BN82002 hydrochloride
Based on 1 publication(s) in Google Scholar
BN82002 hydrochloride is a potent, selective and irreversible inhibitor of CDC25 phosphatase family. BN82002 hydrochloride inhibits CDC25A, CDC25B2, CDC25B3, CDC25C CDC25A, and 25C-cat with IC50 values of 2.4, 3.9, 6.3, 5.4, and 4.6 µM, respectively. BN82002 hydrochloride displays ~20-fold greater selectivity over CD45 tyrosine phosphatase.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.36%
- CAS No.: 1049740-43-3
- Formule: C19H26ClN3O4
- Masse moléculaire:395.88
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Phosphatase Inhibitor Library
HY-L081
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) BN82002 hydrochloride
More
Activité biologique
IC50: 2.4 μM (CDC25A), 3.9 μM (CDC25B2), 6.3 μM (CDC25B3), 5.4 μM (CDC25C), 4.6 μM (CDC25C-cat)[1].
The effect of BN82002 on cell proliferation is evaluated in vitro on several human tumor cell lines. Menadione, which has been reported to inhibit cell proliferation, is used as a control. All of the examined cell lines are sensitive to BN82002 and Menadione in a concentration-dependent manner in the low micromolar range. The most sensitive is the pancreatic cancer cell line MIA PaCa-2 with an IC50 of 7.2 μM, and the less sensitive cell line is the colon cancer HT-29 with an IC50 of 32.6 μM. The range of activity is very similar to the one observed with menadione (5-15 μM). It is also showed that 50 μM BN82002 is a concentration that fully inhibits cell proliferation, the cell cycle distribution is only modestly affected with a slight decrease in S phase and an increase in cells containing both a G1 and a G2 DNA content, suggesting that the cells treated with BN82002 are arrested at various stages of the cell cycle[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1049740-43-3
-
Appearance Solid-Liquid Mixture
-
Masse moléculaire 395.88
-
Formule C19H26ClN3O4
-
Color Brown to orange
-
SMILES
O=[N+]([O-])C1=CC=C(CCN(CC2=CC(N(C)C)=CC(OC)=C2O)C)C=C1.Cl
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
PLoS Genet
Subunit P60 of phosphatidylinositol 3-kinase promotes cell proliferation or apoptosis depending on its phosphorylation status. [Abstract]2021 Apr 26;17(4):e1009514. PMID: 33901186
Solvant et solubilité
DMSO : 220 mg/mL (555.72 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5.5 mg/mL (13.89 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5.5 mg/mL (13.89 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5260 mL | 12.6301 mL | 25.2602 mL | 63.1504 mL |
| 5 mM | 0.5052 mL | 2.5260 mL | 5.0520 mL | 12.6301 mL | |
| 10 mM | 0.2526 mL | 1.2630 mL | 2.5260 mL | 6.3150 mL | |
| 15 mM | 0.1684 mL | 0.8420 mL | 1.6840 mL | 4.2100 mL | |
| 20 mM | 0.1263 mL | 0.6315 mL | 1.2630 mL | 3.1575 mL | |
| 25 mM | 0.1010 mL | 0.5052 mL | 1.0104 mL | 2.5260 mL | |
| 30 mM | 0.0842 mL | 0.4210 mL | 0.8420 mL | 2.1050 mL | |
| 40 mM | 0.0632 mL | 0.3158 mL | 0.6315 mL | 1.5788 mL | |
| 50 mM | 0.0505 mL | 0.2526 mL | 0.5052 mL | 1.2630 mL | |
| 60 mM | 0.0421 mL | 0.2105 mL | 0.4210 mL | 1.0525 mL | |
| 80 mM | 0.0316 mL | 0.1579 mL | 0.3158 mL | 0.7894 mL | |
| 100 mM | 0.0253 mL | 0.1263 mL | 0.2526 mL | 0.6315 mL |
Powered by Bioz