1. MAPK/ERK Pathway PI3K/Akt/mTOR Autophagy Apoptosis
  2. JNK mTOR Akt PDK-1 Autophagy Apoptosis
  3. Polyphyllin I

Polyphyllin I is a bioactive constituent extracted from Paris polyphylla, has strong anti-tumor activity. Polyphyllin I is an activator of the JNK signaling pathway and is an inhibitor of PDK1/Akt/mTOR signaling. Polyphyllin I induces autophagy, G2/M phase arrest and apoptosis.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CAS 番号 : 50773-41-6

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 124 在庫あり
Solution
10 mM * 1 mL in DMSO USD 124 在庫あり
Solid
5 mg $66 在庫あり
10 mg $110 在庫あり
25 mg $200 在庫あり
50 mg $300 在庫あり
100 mg $480 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 5 publication(s) in Google Scholar

Other Forms of Polyphyllin I:

Top Publications Citing Use of Products

    Polyphyllin I purchased from MedChemExpress. Usage Cited in: FASEB J. 2020 Dec;34(12):16414-16431.  [Abstract]

    HEK293-T cells are co-transfected with pFUW vector and tau plasmids, or pFUW-CIP2A and tau plasmids, with or without Polyphyllin I (PPI; 0.5 or 1.0 μM) incubation for 48 h.

    JNK アイソフォーム固有の製品をすべて表示:

    mTOR アイソフォーム固有の製品をすべて表示:

    Akt アイソフォーム固有の製品をすべて表示:

    • 生物活性

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Polyphyllin I is a bioactive constituent extracted from Paris polyphylla, has strong anti-tumor activity. Polyphyllin I is an activator of the JNK signaling pathway and is an inhibitor of PDK1/Akt/mTOR signaling. Polyphyllin I induces autophagy, G2/M phase arrest and apoptosis[1][2][3].

    IC50 & Target

    JNK signaling[2]
    PDK1/Akt/mTOR signaling[3]

    Cellular Effect
    Cell Line Type Value Description References
    Bel-7402 IC50
    4.74 μM
    Compound: PPI
    Cytotoxicity against human Bel7402 cells after 24 hrs by MTT assay
    Cytotoxicity against human Bel7402 cells after 24 hrs by MTT assay
    [PMID: 27623551]
    HepG2 IC50
    4.01 μM
    Compound: PPI
    Cytotoxicity against human HepG2 cells after 24 hrs by MTT assay
    Cytotoxicity against human HepG2 cells after 24 hrs by MTT assay
    [PMID: 27623551]
    NCI-H1299 IC50
    < 1 μM
    Compound: PSI
    Cytotoxicity against human NCI-H1299 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    Cytotoxicity against human NCI-H1299 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    [PMID: 27721159]
    NCI-H446 IC50
    < 1 μM
    Compound: PSI
    Cytotoxicity against human NCI-H446 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    Cytotoxicity against human NCI-H446 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    [PMID: 27721159]
    NCI-H460 IC50
    < 1 μM
    Compound: PSI
    Cytotoxicity against human NCI-H460 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    Cytotoxicity against human NCI-H460 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    [PMID: 27721159]
    NCI-H520 IC50
    < 1 μM
    Compound: PSI
    Cytotoxicity against human NCI-H520 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    Cytotoxicity against human NCI-H520 cells assessed as reduction in cell viability after 48 hrs by MTT assay
    [PMID: 27721159]
    体外実験

    Polyphyllin I (0.625-10 mg/mL; 24-72 h) inhibits the proliferation of three non-small cell lung cancer (NSCLC) cell lines, with the IC50s of 1.24, 2.40, and 2.33 μg/ml for A549, H460, and SK-MES-1 cells, respectively[1].
    Polyphyllin I (2.5 mg/mL; 6-24 h) induces apoptosis of A549 cells[1].
    Polyphyllin I (0.25-2 μM; 24 h) increase in LC3-II expression and decrease in P62 expression in HGC-27 cells[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Cell Proliferation Assay[1]

    Cell Line: A549, H460, and SK-MES-1 cells[1]
    Concentration: 24, 48, 72 hours
    Incubation Time: 24, 48, 72 hours
    Result: Markedly reduced proliferation capacity in vitro and in a concentration-dependent manner.
    体内実験

    Polyphyllin I (1.5 mg/kg; i.p. twice daily from day 2 to day 11) significantly inhibit the tumor growth of A549 cells in the nude mice[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Model: BALB/c nude mice (5 weeks old) were s.c. inoculated with A549 cells[1]
    Dosage: 1.5 mg/kg
    Administration: I.p. twice daily from day 2 to day 11
    Result: The tumor growth rate was much lower than that in cisplatin group and PBS group.
    分子量

    855.02

    分子式

    C44H70O16

    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    C[C@H](CC1)CO[C@]21O[C@@]3([H])C[C@@]4([H])[C@@]5([H])[C@]([C@](CC[C@H](O[C@]6([H])O[C@H](CO)[C@@H](O[C@]7([H])O[C@@H](CO)[C@H](O)[C@H]7O)[C@H](O)[C@H]6O[C@@]8([H])[C@H](O)[C@H](O)[C@@H](O)[C@H](C)O8)C9)(C)C9=CC5)([H])CC[C@]4(C)[C@@]3([H])[C@@H]2C

    Structure Classification
    Initial Source
    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 100 mg/mL (116.96 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    H2O : < 0.1 mg/mL (insoluble)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.1696 mL 5.8478 mL 11.6956 mL
    5 mM 0.2339 mL 1.1696 mL 2.3391 mL
    10 mM 0.1170 mL 0.5848 mL 1.1696 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始)

    C1

    ×
    体積 (開始)

    V1

    =
    濃度 (終了)

    C2

    ×
    体積 (終了)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (2.92 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% Corn Oil

      Solubility: ≥ 2.5 mg/mL (2.92 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.91%

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 1.1696 mL 5.8478 mL 11.6956 mL 29.2391 mL
    5 mM 0.2339 mL 1.1696 mL 2.3391 mL 5.8478 mL
    10 mM 0.1170 mL 0.5848 mL 1.1696 mL 2.9239 mL
    15 mM 0.0780 mL 0.3899 mL 0.7797 mL 1.9493 mL
    20 mM 0.0585 mL 0.2924 mL 0.5848 mL 1.4620 mL
    25 mM 0.0468 mL 0.2339 mL 0.4678 mL 1.1696 mL
    30 mM 0.0390 mL 0.1949 mL 0.3899 mL 0.9746 mL
    40 mM 0.0292 mL 0.1462 mL 0.2924 mL 0.7310 mL
    50 mM 0.0234 mL 0.1170 mL 0.2339 mL 0.5848 mL
    60 mM 0.0195 mL 0.0975 mL 0.1949 mL 0.4873 mL
    80 mM 0.0146 mL 0.0731 mL 0.1462 mL 0.3655 mL
    100 mM 0.0117 mL 0.0585 mL 0.1170 mL 0.2924 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    質量   濃度   体積   分子量 *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    一般には略語で表示されます:C1V1 = C2V2

    濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    カスタマ需要量 *

    お名前 *

     

    タイトル

    メールアドレス *

     

    電話番号 *

    デパートメント

     

    組纖名 *

    市区町村

    都道府県

    国或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    備考

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Polyphyllin I
    製品番号:
    HY-N0047
    数量:
    MCE 日本正規代理店: