2. PI3K/Akt/mTOR
  3. PI3K
  4. Tenalisib

Tenalisib (RP6530) is a novel, potent, and selective PI3Kδ and PI3Kγ inhibitor with IC50 values of 25 and 33 nM, respectively.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Tenalisib

Tenalisib 構造式

CAS 番号 : 1639417-53-0

容量 価格（税別） 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 82 在庫あり
Solution
10 mM * 1 mL in DMSO USD 82 在庫あり
Solid
5 mg $75 在庫あり
10 mg $115 在庫あり
25 mg $200 在庫あり
50 mg $320 在庫あり
100 mg $480 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 1 publication(s) in Google Scholar

Other Forms of Tenalisib:

Tenalisib 関連抗体

Top Publications Citing Use of Products

PI3K アイソフォーム固有の製品をすべて表示:

すべてのアイソフォームを表示
PI3Kα PI3Kβ PI3Kγ PI3Kδ PI3KC2α PI3KC2β PI3KC2γ Vps34 PI3K PI3KC3 p120γ

  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Tenalisib (RP6530) is a novel, potent, and selective PI3Kδ and PI3Kγ inhibitor with IC50 values of 25 and 33 nM, respectively.

IC50 & Target[1]

PI3Kδ

25 nM (IC50)

PI3Kγ

33 nM (IC50)

体外実験

Tenalisib shows selectivity over PI3K α (>300-fold) and β (>100-fold) isoforms. Tenalisib exhibits modest proliferation inhibition (33-46% inhibition @ 10 μM) in both HEL-RS and HEL-RR cells. Addition of 10 μM tenalisib to ruxolitinib is synergistic resulting in a near-complete inhibition of proliferation (>90% for HEL-RS and >70% for HEL-RR). Addition of 5 μM tenalisib, 4 h prior to the addition of ruxolitinib results in a significant reduction in EC50of ruxolitinib (5.8 μM) in HEL-RR cells. Incubation of 10 μM tenalisib with ruxolitinib for 72 h increases the percent of apoptotic cells (55% in HEL-RS and 37% in HEL-RR) compared to either agent alone (16-27% in HEL-RS and 17-21% in HEL-RR)[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Tenalisib 関連抗体
体内実験

Tenalisib has been well tolerated in subjects with heavily pre-treated relapsed/refractory hematologic malignancies. Reported toxicities are manageable with no DLTs. Single agent activity is evident in difficult-to-treat subjects at ≥ 200 mg BID[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
臨床実験
分子量

415.42

分子式

C23H18FN5O2
CAS 番号
Appearance

Solid

Color

White to off-white

SMILES

O=C1C(C2=CC=CC(F)=C2)=C([C@@H](NC3=C4NC=NC4=NC=N3)CC)OC5=CC=CC=C15
輸送条件

Room temperature in continental US; may vary elsewhere.
保管条件
Powder -20°C 3 years
  4°C 2 years
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

DMSO : ≥ 100 mg/mL (240.72 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

*"≥" means soluble, but saturation unknown.

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.4072 mL 12.0360 mL 24.0720 mL
5 mM 0.4814 mL 2.4072 mL 4.8144 mL
10 mM 0.2407 mL 1.2036 mL 2.4072 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始）

C1

×
体積 （開始）

V1

=
濃度 （終了）

C2

×
体積 （終了）

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (6.02 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (6.02 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 98.83% ee.: 98.04%

COA (258 KB) HNMR (174 KB) LCMS (366 KB)

取扱説明書 (2659 KB)
参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.4072 mL 12.0360 mL 24.0720 mL 60.1801 mL
5 mM 0.4814 mL 2.4072 mL 4.8144 mL 12.0360 mL
10 mM 0.2407 mL 1.2036 mL 2.4072 mL 6.0180 mL
15 mM 0.1605 mL 0.8024 mL 1.6048 mL 4.0120 mL
20 mM 0.1204 mL 0.6018 mL 1.2036 mL 3.0090 mL
25 mM 0.0963 mL 0.4814 mL 0.9629 mL 2.4072 mL
30 mM 0.0802 mL 0.4012 mL 0.8024 mL 2.0060 mL
40 mM 0.0602 mL 0.3009 mL 0.6018 mL 1.5045 mL
50 mM 0.0481 mL 0.2407 mL 0.4814 mL 1.2036 mL
60 mM 0.0401 mL 0.2006 mL 0.4012 mL 1.0030 mL
80 mM 0.0301 mL 0.1505 mL 0.3009 mL 0.7523 mL
100 mM 0.0241 mL 0.1204 mL 0.2407 mL 0.6018 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Tenalisib Related Classifications

  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます：C1V1 = C2V2

濃度 （開始） × 体積 （開始） = 濃度 （終了） × 体積 （終了）
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Tenalisib1639417-53-0RP6530RP 6530RP-6530PI3KPhosphoinositide 3-kinaseInhibitorinhibitorinhibit

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

  

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

      

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Tenalisib
製品番号:
HY-17645
数量:
MCE 日本正規代理店:

カスタマーレビュー

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

製品名

  

Lot #

お名前 *

 

メールアドレス *

電話番号 *

 

部門 *

組纖名 *

 

国或いは地域 *

備考

Request for HNMR Report

We have received your request and will respond to you as soon as possible.