GPR120 modulator 1
GPR120 modulator 1 is a G protein coupled receptor 120 (GPR120) modulator extracted from patent US8394841B2, compound example F1. GPR120 modulator 1 can be used for the research of diseases associated with abnormal or deregulated GPR120, such as diabetes.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.06%
- CAS. Nr.: 1050506-75-6
- Formel: C19H16ClNO4S
- Molecular Weight:389.85
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biologische Aktivität
GPR120[1]
Chemical Information
-
CAS. Nr. 1050506-75-6
-
Appearance Solid
-
Molecular Weight 389.85
-
Formel C19H16ClNO4S
-
Color White to off-white
-
SMILES
O=C(O)COC1=CC=C(OCC2=NC(C3=CC=CC=C3Cl)=CS2)C=C1C
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Lösungsmittel & Löslichkeit
DMSO : ≥ 100 mg/mL (256.51 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5651 mL | 12.8254 mL | 25.6509 mL | 64.1272 mL |
| 5 mM | 0.5130 mL | 2.5651 mL | 5.1302 mL | 12.8254 mL | |
| 10 mM | 0.2565 mL | 1.2825 mL | 2.5651 mL | 6.4127 mL | |
| 15 mM | 0.1710 mL | 0.8550 mL | 1.7101 mL | 4.2751 mL | |
| 20 mM | 0.1283 mL | 0.6413 mL | 1.2825 mL | 3.2064 mL | |
| 25 mM | 0.1026 mL | 0.5130 mL | 1.0260 mL | 2.5651 mL | |
| 30 mM | 0.0855 mL | 0.4275 mL | 0.8550 mL | 2.1376 mL | |
| 40 mM | 0.0641 mL | 0.3206 mL | 0.6413 mL | 1.6032 mL | |
| 50 mM | 0.0513 mL | 0.2565 mL | 0.5130 mL | 1.2825 mL | |
| 60 mM | 0.0428 mL | 0.2138 mL | 0.4275 mL | 1.0688 mL | |
| 80 mM | 0.0321 mL | 0.1603 mL | 0.3206 mL | 0.8016 mL | |
| 100 mM | 0.0257 mL | 0.1283 mL | 0.2565 mL | 0.6413 mL |