2. PI3K/Akt/mTOR
  3. Akt PTEN PI3K
  4. SQLE-IN-1

SQLE-IN-1 (compound 19) is a squalene epoxidase (SQLE) inhibitor. SQLE-IN-1 inhibits the proliferation and migration of Huh7 cells. SQLE-IN-1 inhibits the cell cholesterol generation. SQLE-IN-1 increases the expression of PTEN and inhibits PI3K and AKT.

Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.

SQLE-IN-1

SQLE-IN-1 Chemische Struktur

CAS. Nr. : 1019169-83-5

Größe Preis Verfügbarkeit Menge
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 Auf Lager
Solution
10 mM * 1 mL in DMSO Auf Lager
Solid
5 mg Auf Lager
10 mg Auf Lager
25 mg Auf Lager
50 mg Auf Lager
100 mg Auf Lager
200 mg   Angebot einholen  
500 mg   Angebot einholen  

* Bitte wählen Sie Menge, bevor Sie Artikel hinzufügen.

This product is a controlled substance and not for sale in your territory.

Kundenbewertung

Based on 1 Customer Validation

SQLE-IN-1 Related Antibodies

Top Publications Citing Use of Products

Alle Akt Isoform-spezifische Produkte anzeigen:

Alle Isoformen anzeigen
Akt Akt1 Akt2 Akt3

Alle PI3K Isoform-spezifische Produkte anzeigen:

Alle Isoformen anzeigen
PI3Kα PI3Kβ PI3Kγ PI3Kδ PI3KC2α PI3KC2β PI3KC2γ Vps34 PI3K PI3KC3 p120γ

  • Biologische Aktivität

  • Reinheit & Dokumentation

  • Verweise

  • Kundenbewertung

Beschreibung

SQLE-IN-1 (compound 19) is a squalene epoxidase (SQLE) inhibitor. SQLE-IN-1 inhibits the proliferation and migration of Huh7 cells. SQLE-IN-1 inhibits the cell cholesterol generation. SQLE-IN-1 increases the expression of PTEN and inhibits PI3K and AKT[1].

Molekulargewicht

481.52

Formel

C24H21F2N5O2S
CAS. Nr.
Appearance

Solid

Color

White to light yellow

SMILES

O=S(C1=CC=C(F)C=C1F)(NC2=CC=C(NC3=NC(C)=NC(NC4=CC=C(C)C=C4)=C3)C=C2)=O
Versand

Room temperature in continental US; may vary elsewhere.
Speicherung
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
Lösungsmittel & Löslichkeit
In Vitro: 

DMSO : 100 mg/mL (207.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.0768 mL 10.3838 mL 20.7676 mL
5 mM 0.4154 mL 2.0768 mL 4.1535 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molaritätsrechner

  • Verdünnungsrechner

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (5.19 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (5.19 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation

Purity: 99.21%

SDS (252 KB)

COA (245 KB) HNMR (276 KB) LCMS (102 KB)

Handling Instructions (2659 KB)
Verweise

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.0768 mL 10.3838 mL 20.7676 mL 51.9189 mL
5 mM 0.4154 mL 2.0768 mL 4.1535 mL 10.3838 mL
10 mM 0.2077 mL 1.0384 mL 2.0768 mL 5.1919 mL
15 mM 0.1385 mL 0.6923 mL 1.3845 mL 3.4613 mL
20 mM 0.1038 mL 0.5192 mL 1.0384 mL 2.5959 mL
25 mM 0.0831 mL 0.4154 mL 0.8307 mL 2.0768 mL
30 mM 0.0692 mL 0.3461 mL 0.6923 mL 1.7306 mL
40 mM 0.0519 mL 0.2596 mL 0.5192 mL 1.2980 mL
50 mM 0.0415 mL 0.2077 mL 0.4154 mL 1.0384 mL
60 mM 0.0346 mL 0.1731 mL 0.3461 mL 0.8653 mL
80 mM 0.0260 mL 0.1298 mL 0.2596 mL 0.6490 mL
100 mM 0.0208 mL 0.1038 mL 0.2077 mL 0.5192 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

SQLE-IN-1 Related Classifications

Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

SQLE-IN-11019169-83-5AktPTENPI3KPKBProtein kinase BPhosphatase and tensin homologMMAC1Phosphoinositide 3-kinaseSQLEsqualene epoxidaseanti-liver cancerHuh7AKTInhibitorinhibitorinhibit

Ihre kürzlich angesehenen Produkte:

Online-Anfrage

Your information is safe with us. * Required Fields.

Produktname

  

Requested Quantity *

Name des Antragstellers *

 

Anrede

E-Mail-Addresse *

 

Telefonnummer *

Department

 

Name der Organisation *

City

Bundesland

Country or Region *

      

Bemerkungen

Massenanfrage

Inquiry Information

Produktname:
SQLE-IN-1
Art. -Nr.:
HY-160093
Menge:
MCE Japan Authorized Agent:

Kundenbewertung

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

Produktname

  

Lot #

Name des Antragstellers *

 

E-Mail-Addresse *

Telefonnummer

 

Department *

Name der Organisation *

 

Country or Region *

Bemerkungen

SAFETY DATA SHEET (SDS)

English - EN (252 KB) Français - FR (252 KB) Deutsch - DE (252 KB) Norwegian - NO (252 KB) Español - ES (252 KB) Swedish - SV (252 KB) Italian - IT (252 KB) Korean - KR (252 KB) Portuguese - PT (252 KB)

Request for HNMR Report

We have received your request and will respond to you as soon as possible.