1. GPCR/G Protein
  2. Cannabinoid Receptor

AM630 

Cat. No.: HY-15421 Purity: 99.35%
Handling Instructions

AM630 is a selective CB2 antagonist with Ki of 31.2 nM, and displays 165-fold selectivity over CB1 receptors.

For research use only. We do not sell to patients.

AM630 Chemical Structure

AM630 Chemical Structure

CAS No. : 164178-33-0

Size Price Stock Quantity
Free Sample (0.5-1 mg)   Apply now  
10 mM * 1 mL in DMSO USD 99 In-stock
Estimated Time of Arrival: December 31
10 mg USD 90 In-stock
Estimated Time of Arrival: December 31
50 mg USD 354 In-stock
Estimated Time of Arrival: December 31
100 mg USD 654 In-stock
Estimated Time of Arrival: December 31
200 mg   Get quote  
500 mg   Get quote  

* Please select Quantity before adding items.

    AM630 purchased from MCE. Usage Cited in: Eur J Pain. 2017 May;21(5):804-814.

    The SCS1 (early SCS)-mediated increase in the ipsilateral:contralateral PWT ratio (compared to pre-SCS) is significantly reduced by the opioid receptor antagonist, Naloxone, which is administered 10 min before SCS1.
    • Biological Activity

    • Protocol

    • Technical Information

    • Purity & Documentation

    • References

    Description

    AM630 is a selective CB2 antagonist with Ki of 31.2 nM, and displays 165-fold selectivity over CB1 receptors.

    IC50 & Target

    Ki: 31.2 nM (CB2)

    In Vitro

    The AM251 and AM630-evoked Ca2+ influxes into TG sensory neurons aere concentration-dependent, and fitted. The EC50 for AM251 and AM630 are 7.37 μM and 15.6 μM, respectively. AM251 and AM630 activate TRPA1 in TG sensory neurons. AM630 is comparable in value in both TRPA1 and TRPV1/TRPA1 expressing CHO cells (2 and 4.6 μM, respectively). AM251 and AM630 activation of TRPA1 is modulated by TRPV1[2]. AM630 (0, 50, 100, and 200 nM) is not toxic to RAW264.7 cells. AM630 (100 nM) substantially inhibits osteoclastogenesis in cultures with RANKL and Ti particles in a dose-dependent manner[3]. AM630 (1 μM) blocks the CP-55,940 dose response with EC50 of 170 nM at human and EC50 of 110 nM at rat cannabinoid CB2 receptor[4].

    In Vivo

    AM630 (2, 3 mg/kg, i.p.) significantly reduces the time spent in the light box compared with vehicle group. AM630 increases anxiety since the time spent in the light box is reduced compared with its corresponding control group. AM630 (1, 2 or 3 mg/kg, i.p., twice a day) produces a significant anxiolytic effect, increasing the time spent in the light box at all of the doses used[1]

    Solvent & Solubility
    In Vitro: 

    10 mM in DMSO

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.9827 mL 9.9136 mL 19.8271 mL
    5 mM 0.3965 mL 1.9827 mL 3.9654 mL
    10 mM 0.1983 mL 0.9914 mL 1.9827 mL
    *Please refer to the solubility information to select the appropriate solvent.
    In Vivo:
    • 1.

      AM630 is made up in a vehicle of 2% dimethylformamide (aqueous)[5].

    References
    Kinase Assay
    [4]

    HEK cells stabLy expressing human or rat cannabinoid CB2 receptors are grown until a confLuent monoLayer is formed. The ceLLs are harvested and homogenized in Tris-EDTA (TE) buffer (50 mM Tris-HCl, pH 7.4, 1 mM MgCl2, and 1 mM EDTA) using a poLytron for 2×10 s bursts in the presence of protease inhibitors, followed by centrifugation at 45,000×g for 20 min. The final membrane pellet is re-homogenized in storage buffer (50 mM Tris-HCl, pH 7.4, 1 mM MgCl2, and 1 mM EDTA and 10% sucrose) and frozen at −80°C until used. Saturation binding reactions are initiated by the addition of membrane preparation (protein concentration of 5 μg/well for the human CB2and 20 μg/well for the rat CB2) into wells of a deep-well pLate containing ([3H]CP-55,940 (120 Ci/mmol)) in assay buffer (50 mM Tris-HCl, pH 7.4, 2.5 mM EDTA, 5 mM MgCl2, and 0.5 mg/mL fatty acid-free bovine aLbumin serum). After incubation at 30°C for 90 min, binding reaction is terminated by the addition of 300 μL/well of coLd assay buffer followed by rapid vacuum filtration through a UniFilter-96 GF/C filter pLates (pre-soaked in 1 mg/mL bovine serum aLbumin for 2 h). The bound activity is counted in a TopCount using Microscint-20. In some experiments with endogenous ligands, experiments are performed in the presence of AEBSF (50 μM). Saturation experiments are conducted with 12 concentrations of [3H]CP-55,940 ranging from 0.01 to 8 nM. Competition experiments are conducted with 0.5 nM [3H]CP-55,940 and five concentrations (1 nM to 10 μM) of displacing Ligands. Nonspecific binding is defined by the addition of 10 μM unLabeLed CP-55,940 in both saturation and competition binding assays. Kd vaLues from saturation binding assays and Ki vaLues from the competition binding assays are determined with one site binding or one site competition curve fitting equations using Prism software.

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    Cell Assay
    [3]

    The effect of AM630 and Ti particles on RAW cell viability is examined using the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazoliumbromide (MTT) assay. RAW 264.7 (1×103 cells/well) is cultured in the presence of AM630 (0, 50, 100, and 200 nM) for 24, 48, and 72 h, with or without Ti particles, and then incubated with MTT (0.5 mg/mL) at 37°C for 2 h. The culture medium is then replaced with equal volumes of DMSO to dissolve formazan crystals, followed by shaking at room temperature for 10 min. Absorbance at 490 nm is measured using a microplate reader.

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    References
    Molecular Weight

    504.36

    Formula

    C₂₃H₂₅IN₂O₃

    CAS No.

    164178-33-0

    SMILES

    O=C(C1=C(C)N(CCN2CCOCC2)C3=C1C=CC(I)=C3)C4=CC=C(OC)C=C4

    Storage
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    Shipping

    Room temperature in continental US; may vary elsewhere

    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2

    Inquiry Online

    Your information is safe with us. * Required Fields.

    Product name

     

    Salutation

    Applicant name *

     

    Email address *

    Phone number *

     

    Organization name *

    Country or Region *

     

    Requested quantity *

    Remarks

    Bulk Inquiry

    Inquiry Information

    Product Name:
    AM630
    Cat. No.:
    HY-15421
    Quantity:

    AM630

    Cat. No.: HY-15421