1. Epigenetics TGF-beta/Smad Stem Cell/Wnt PI3K/Akt/mTOR
  2. PKC GSK-3
  3. Bisindolylmaleimide I

Bisindolylmaleimide I  (Synonyms: ビスインドリルマレイミドI; GF109203X; Go 6850)

製品番号: HY-13867 純度: 98.15%
COA 取扱説明書 Technical Support

Bisindolylmaleimide I (GF109203X) is a cell-permeable and reversible PKC inhibitor (IC50 of 20 nM, 17 nM, 16 nM, and 20 nM for PKCα, PKCβI, PKCβII, and PKCγ. Bisindolylmaleimide I is also a GSK-3 inhibitor.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 133052-90-1

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 84 在庫あり
Solution
10 mM * 1 mL in DMSO USD 84 在庫あり
Solid
5 mg $77 在庫あり
10 mg $132 在庫あり
25 mg $264 在庫あり
50 mg $495 在庫あり
100 mg $666 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 40 publication(s) in Google Scholar

Other Forms of Bisindolylmaleimide I:

Top Publications Citing Use of Products

顧客検証

WB
Flow Cytometry
Cell Proliferation/Viability Assay
ELISA
Cell Imaging/Staining

    Bisindolylmaleimide I purchased from MedChemExpress. Usage Cited in: Neural Regen Res. 2025 Jul 1;20(7):2038-2052.  [Abstract]

    Cell viability was measured by cell counting kit-8 in MN9D cells with/without MPP+ 0.5 mM and Bisindolylmaleimide I (BIM) 5 µM treatment for 24 hours.

    Bisindolylmaleimide I purchased from MedChemExpress. Usage Cited in: Neural Regen Res. 2025 Jul 1;20(7):2038-2052.  [Abstract]

    C11-BODIPY fluorescence analysis suggested that MPP+ increased intracellular lipid peroxidation in MN9D cells, and that this effect was reversed by Bisindolylmaleimide I (BIM) (5 μM) treatment.

    Bisindolylmaleimide I purchased from MedChemExpress. Usage Cited in: Theranostics. 2021 Mar 11;11(11):5279-5295.  [Abstract]

    SH-SY5Y cells were simultaneously treated with C004019 (1 or 10 µM) and wortmainnin (WO, 1 µM) and Bisindolylmaleimide I (GF-109203X) (GFX, 1 µM) for 24 h to induce tau hyperphosphorylation, and then tau was measured by Western blotting.

    Bisindolylmaleimide I purchased from MedChemExpress. Usage Cited in: Mucosal Immunol. 2022 Feb;15(2):314-326.  [Abstract]

    Lung ILC2s were treated with vehicle or UCB (50 μM) and /or Honokiol (5 μM) and /or Bisindolylmaleimide I (BIM1) (5 μM) in the presence of IL-2, IL-7 and IL-33 for 48 h. Flow cytometric analysis of p-ERK1/2 levels was performed.

    Bisindolylmaleimide I purchased from MedChemExpress. Usage Cited in: Mucosal Immunol. 2022 Feb;15(2):314-326.  [Abstract]

    The amounts of IL-5 and IL-13 in the supernatants were measured by ELISA.

    PKC アイソフォーム固有の製品をすべて表示:

    GSK-3 アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Bisindolylmaleimide I (GF109203X) is a cell-permeable and reversible PKC inhibitor (IC50 of 20 nM, 17 nM, 16 nM, and 20 nM for PKCα, PKCβI, PKCβII, and PKCγ. Bisindolylmaleimide I is also a GSK-3 inhibitor[1][2][3].

    IC50 & Target[1]

    Bovine brain PKC

    10 nM (IC50)

    PKCβII

    16 nM (IC50)

    PKCβI

    17 nM (IC50)

    PKCα

    20 nM (IC50)

    PKCγ

    20 nM (IC50)

    FDGFR

    65 μM (IC50)

    Cellular Effect
    Cell Line Type Value Description References
    Platelet IC50
    760 nM
    Compound: 15; GF 109203X
    Inhibition of collagen induced human Platelet aggregation pre-incubated for 1 min followed by collagen stimulation and measured after 30 sec by aggregometer assay
    Inhibition of collagen induced human Platelet aggregation pre-incubated for 1 min followed by collagen stimulation and measured after 30 sec by aggregometer assay
    [PMID: 1874734]
    Platelet IC50
    875 nM
    Compound: 15; GF 109203X
    Inhibition of alpha-thrombin induced human Platelet aggregation pre-incubated for 1 min followed by alpha-thrombin stimulation and measured after 30 sec by aggregometer assay
    Inhibition of alpha-thrombin induced human Platelet aggregation pre-incubated for 1 min followed by alpha-thrombin stimulation and measured after 30 sec by aggregometer assay
    [PMID: 1874734]
    RAW264.7 IC50
    1.5 μM
    Compound: GF-109203X
    Protection against Bacillus anthracis lethal toxin-mediated cytotoxicity in mouse RAW264.7 cells assessed as change in viability after 24 hrs by WST1 dye reduction assay
    Protection against Bacillus anthracis lethal toxin-mediated cytotoxicity in mouse RAW264.7 cells assessed as change in viability after 24 hrs by WST1 dye reduction assay
    [PMID: 17485504]
    体外実験

    Bisindolylmaleimide I (5 μM) inhibits α-thrombin-induced P47 phosphorylation[1].
    Bisindolylmaleimide I (0-1 μM) inhibits DNA synthesis in quiescent swiss 3T3 cells[1].
    Bisindolylmaleimide I (5 μM) reduces GSK-3 activity to 25.1±4.3% in adipocytes lysates[3].
    Bisindolylmaleimide I (10 μM, 24 h) inhibits exosome and microvesicle (EMV) release from PC3 cells[4].
    Bisindolylmaleimide I (10 μM, 24 h) enhances cytotoxicity of 5-fluorouracil (HY-90006)[4].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    体内実験

    Bisindolylmaleimide I (0.02 mg/kg, i.p.) reduced the inceased NLRP3, P-PKCɑ, and PKCɑ levels in mechanical ventilation (MV) group in mice[5].
    Bisindolylmaleimide I (0-20 mg/kg, i.p.) reduces the mean frequency of Quinpirole-induced vomiting in shrews[6].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Model: Quinpirole-treated shrews[2]
    Dosage: 0-20 mg/kg
    Administration: i.p.
    Result: Reduced the mean frequency of Quinpirole-induced vomiting.
    Blocked Quinpirole-mediated ERK1/2 phosphorylation in shrew brainstems.
    分子量

    412.48

    分子式

    C25H24N4O2

    CAS 番号
    Appearance

    Solid

    Color

    Pink to red

    SMILES

    O=C(C(C1=CN(CCCN(C)C)C2=C1C=CC=C2)=C3C4=CNC5=C4C=CC=C5)NC3=O

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件

    4°C, protect from light

    *In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

    溶剤 & 溶解度
    体外: 

    DMSO : 10 mg/mL (24.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.4244 mL 12.1218 mL 24.2436 mL
    5 mM 0.4849 mL 2.4244 mL 4.8487 mL
    10 mM 0.2424 mL 1.2122 mL 2.4244 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months (protect from light). When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 1 mg/mL (2.42 mM); Clear solution

      This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

    *In solvent : -80°C, 1 year; -20°C, 6 months (protect from light)

    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months (protect from light). When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.4244 mL 12.1218 mL 24.2436 mL 60.6090 mL
    5 mM 0.4849 mL 2.4244 mL 4.8487 mL 12.1218 mL
    10 mM 0.2424 mL 1.2122 mL 2.4244 mL 6.0609 mL
    15 mM 0.1616 mL 0.8081 mL 1.6162 mL 4.0406 mL
    20 mM 0.1212 mL 0.6061 mL 1.2122 mL 3.0304 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Bisindolylmaleimide I
    製品番号:
    HY-13867
    数量:
    MCE 日本正規代理店: