1. Protein Tyrosine Kinase/RTK Neuronal Signaling Immunology/Inflammation GPCR/G Protein
  2. FAK Histamine Receptor VEGFR
  3. Chloropyramine hydrochloride

Chloropyramine hydrochloride is a histamine receptor H1 antagonist which can also inhibit the biochemical function of VEGFR-3 and FAK.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Chloropyramine hydrochloride

Chloropyramine hydrochloride 構造式

CAS 番号 : 6170-42-9

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 66 在庫あり
Solution
10 mM * 1 mL in DMSO USD 66 在庫あり
Solid
50 mg $60 在庫あり
100 mg   お問い合わせ  
200 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Chloropyramine hydrochloride:

Top Publications Citing Use of Products

Histamine Receptor アイソフォーム固有の製品をすべて表示:

VEGFR アイソフォーム固有の製品をすべて表示:

  • 生物活性

  • プロトコル

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Chloropyramine hydrochloride is a histamine receptor H1 antagonist which can also inhibit the biochemical function of VEGFR-3 and FAK.

IC50 & Target[1]

H1 Receptor

 

VEGFR-3

 

Cellular Effect
Cell Line Type Value Description References
A-375 IC50
1 μM
Compound: 1
Cytotoxicity against human A375 cells after 72 hrs by MTS assay
Cytotoxicity against human A375 cells after 72 hrs by MTS assay
[PMID: 19610651]
BT-474 IC50
1 μM
Compound: 1
Cytotoxicity against human BT474 cells after 72 hrs by MTS assay
Cytotoxicity against human BT474 cells after 72 hrs by MTS assay
[PMID: 19610651]
COLO 205 IC50
1 μM
Compound: 1
Cytotoxicity against human COLO205 cells assessed as cell viability after 72 hrs by MTS assay
Cytotoxicity against human COLO205 cells assessed as cell viability after 72 hrs by MTS assay
[PMID: 19610651]
HT-29 IC50
1 μM
Compound: 1
Cytotoxicity against human HT-29 cells after 72 hrs by MTS assay
Cytotoxicity against human HT-29 cells after 72 hrs by MTS assay
[PMID: 19610651]
MDA-MB-231 IC50
1 μM
Compound: 1
Cytotoxicity against human MDA-MB-231 cells after 72 hrs by MTS assay
Cytotoxicity against human MDA-MB-231 cells after 72 hrs by MTS assay
[PMID: 19610651]
MIA PaCa-2 IC50
1 μM
Compound: 1
Cytotoxicity against human MIAPaCa2 cells after 72 hrs by MTS assay
Cytotoxicity against human MIAPaCa2 cells after 72 hrs by MTS assay
[PMID: 19610651]
PANC-1 IC50
1 μM
Compound: 1
Cytotoxicity against human PANC1 cells after 72 hrs by MTS assay
Cytotoxicity against human PANC1 cells after 72 hrs by MTS assay
[PMID: 19610651]
SAOS-2 IC50
1 μM
Compound: 1
Cytotoxicity against human Saos2 cells after 72 hrs by MTS assay
Cytotoxicity against human Saos2 cells after 72 hrs by MTS assay
[PMID: 19610651]
T47D IC50
1 μM
Compound: 1
Cytotoxicity against human T47D cells after 72 hrs by MTS assay
Cytotoxicity against human T47D cells after 72 hrs by MTS assay
[PMID: 19610651]
体外実験

BT474 cells are highly sensitive to Chloropyramine hydrochloride (compound 1) treatment, whereby 1 µM concentrations cause a 40% reduction of viability after 48 h of treatment. It is found that at 1 µM concentrations of Chloropyramine hydrochloride, viability of control MCF7-pcDNA3 cells is significantly higher than the viability of MCF7-VEGFR-3 cells (P<0.01) and at 10 µM concentration this difference reaches twofold (P<0.001). In the BT474 cells treatment with Chloropyramine hydrochloride also leads to a concentration-dependent decrease of cell proliferation. When treatment with Chloropyramine hydrochloride is continued for 48 h, the breast cancer cells that overexpressed VEGFR-3 undergo apoptosis. This effect is dose-dependent, with 10 µM Chloropyramine hydrochloride inducing apoptosis in more than 60% of BT474 cells. In our model cell lines MCF7-pcDNA3 and MCF7-VEGFR-3, treatment with 10 µM Chloropyramine hydrochloride for 48 h leads to a 4-fold increase in apoptotic cell death in the cell line that overexpressed VEGFR-3 (18% versus 76 % respectively)[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

体内実験

Chloropyramine hydrochloride causes a dramatic reduction of tumor growth in both model systems whereby the tumor size in the treated groups is approximately 20% of the tumor size in vehicle control groups. Doxorubicin administered at 3 mg/kg causes approximately 60% reduction of tumor growth, but has no effect on tumor growth at 0, 3 mg/kg. In contrast, there is a modest effect of Chloropyramine hydrochloride alone (50% reduction of tumor growth). The low-dose combination of Chloropyramine hydrochloride and doxorubicin has a prolonged anti-tumor effect (85% reduction of tumor growth) that is greater than either drug alone[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

326.26

分子式

C16H21Cl2N3

CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

CN(C)CCN(CC1=CC=C(Cl)C=C1)C2=NC=CC=C2.[H]Cl

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶剤 & 溶解度
体外: 

H2O : 100 mg/mL (306.50 mM; Need ultrasonic)

DMSO : 30 mg/mL (91.95 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 3.0650 mL 15.3252 mL 30.6504 mL
5 mM 0.6130 mL 3.0650 mL 6.1301 mL
10 mM 0.3065 mL 1.5325 mL 3.0650 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (6.38 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.08 mg/mL (6.38 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 50 mg/mL (153.25 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
純度とドキュメンテーション

純度: 99.64%

参考文献
キナーゼ実験
[1]

Cells are incubated in presence or absence of Chloropyramine hydrochloride and stained with anti-FAK antibody 4.47 or in combination with paxillin or VEGFR-3. Detection is done with Alexa Fluor 546 secondary antibody and for dual staining combination of Alexa Fluor 488 and Alexa Fluor 546 secondary antibody is used[1].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

細胞実験
[1]

Cell survival is assayed in MTS assay by measuring mitochondrial dehydrogenase activity of metabolically active cells. 5.0×103 (100 µL) cells are plated in 96-well plates and are allowed to attach overnight. One hundred microliters of fresh media with or without Chloropyramine hydrochloride is added to each well. Cells are treated for designated amount of time. MTS assay is performed according the manufacturers protocol[1].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

動物実験
[1]

BT474 and MCF7-VEGFR-3 cells at a concentration of 2 to 5×106 cells per 200 µL are subcutaneously injected into the right flank of the 5 to 6 week old mice, 5 in each group. Treatment with Chloropyramine hydrochloride is started next day after cells injection via intraperitoneal injection (IP) once a day. Tumor size is measured thrice weekly and volume is calculated using the formula length×width2×0.5. Animals are sacrificed after 21 days of treatment or when tumor size reaches protocol end point. Tumor is excised, measured and preserved for protein and RNA preparation and cytochemistry[1].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO / H2O 1 mM 3.0650 mL 15.3252 mL 30.6504 mL 76.6260 mL
5 mM 0.6130 mL 3.0650 mL 6.1301 mL 15.3252 mL
10 mM 0.3065 mL 1.5325 mL 3.0650 mL 7.6626 mL
15 mM 0.2043 mL 1.0217 mL 2.0434 mL 5.1084 mL
20 mM 0.1533 mL 0.7663 mL 1.5325 mL 3.8313 mL
25 mM 0.1226 mL 0.6130 mL 1.2260 mL 3.0650 mL
30 mM 0.1022 mL 0.5108 mL 1.0217 mL 2.5542 mL
40 mM 0.0766 mL 0.3831 mL 0.7663 mL 1.9157 mL
50 mM 0.0613 mL 0.3065 mL 0.6130 mL 1.5325 mL
60 mM 0.0511 mL 0.2554 mL 0.5108 mL 1.2771 mL
80 mM 0.0383 mL 0.1916 mL 0.3831 mL 0.9578 mL
H2O 100 mM 0.0307 mL 0.1533 mL 0.3065 mL 0.7663 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Chloropyramine hydrochloride
製品番号:
HY-B1305
数量:
MCE 日本正規代理店: