RAS inhibitor Abd-7
Based on 3 publication(s) in Google Scholar
RAS inhibitor Abd-7, a potent RAS-binding compound (Kd=51 nM), is a RAS-effector protein-protein interaction (PPI) inhibitor. RAS inhibitor Abd-7 interacts with RAS inside the cells, prevents RAS-effector interactions and inhibits endogenous RAS-dependent signaling. RAS inhibitor Abd-7 impairs the PPI of various mutant KRAS proteins with PI3K, CRAF and RALGDS as well as NRAS Q61H and HRAS G12V.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.57%
- CAS. Nr.: 2351843-48-4
- Formel: C23H25N3O3
- Molecular Weight:391.46
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) RAS inhibitor Abd-7
More
Biologische Aktivität
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| DLD-1 | IC50 |
8 μM
Compound: 39; Abd-7
|
Antiproliferative activity against human DLD-1 cells harboring KRAS G13D mutant incubated for 72 hrs by CellTitreGlo assay
Antiproliferative activity against human DLD-1 cells harboring KRAS G13D mutant incubated for 72 hrs by CellTitreGlo assay
|
[PMID: 33225706] |
| DLD-1 | IC50 |
8 μM
Compound: Abd-7
|
Cytotoxicity against human DLD-1 cells harboring KRAS G13D mutant assessed as inhibition of cell growth incubated for 72 hrs by celltiter-glo luminescent cell viability assay
Cytotoxicity against human DLD-1 cells harboring KRAS G13D mutant assessed as inhibition of cell growth incubated for 72 hrs by celltiter-glo luminescent cell viability assay
|
[PMID: 34520956] |
| HT-1080 | IC50 |
10 μM
Compound: Abd-7
|
Cytotoxicity against human HT-1080 cells harboring NRAS Q61K mutant assessed as inhibition of cell growth incubated for 72 hrs by celltiter-glo luminescent cell viability assay
Cytotoxicity against human HT-1080 cells harboring NRAS Q61K mutant assessed as inhibition of cell growth incubated for 72 hrs by celltiter-glo luminescent cell viability assay
|
[PMID: 34520956] |
RAS inhibitor Abd-7 (0-20 μM; 24-48 hours) is a cell-potent inhibitor affecting the viability of cancer cell lines in a single digit to low micromolar range[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:DLD-1 cells, HT1080 cells
-
Concentration:0-20 μM
-
Incubation Time:24-48 hours
-
Result:The IC50 of 8 μM in DLD-1 and 10 μM in HT1080 at 72 h (similar values for the IC50 were found after 48 h).
Chemical Information
-
CAS. Nr. 2351843-48-4
-
Appearance Solid
-
Molecular Weight 391.46
-
Formel C23H25N3O3
-
Color Off-white to light yellow
-
SMILES
COC1=NC(C2=C3C(OCCO3)=CC=C2)=CC=C1NC4=CC=C(CN(C)C)C=C4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Cell Mol Immunol
Chaperone- and PTM-mediated activation of IRF1 tames radiation-induced cell death and the inflammatory response. [Abstract]2024 Aug;21(8):856-872. PMID: 38849539 -
Int J Oral Sci
Blockade of PD-L1/PD-1 signaling promotes osteo-/odontogenic differentiation through Ras activation. [Abstract]2022 Apr 1;14(1):18. PMID: 35365595 -
iScience
FAM65A, as a potential predictor of prognosis, promotes colorectal cancer progression via activating Ras/ERK/RSK signaling. [Abstract]2026 Jan 10;29(2):114662. PMID: 41660236
Lösungsmittel & Löslichkeit
DMSO : 125 mg/mL (319.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.08 mg/mL (5.31 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5545 mL | 12.7727 mL | 25.5454 mL | 63.8635 mL |
| 5 mM | 0.5109 mL | 2.5545 mL | 5.1091 mL | 12.7727 mL | |
| 10 mM | 0.2555 mL | 1.2773 mL | 2.5545 mL | 6.3863 mL | |
| 15 mM | 0.1703 mL | 0.8515 mL | 1.7030 mL | 4.2576 mL | |
| 20 mM | 0.1277 mL | 0.6386 mL | 1.2773 mL | 3.1932 mL | |
| 25 mM | 0.1022 mL | 0.5109 mL | 1.0218 mL | 2.5545 mL | |
| 30 mM | 0.0852 mL | 0.4258 mL | 0.8515 mL | 2.1288 mL | |
| 40 mM | 0.0639 mL | 0.3193 mL | 0.6386 mL | 1.5966 mL | |
| 50 mM | 0.0511 mL | 0.2555 mL | 0.5109 mL | 1.2773 mL | |
| 60 mM | 0.0426 mL | 0.2129 mL | 0.4258 mL | 1.0644 mL | |
| 80 mM | 0.0319 mL | 0.1597 mL | 0.3193 mL | 0.7983 mL | |
| 100 mM | 0.0255 mL | 0.1277 mL | 0.2555 mL | 0.6386 mL |