RIPK1-IN-4
Based on 1 Customer Validation
RIPK1-IN-4 (compound 8) is a potent and selective type II kinase inhibitor of receptor interacting protein 1 (RIP1) kinase and binds to a DLG-out inactive form of RIP1 with an IC50s of 16 nM and 10 nM for RIP1 and ADP-Glo kinase.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.89%
- CAS No.: 1481641-08-0
- Formule: C23H23N5O2
- Masse moléculaire:401.46
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Immunology/Inflammation Compound Library
HY-L007
-
Kinase Inhibitor Library
HY-L009
-
NF-κB Signaling Compound Library
HY-L014
-
Protein-protein Interaction Inhibitor Library
HY-L109
-
Highly Selective Inhibitors Library
HY-L158
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Activité biologique
|
RIPK1 |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| L929 | IC50 |
0.4 μM
Compound: 3
|
Inhibition of mouse RIP1 in mouse L929 cells assessed as inhibition of TNF/zVAD.fmk induced necroptosis by Cell titer-Glo luminescence assay
Inhibition of mouse RIP1 in mouse L929 cells assessed as inhibition of TNF/zVAD.fmk induced necroptosis by Cell titer-Glo luminescence assay
|
[PMID: 26854747] |
| Sf9 | IC50 |
0.01 μM
Compound: 8
|
Inhibition of human N-terminal His-GST-TEV-fused RIP1 kinase domain (1 to 375) autophosphorylation expressed in baculovirus infected insect Sf9 cells after 4 hrs by ADP-Glo luminescence assay
Inhibition of human N-terminal His-GST-TEV-fused RIP1 kinase domain (1 to 375) autophosphorylation expressed in baculovirus infected insect Sf9 cells after 4 hrs by ADP-Glo luminescence assay
|
[PMID: 24900635] |
| Sf9 | IC50 |
0.016 μM
Compound: 8
|
Displacement of (14-(2-{[3-({2-{[4-(cyanomethyl)phenyl]amino}-6-[(5-cyclopropyl-1H-pyrazol-3-yl)amino]-4-pyrimidinyl}amino)propyl]amino}-2-oxoethyl)-16,16,18,18-tetramethyl-6,7,7a,8a,9,10,16,18-octahydrobenzo[2'',3'']indolizino[8'',7'':5',6']pyrano[3',2':
Displacement of (14-(2-{[3-({2-{[4-(cyanomethyl)phenyl]amino}-6-[(5-cyclopropyl-1H-pyrazol-3-yl)amino]-4-pyrimidinyl}amino)propyl]amino}-2-oxoethyl)-16,16,18,18-tetramethyl-6,7,7a,8a,9,10,16,18-octahydrobenzo[2'',3'']indolizino[8'',7'':5',6']pyrano[3',2':
|
[PMID: 24900635] |
| U-937 | IC50 |
0.5 μM
Compound: 3
|
Inhibition of human RIP1 in human U937 cells assessed as inhibition of TNF/zVAD.fmk induced necroptosis after 24 hrs by Cell titer-Glo luminescence assay
Inhibition of human RIP1 in human U937 cells assessed as inhibition of TNF/zVAD.fmk induced necroptosis after 24 hrs by Cell titer-Glo luminescence assay
|
[PMID: 26854747] |
| U-937 | IC50 |
0.63 μM
Compound: 8
|
Inhibition of RIP1 in human U937 cells assessed as prevention of TNFalpha/zVAD.fmk-induced necrotic cell death preincubated for 30 to 60 mins followed by TNF-alpha induction measured after overnight incubation by Cell Titer-Glo luminescence assay
Inhibition of RIP1 in human U937 cells assessed as prevention of TNFalpha/zVAD.fmk-induced necrotic cell death preincubated for 30 to 60 mins followed by TNF-alpha induction measured after overnight incubation by Cell Titer-Glo luminescence assay
|
[PMID: 24900635] |
Chemical Information
-
CAS No. 1481641-08-0
-
Appearance Solid
-
Masse moléculaire 401.46
-
Formule C23H23N5O2
-
Color White to off-white
-
SMILES
CC(C)(C1=CC(NC(NC2=CC=C(C3=CC=CC4=C3C=CN=C4N)C=C2)=O)=NO1)C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 250 mg/mL (622.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.44 mg/mL (3.59 mM); Clear solution
This protocol yields a clear solution of ≥ 1.44 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (14.4 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4909 mL | 12.4545 mL | 24.9091 mL | 62.2727 mL |
| 5 mM | 0.4982 mL | 2.4909 mL | 4.9818 mL | 12.4545 mL | |
| 10 mM | 0.2491 mL | 1.2455 mL | 2.4909 mL | 6.2273 mL | |
| 15 mM | 0.1661 mL | 0.8303 mL | 1.6606 mL | 4.1515 mL | |
| 20 mM | 0.1245 mL | 0.6227 mL | 1.2455 mL | 3.1136 mL | |
| 25 mM | 0.0996 mL | 0.4982 mL | 0.9964 mL | 2.4909 mL | |
| 30 mM | 0.0830 mL | 0.4152 mL | 0.8303 mL | 2.0758 mL | |
| 40 mM | 0.0623 mL | 0.3114 mL | 0.6227 mL | 1.5568 mL | |
| 50 mM | 0.0498 mL | 0.2491 mL | 0.4982 mL | 1.2455 mL | |
| 60 mM | 0.0415 mL | 0.2076 mL | 0.4152 mL | 1.0379 mL | |
| 80 mM | 0.0311 mL | 0.1557 mL | 0.3114 mL | 0.7784 mL | |
| 100 mM | 0.0249 mL | 0.1245 mL | 0.2491 mL | 0.6227 mL |
RIPK1-IN-4 Related Classifications
HY-18901 Related Classifications
Powered by Bioz