Guvacine hydrobromide
Based on 1 publication(s) in Google Scholar
Guvacine hydrobromide, an alkaloid found in the nut of Areca catechu, is a potent GABA uptakp inhibitor. Guvacine hydrobromide inhibits rat GAT-1, rat GAT-2 and rat GAT-3 with IC50 values of 39 μM, 58 μM and 378 μM, respectively.
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 6027-92-5
- Formula: C6H10BrNO2
- Molecular Weight:208.05
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) Guvacine hydrobromide
More
Biological Activity
IC50: 39 μM (rat GAT-1), 58 μM (rat GAT-2), 378 μM (rat GAT-3), 14 μM (human GAT-1), 119 μM (huam GAT-3) and 1870 μM (human BGT-3)[1]
Chemical Information
-
CAS No. 6027-92-5
-
Appearance Solid
-
Molecular Weight 208.05
-
Formula C6H10BrNO2
-
Color White to off-white
-
SMILES
O=C(C1=CCCNC1)O.[H]Br
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Commun Biol
RBAP48 facilitates the oral squamous cell carcinoma process in an androgen receptor-dependent and independent manners. [Abstract]2025 May 30;8(1):829. PMID: 40442479
Solvent & Solubility
DMSO : 50 mg/mL (240.33 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 25 mg/mL (120.16 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 4.8065 mL | 24.0327 mL | 48.0654 mL | 120.1634 mL |
| 5 mM | 0.9613 mL | 4.8065 mL | 9.6131 mL | 24.0327 mL | |
| 10 mM | 0.4807 mL | 2.4033 mL | 4.8065 mL | 12.0163 mL | |
| 15 mM | 0.3204 mL | 1.6022 mL | 3.2044 mL | 8.0109 mL | |
| 20 mM | 0.2403 mL | 1.2016 mL | 2.4033 mL | 6.0082 mL | |
| 25 mM | 0.1923 mL | 0.9613 mL | 1.9226 mL | 4.8065 mL | |
| 30 mM | 0.1602 mL | 0.8011 mL | 1.6022 mL | 4.0054 mL | |
| 40 mM | 0.1202 mL | 0.6008 mL | 1.2016 mL | 3.0041 mL | |
| 50 mM | 0.0961 mL | 0.4807 mL | 0.9613 mL | 2.4033 mL | |
| 60 mM | 0.0801 mL | 0.4005 mL | 0.8011 mL | 2.0027 mL | |
| 80 mM | 0.0601 mL | 0.3004 mL | 0.6008 mL | 1.5020 mL | |
| 100 mM | 0.0481 mL | 0.2403 mL | 0.4807 mL | 1.2016 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.