SB-649868
Based on 1 Customer Validation
SB-649868 is a potent and selective orally active orexin (OX) 1 and OX2 receptor antagonist (pKi =9.4 and 9.5 at the OX1 and OX2 receptor, respectively).
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.45%
- No. CAS: 380899-24-1
- Fòrmula: C26H24FN3O3S
- Peso molecular:477.55
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Neuronal Signaling Compound Library
HY-L013
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
-
Endocrinology Compound Library
HY-L047
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Ver todos los productos específicos de isoformas Orexin Receptor (OX Receptor)
More
Actividad biológica
pKi: 9.4 (OX1), 9.5 (OX2)[1]
SB-649868 is identified as one the most in vitro potent dual OX1 and OX2 receptor antagonist known at that time (pKi=9.4 and 9.5 at the OX1 and OX2 receptor, respectively) [1]. SB-649868 antagonizes orexin-A-induced inositol 1 phosphate (IP1) accumulation with the following pKB value (OX1=9.67; OX2=9.64). SB-649868 displaces the [3H]ACT-078573 receptor binding with the following pKi values: OX1=9.27; OX2=8.91. Increasing concentrations of SB-649868 (0.3 nM-30 nM) induces a rightward shift of the orexin-A CRCs with a depression of the agonist efficacy suggesting a clear non-surmountable behavior. The calculated apparent pKb values are 9.67±0.03 and 9.64±0.07 for OX1 and OX2[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 380899-24-1
-
Appearance Solid
-
Peso molecular 477.55
-
Fòrmula C26H24FN3O3S
-
Color White to off-white
-
SMILES
O=C(C1=C(C2=CC=C(F)C=C2)SC(C)=N1)N3CCCC[C@H]3CNC(C4=C(C=CO5)C5=CC=C4)=O
-
Synonyms
GSK649868
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvente y solubilidad
DMSO : 100 mg/mL (209.40 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Chinese Hamster Ovary (CHO) cells stably transfected with human OX1 orexin receptor are cultured in Dulbecco's modified Eagle's medium F12 Ham, supplemented with 10% fetal bovine serum (FBS), 2 mg/mL glutamine, 600 μg/ml geneticin at 37 °C in an atmosphere of 95% air and 5% CO2. CHO cells stably transfected with human OX2 orexin receptor are cultured in alpha-MEM supplemented with 10% FBS, 100 units/mL penicillin G, 100 units/mL streptomycin and 400 μg/mL geneticin, at 37 °C in an atmosphere of 95% air and 5% CO2. Accumulation of IP1 is measured using IP-One HTRF terbium cryptate-based assay. OX1-CHO cells are seeded into white 384-well plate at the cell density of 1×104 cells per well and cultured for 24 h in the presence of 5 mM sodium butyrate while OX2-CHO cells are seeded at the cell density of 4×104 cells per well and cultured for 24 h in culture medium. After washings Hank's Balanced Salt Solution (HBSS) at room temperature containing 20 mM HEPES pH 7.4, 50 mM, LiCl and 0.1% Bovine Serum Albumin (BSA) cells are pre-incubated for 45 min with antagonist and then treated with agonist for 60 min at 37 °C. Detection reagents, IP1-d2 tracer and anti-IP1-cryptate are diluted in lysis buffer and added to the cells. Following 60 min incubation at room temperature, time-resolved fluorescence at 615 nm and 665 nm are measured with Envision Multilabel flash lamp reader with 100 flashes and 400 μs integration time[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (279 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Di Fabio R, et al. Discovery process and pharmacological characterization of a novel dual orexin 1 and orexin 2receptor antagonist useful for treatment of sleep disorders. Bioorg Med Chem Lett. 2011 Sep 15;21(18):5562-7. [Content Brief]
[2]. Faedo S, et al. Functional and binding kinetic studies make a distinction between OX1 and OX2 orexin receptorantagonists. Eur J Pharmacol. 2012 Oct 5;692(1-3):1-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0940 mL | 10.4701 mL | 20.9402 mL | 52.3505 mL |
| 5 mM | 0.4188 mL | 2.0940 mL | 4.1880 mL | 10.4701 mL | |
| 10 mM | 0.2094 mL | 1.0470 mL | 2.0940 mL | 5.2351 mL | |
| 15 mM | 0.1396 mL | 0.6980 mL | 1.3960 mL | 3.4900 mL | |
| 20 mM | 0.1047 mL | 0.5235 mL | 1.0470 mL | 2.6175 mL | |
| 25 mM | 0.0838 mL | 0.4188 mL | 0.8376 mL | 2.0940 mL | |
| 30 mM | 0.0698 mL | 0.3490 mL | 0.6980 mL | 1.7450 mL | |
| 40 mM | 0.0524 mL | 0.2618 mL | 0.5235 mL | 1.3088 mL | |
| 50 mM | 0.0419 mL | 0.2094 mL | 0.4188 mL | 1.0470 mL | |
| 60 mM | 0.0349 mL | 0.1745 mL | 0.3490 mL | 0.8725 mL | |
| 80 mM | 0.0262 mL | 0.1309 mL | 0.2618 mL | 0.6544 mL | |
| 100 mM | 0.0209 mL | 0.1047 mL | 0.2094 mL | 0.5235 mL |
SB-649868 Related Classifications
HY-10806 Related Classifications
Powered by Bioz