2. Cell Cycle/DNA Damage Epigenetics Autophagy Apoptosis
  3. HDAC Autophagy Apoptosis
  4. Mocetinostat

Mocetinostat  (Synonyms: MGCD0103)

製品番号: HY-12164 純度: 99.43%
COA 取扱説明書

Molarity Calculator

Mocetinostat (MGCD0103) is a potent, orally active and isotype-selective HDAC (Class I/IV) inhibitor with IC50s of 0.15, 0.29, 1.66 and 0.59 μM for HDAC1, HDAC2, HDAC3 and HDAC11, respectively. Mocetinostat shows no inhibition on HDAC4, HDAC5, HDAC6, HDAC7, or HDAC8.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Mocetinostat 構造式

Mocetinostat 構造式

CAS 番号 : 726169-73-9

容量 価格（税別） 在庫状況 数量
無料サンプル (0.1 - 0.5 mg)   今すぐ申し込む  
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 73 在庫あり
Solution
10 mM * 1 mL in DMSO USD 73 在庫あり
Solid
10 mg USD 66 在庫あり
50 mg USD 131 在庫あり
100 mg USD 210 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 11 publication(s) in Google Scholar

Mocetinostat 関連抗体

Top Publications Citing Use of Products

HDAC アイソフォーム固有の製品をすべて表示:

すべてのアイソフォームを表示
HDAC HDAC1 HDAC2 HDAC3 HDAC4 HDAC5 HDAC6 HDAC7 HDAC8 HDAC9 HDAC10 HDAC11 HD1 HD2

  • 生物活性

  • プロトコル

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Mocetinostat (MGCD0103) is a potent, orally active and isotype-selective HDAC (Class I/IV) inhibitor with IC50s of 0.15, 0.29, 1.66 and 0.59 μM for HDAC1, HDAC2, HDAC3 and HDAC11, respectively. Mocetinostat shows no inhibition on HDAC4, HDAC5, HDAC6, HDAC7, or HDAC8.

IC50 & Target[1]

HDAC1

0.15 μM (IC50)

HDAC2

0.29 μM (IC50)

HDAC11

0.59 μM (IC50)

HDAC3

1.66 μM (IC50)

体外実験

Mocetinostat is a potent, orally active and isotype-selective HDAC (Class I/IV) inhibitor with IC50s of 0.15, 0.29, 1.66 and 0.59 μM for HDAC1, HDAC2, HDAC3 and HDAC11, respectively. Mocetinostat shows no inhibition on HDAC4, HDAC5, HDAC6, HDAC7, or HDAC8. Mocetinostat (MGCD0103) exhibits potent and selective antiproliferative activities against a broad spectrum of human cancer cell lines in vitro, and HDAC inhibitory activity is required for these effects. In all cell lines tested, Mocetinostat (MGCD0103) partially inhibits cellular HDAC enzyme activity although the maximal inhibition of activity varies among cell lines from 75% to 85% of total activity. The IC50 of Mocetinostat in intact cancer cells is independent of tissue origin. In A549 cells, MGCD0103 shows dose-dependent inhibition of HDAC activity in whole cells. At high concentrations in A549 cells, Mocetinostat inhibits a maximum of 80% of total activity. In HCT116 cells, Mocetinostat induces a significant S-phase depletion and both G1 and G2-M accumulation[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Mocetinostat 関連抗体
体内実験

Mocetinostat (MGCD0103) significantly inhibits growth of human tumor xenografts in nude mice in a dose-dependent manner and the antitumor activity correlated with induction of histone acetylation in tumors. The p.o. administration of Mocetinostat (MGCD0103) (2HBr salt) significantly reduces growth of implanted advanced A549 tumors in nude mice in a dose-dependent manner after 13 days of daily administration. Mocetinostat (170 mg/kg for 2HBr salt, corresponding to 120 mg/kg of free base) significantly blocks growth of tumors compared with vehicle treatment alone (P<0.05 in post-ANOVA Dunnett's test) with no change in body weight[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
臨床実験
分子量

396.44

分子式

C23H20N6O
CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

O=C(C1=CC=C(C=C1)CNC2=NC=CC(C3=CC=CN=C3)=N2)NC4=CC=CC=C4N
輸送条件

Room temperature in continental US; may vary elsewhere.
保管条件
Powder -20°C 3 years
  4°C 2 years
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

DMSO : 50 mg/mL (126.12 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5224 mL 12.6122 mL 25.2245 mL
5 mM 0.5045 mL 2.5224 mL 5.0449 mL
10 mM 0.2522 mL 1.2612 mL 2.5224 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (5.25 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.08 mg/mL (5.25 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 99.43%

COA (246 KB) RP-HPLC (195 KB)

取扱説明書 (2659 KB)
参考文献
細胞実験
[1]

Cells in 96-well plates are incubated with Mocetinostat at various concentrations for 72 h at 37°C in 5% CO2. MTT is added at a final concentration of 0.5 mg/mL and incubated with the cells for 4 h before an equal volume of solubilization buffer [50% N,N-dimethylformamide, 20% SDS (pH 4.7)] is added. After overnight incubation, solubilized dye is quantified by reading at 570 nm using a reference at 630 nm. Absorbance values are converted to cell numbers according to a standard growth curve of the relevant cell line. The concentration which reduces cell numbers to 50% relative to DMSO-treated cells is determined as MTT IC50[1].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
動物実験
[1][2]

Mice[1]
Female CD-1 nude mice, ages 8 to 10 wk are used. Tumor fragments (30 mg), which have been serially passaged thrice in vivo in minimal, are implanted s.c. through a small surgical incision on the flank of the mice while under general anesthesia. Mocetinostat is dissolved in vehicle (PBS acidified with 0.1 N HCl or PEG400/0.2 N HCl saline, 40:60) and dosed p.o. as solutions daily. Tumor volumes and body weight are monitored thrice weekly for at least 2 wk. Each experimental group containe six to eight animals. For pharmacokinetic study, blood is collected from animals at various time points, and plasma samples are analyzed.
Rats[2]
Forty rats (220±20 g) are randomly divided into four different dosages of Mocetinostat groups (Low group, Medium group, High group, and control group with 10 rats in each group). Mocetinostat is dissolved in corn oil as suspension at three different concentrations (20, 40, and 80 mg/mL). Three different Mocetinostat groups (Low group, Medium group, and High group) are respectively given Mocetinostat 20, 40, and 80 mg/kg one time by intragastric administration at every morning and last for 7 days. Control group are given saline by same administration method. At 8 days morning, six probe drugs, Bupropion, Phenacetin, Tolbutamide, Metoprolol, Testosterone, and Omeprazole, are mixed in corn oil and given to the rats of three Mocetinostat groups and control group by intragastric administration at a single dosage of 10 mg/kg for Bupropion, Phenacetin, Metoprolol, Testosterone, and Omeprazole and 1 mg/kg for Tolbutamide.

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.5224 mL 12.6122 mL 25.2245 mL 63.0612 mL
5 mM 0.5045 mL 2.5224 mL 5.0449 mL 12.6122 mL
10 mM 0.2522 mL 1.2612 mL 2.5224 mL 6.3061 mL
15 mM 0.1682 mL 0.8408 mL 1.6816 mL 4.2041 mL
20 mM 0.1261 mL 0.6306 mL 1.2612 mL 3.1531 mL
25 mM 0.1009 mL 0.5045 mL 1.0090 mL 2.5224 mL
30 mM 0.0841 mL 0.4204 mL 0.8408 mL 2.1020 mL
40 mM 0.0631 mL 0.3153 mL 0.6306 mL 1.5765 mL
50 mM 0.0504 mL 0.2522 mL 0.5045 mL 1.2612 mL
60 mM 0.0420 mL 0.2102 mL 0.4204 mL 1.0510 mL
80 mM 0.0315 mL 0.1577 mL 0.3153 mL 0.7883 mL
100 mM 0.0252 mL 0.1261 mL 0.2522 mL 0.6306 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Mocetinostat Related Classifications

  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass   Concentration   Volume   Molecular Weight *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Mocetinostat726169-73-9MGCD0103MGCD 0103MGCD-0103HDACAutophagyApoptosisHistone deacetylasesInhibitorinhibitorinhibit

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

  

タイトル

お名前 *

 

PC 用メールアドレス *

電話番号 *

 

勤務先/学校名 *

Department *

 

カスタマ需要量 *

国会或いは地域 *

      

必ず会社名を記載ください。個人への返信は行いません。

メッセージ

バルクお問い合わせ

Inquiry Information

製品名:
Mocetinostat
製品番号:
HY-12164
数量:
MCE 日本正規代理店:

カスタマーレビュー

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

製品名

  

Lot #

お名前 *

 

PC 用メールアドレス *

電話番号 *

 

部門 *

勤務先/学校名 *

 

国会或いは地域 *

メッセージ

Request for HNMR Report

We have received your request and will respond to you as soon as possible.