1. Metabolic Enzyme/Protease
  2. MMP
  3. Luteolin 7-O-glucuronide

Luteolin 7-O-glucuronide  (Synonyms: Luteolin 7-glucuronide)

製品番号: HY-N1463 純度: 99.98%
COA 取扱説明書 Technical Support

Luteolin 7-O-glucuronide could inhibit Matrix Metalloproteinases (MMP) activities, with IC50s of 17.63, 7.99, 11.42, 12.85, 0.03 μM for MMP-1, MMP-3, MMP-8, MMP-9, MMP-13, respectively.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Luteolin 7-O-glucuronide

Luteolin 7-O-glucuronide 構造式

CAS 番号 : 29741-10-4

容量 価格(税別) 在庫状況 数量
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 101 在庫あり
Solution
10 mM * 1 mL in DMSO USD 101 在庫あり
Solid
1 mg $47 在庫あり
5 mg $99 在庫あり
10 mg $165 在庫あり
25 mg $363 在庫あり
50 mg   お問い合わせ  
100 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 3 publication(s) in Google Scholar

Other Forms of Luteolin 7-O-glucuronide:

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Luteolin 7-O-glucuronide could inhibit Matrix Metalloproteinases (MMP) activities, with IC50s of 17.63, 7.99, 11.42, 12.85, 0.03 μM for MMP-1, MMP-3, MMP-8, MMP-9, MMP-13, respectively[1].

IC50 & Target

MMP-1

17.63 μM (IC50)

MMP-3

7.99 μM (IC50)

MMP-8

11.42 μM (IC50)

MMP-9

12.85 μM (IC50)

MMP13

0.03 μM (IC50)

Cellular Effect
Cell Line Type Value Description References
RAW264.7 CC50
> 100 3
Compound: 21
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
[PMID: 33667099]
RAW264.7 IC50
> 100 3
Compound: 21
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
[PMID: 33667099]
RAW264.7 CC50
>100 3
Compound: 21
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
[PMID: 33667099]
RAW264.7 IC50
>100 3
Compound: 21
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
[PMID: 33667099]
RAW264.7 CC50
> 100 3
Compound: 21
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
Cytotoxicity against mouse RAW264.7 cells assessed as reduction in cell viability measured after 24 hrs by MTT assay
[PMID: 33667099]
RAW264.7 IC50
> 100 3
Compound: 21
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
Inhibition of LPS induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess reagent based assay
[PMID: 33667099]
体外実験

Luteolin 7-O-glucuronide (0-50 μM, 2 h) inhibits NO production and mRNA expression of inflammatory mediators (COX-2, IL-6, IL-1β, and TNF-α) in LPS-stimulated RAW 264.7 macrophages[2].
Luteolin 7-O-glucuronide (0-50 μM, 2 h) inhibits NF-κB, p38, and JNK activation in LPS-stimulated RAW 264.7 macrophages[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Western Blot Analysis[2]

Cell Line: LPS-stimulated RAW 264.7 macrophages
Concentration: 0-50 μM
Incubation Time: 2 h
Result: Inhibited phosphorylation and degradation of IκB.
Inhibited phosphorylation of p38 and JNK.
体内実験

Luteolin 7-O-glucuronide (0.3-3 mg/kg, p.o., once daily for 5 days) improves depression-like and stress coping behaviors in the tail suspension test and forced swimming test in a mouse sleep deprivation model[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: mouse sleep deprivation model[3]
Dosage: 0.3-3 mg/kg
Administration: p.o., once daily for 5 days
Result: Reduced the increased immobility time in sleep-deprived mice.
Reduced the increased plasma corticosterone level.
Reduced TNF-α and IL-1β level and increased BDNF mRNA expression in the hippocampus of sleep-deprived mice.
分子量

462.36

分子式

C21H18O12

CAS 番号
Appearance

Solid

Color

White to light yellow

SMILES

O[C@H]([C@H]([C@@H]([C@@H](C(O)=O)O1)O)O)[C@@H]1OC2=CC(O)=C3C(C=C(C4=CC=C(O)C(O)=C4)OC3=C2)=O

Structure Classification
Initial Source
輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

4°C, protect from light

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

溶剤 & 溶解度
体外: 

DMSO : 125 mg/mL (270.35 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.1628 mL 10.8141 mL 21.6282 mL
5 mM 0.4326 mL 2.1628 mL 4.3256 mL
10 mM 0.2163 mL 1.0814 mL 2.1628 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (4.50 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.08 mg/mL (4.50 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  50% PEG300    50% Saline

    Solubility: 5 mg/mL (10.81 mM); Clear solution; Need ultrasonic

  • Protocol 2

    Add each solvent one by one:  0.5% Methyl cellulose/0.5% Tween-80 in Saline water

    Solubility: 15.71 mg/mL (33.98 mM); Suspended solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 99.98%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.1628 mL 10.8141 mL 21.6282 mL 54.0704 mL
5 mM 0.4326 mL 2.1628 mL 4.3256 mL 10.8141 mL
10 mM 0.2163 mL 1.0814 mL 2.1628 mL 5.4070 mL
15 mM 0.1442 mL 0.7209 mL 1.4419 mL 3.6047 mL
20 mM 0.1081 mL 0.5407 mL 1.0814 mL 2.7035 mL
25 mM 0.0865 mL 0.4326 mL 0.8651 mL 2.1628 mL
30 mM 0.0721 mL 0.3605 mL 0.7209 mL 1.8023 mL
40 mM 0.0541 mL 0.2704 mL 0.5407 mL 1.3518 mL
50 mM 0.0433 mL 0.2163 mL 0.4326 mL 1.0814 mL
60 mM 0.0360 mL 0.1802 mL 0.3605 mL 0.9012 mL
80 mM 0.0270 mL 0.1352 mL 0.2704 mL 0.6759 mL
100 mM 0.0216 mL 0.1081 mL 0.2163 mL 0.5407 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Luteolin 7-O-glucuronide
製品番号:
HY-N1463
数量:
MCE 日本正規代理店: