels of GLT-1 analyzed by Western blotting in C6 cells then treated with TCDD for 12 h. Cells are pre-treated with Ca2+-signaling blocker BAY-a-1040 (25 nM) for 30min before TCDD stimulation. The PKC inhibitor staurosporine (10 nM) and Go 6983 (1 μM) is applied 2 h before adding TCDD.

    Go 6983 purchased from MedChemExpress. Usage Cited in: J Appl Toxicol. 2016 Nov;36(11):1409-17.   [Abstract]

    Quantitative analysis of the intensity of GLT-1 expression relative to GAPDH in the indicated groups. Cells are pre-treated with Ca2+-signaling blocker BAY-a-1040 (25 nM) for 30min before TCDD stimulation. The PKC inhibitor staurosporine (10 nM) and Go 6983 (1 μM) is applied 2 h before adding TCDD.

    Go 6983 purchased from MedChemExpress. Usage Cited in: J Appl Toxicol. 2016 Nov;36(11):1409-17.   [Abstract]

    Immunofluorescence staining of PKC after pre-treatment with the Ca2+-signaling blocker and the PKC inhibitor. PKC is enriched in cytoplasmor perinucleus in untreated C6 cells (a-c), Go 6983-treated cells (g-i) or BAY-a-1040-treated cells (m-o). TCDD induces PKC translocation to the membrane in C6 glioma cells (d-f ).

    Go 6983 purchased from MedChemExpress. Usage Cited in: Vet Microbiol. 2016 Aug 30:192:26-33.  [Abstract]

    Effect of PKC inhibitor on NF-kB DNA binding activity and NFAT inhibitor on NFATc1 DNA binding activity. Lane N is negative control; lane 1 is control group; lane 2 is S. uberis group; lane 3 is pre-treated with 2 μM Go 6983; lane 4 is pre-treated with 5 μM Go 6983; lane 5 is pre-treated with 10 μM Go 6983.
    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Go 6983 is a pan-PKC inhibitor against for PKCα, PKCβ, PKCγ, PKCδ and PKCζ with IC50 of 7 nM, 7 nM, 6 nM, 10 nM and 60 nM, respectively.

    IC50 & Target[1]

    PKCγ

    6 nM (IC50)

    PKCα

    7 nM (IC50)

    PKCβ

    7 nM (IC50)

    PKCδ

    10 nM (IC50)

    PKCζ

    60 nM (IC50)

    PKCμ

    20000 nM (IC50)

    体外実験

    Go 6983 inhibits PKCμ with IC50 of 20 μM, and the pther PKC isoenzymes can be suppressed by Go 6983 with IC50 values from 7 to 60 nM[1]. Go 6983 (100 nM) significantly reduces PMN adherence to the endothelium and infiltration into the myocardium compared with I/R + PMN hearts, and significantly inhibits superoxide release from PMNs by 90 +/- 2% in rat hearts[2]. Go 6983 (200 nM) has a reduced cardioprotective effect compared with the cardioprotective Go 6983 concentrations (50 and 100 nM) despite inhibiting PMN superoxide release by 99%[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    442.51

    分子式

    C26H26N4O3

    CAS 番号
    Appearance

    Solid

    Color

    Pink to red

    SMILES

    O=C(C(C1=CN(CCCN(C)C)C2=C1C=C(OC)C=C2)=C3C4=CNC5=C4C=CC=C5)NC3=O

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 100 mg/mL (225.98 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.2598 mL 11.2992 mL 22.5984 mL
    5 mM 0.4520 mL 2.2598 mL 4.5197 mL
    10 mM 0.2260 mL 1.1299 mL 2.2598 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.65 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: 2.5 mg/mL (5.65 mM); Suspended solution; Need ultrasonic

      This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.23%

    参考文献
    キナーゼ実験
    [1]

    Phosphorylation reactions are carried out in a total volume of 100 μL, containing buffer C (50 mM Tris-HCl, pH 7.5, 10 mM β-mercaptoethanol), 4 mM MgCl2, 10 μg PS, 100 nM TPA, 5 μL of a Sf158 cell extract as a source of recombinant PKCμ or of Sf9 cell extracts as a source of other recombinant PKC isoenzymes, 10 μg of syntide 2 as substrate, and 35 μM ATP containing 1 μCi [γ-32P]ATP. In some experiments, PS and TPA are omitted or various inhibitors at concentrations indicated in the text are added. After incubation for 10 min at 30°C, the reaction is terminated by transferring 50 μL of the assay mixture onto a 20 mm square piece of phosphocellulose paper, which is washed 3 times in deionized water and twice in acetone. The radioactivity on each paper is determined by liquid scintillation counting.

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.2598 mL 11.2992 mL 22.5984 mL 56.4959 mL
    5 mM 0.4520 mL 2.2598 mL 4.5197 mL 11.2992 mL
    10 mM 0.2260 mL 1.1299 mL 2.2598 mL 5.6496 mL
    15 mM 0.1507 mL 0.7533 mL 1.5066 mL 3.7664 mL
    20 mM 0.1130 mL 0.5650 mL 1.1299 mL 2.8248 mL
    25 mM 0.0904 mL 0.4520 mL 0.9039 mL 2.2598 mL
    30 mM 0.0753 mL 0.3766 mL 0.7533 mL 1.8832 mL
    40 mM 0.0565 mL 0.2825 mL 0.5650 mL 1.4124 mL
    50 mM 0.0452 mL 0.2260 mL 0.4520 mL 1.1299 mL
    60 mM 0.0377 mL 0.1883 mL 0.3766 mL 0.9416 mL
    80 mM 0.0282 mL 0.1412 mL 0.2825 mL 0.7062 mL
    100 mM 0.0226 mL 0.1130 mL 0.2260 mL 0.5650 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Go 6983
    製品番号:
    HY-13689
    数量:
    MCE 日本正規代理店: