PrP (106-126)
Based on 1 Customer Validation
PrP (106-126) is a peptide corresponding to the prion protein (PrP) amyloidogenic region, and its biochemical properties resemble the infectious form of prion protein.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.59%
- CAS No.: 148439-49-0
- 화학식: C80H138N26O24S2
- 분자량:1912.30
-
보관:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
PrP (106-126) (100 μM) induces mTOR phosphorylation over time in N2a cells. PrP (106-126)-treated cells show significantly increased ROS production in comparison with that of PBS-treated control cells. Knockdown of PRAS40 enhances PrP (106-126)-induced apoptosis. PRAS40 alleviates PrP (106-126)-induced neuronal apoptosis via mTOR-AKT activation[1]. PrP (106-126) interacts selectively with porcine brain endothelial cells (PBEC) via their luminal side, and causes cumulative cell death, as shown by lactate dehydrogenase release, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide reduction, Caspase 3 induction and direct cell counting. In addition, PrP (106-126), but not its corresponding scrambled peptide, produces a 50% reduction of the trans-endothelial electrical resistance, while the PBEC maintained confluency[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 148439-49-0
-
Appearance Solid
-
분자량 1912.30
-
화학식 C80H138N26O24S2
-
Color White to off-white
-
Synonyms
Prion protein (106-126)
-
Sequence
Lys-Thr-Asn-Met-Lys-His-Met-Ala-Gly-Ala-Ala-Ala-Ala-Gly-Ala-Val-Val-Gly-Gly-Leu-Gly
-
Sequence Shortening
KTNMKHMAGAAAAGAVVGGLG
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
용액&용해도
DMSO : 50 mg/mL (26.15 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 1 mg/mL (0.52 mM; Need ultrasonic and warming)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (52.29 mM); Clear solution; Need ultrasonic
Protocol
The toxicity of PrP peptides is investigated on monolayers of PBEC. 100 000 PBEC/cm2 are seeded on 96 [for 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)] or 24-well plates [for lactate dehydrogenase (LDH)] pre-coated with rat tail collagen (27 μg/mL). The cell monolayers are treated with either PrP 106-126 wt or scr peptides. The PrP peptides are dissolved in double distilled water and then diluted in assay medium or in 5% newborn calf serum in Dulbecco-modified Earl's medium without phenol red. Treatment duration with the PrP peptides varies from 24 h to 48 h and the peptide concentration is set to 100 μM at which it exerts optimal effects as shown in a dose-dependent experiment. This concentration is also chosen as similar concentrations of PrP 106-126 found to exert in-vitro effects on astrocytes, neurons, microglia and leukocytes. The MTT assay, which measures mitochondrial metabolism, is based on the conversion of the water-soluble MTT dye [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] to an insoluble purple formazan. This formazan is then solubilized in pure dimethylsulfoxide, and its concentration determined by optical density (550/630 nm). The LDH cell death assay is done using the CytoTox 96® Assay kit. The released LDH in culture supernatants is measured with a 30-min coupled enzymatic assay which results in the conversion of a tetrazolium salt, 2-p-iodophenyl-3-p-nitro-phenyl-5-phenyl tetrazolium chloride (INT) into a red formazan product. The LDH levels are measured at the end of each treatment period. Thus, 50 μL of the medium is removed at the end of the treatment with PrP peptides and transferred to a new 96-well plate to which the other compounds are added. The plates are analyzed using an Elisa reader with the 490 nm filter.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yang W, et al. PRAS40 alleviates neurotoxic prion peptide-induced apoptosis via mTOR-AKT signaling. CNS Neurosci Ther. 2017 May;23(5):416-427. [Content Brief]
[2]. Cooper I, et al. Interactions of the prion peptide (PrP 106-126) with brain capillary endothelial cells: coordinated cell killing and remodeling of intercellular junctions. J Neurochem. 2011 Feb;116(4):467-75. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.5229 mL | 2.6147 mL | 5.2293 mL | 13.0733 mL |
| 5 mM | 0.1046 mL | 0.5229 mL | 1.0459 mL | 2.6147 mL | |
| 10 mM | 0.0523 mL | 0.2615 mL | 0.5229 mL | 1.3073 mL | |
| 15 mM | 0.0349 mL | 0.1743 mL | 0.3486 mL | 0.8716 mL | |
| 20 mM | 0.0261 mL | 0.1307 mL | 0.2615 mL | 0.6537 mL | |
| 25 mM | 0.0209 mL | 0.1046 mL | 0.2092 mL | 0.5229 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.