4-Methoxybenzaldehyde
Based on 1 Customer Validation
4-Methoxybenzaldehyde (p-anisaldehyde) is a fragrant phenolic compound. 4-Methoxybenzaldehyde has been found in many plant species including horseradish, anise, star anise. 4-Methoxybenzaldehyde is a possible neurotoxicant and it has shown effects that include mortality, attractancy, and interference with host seeking .
For research use only. We do not sell to patients.
- Purity: 99.67%
- CAS No.: 123-11-5
- Formula: C8H8O2
- Molecular Weight:136.15
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Endogenous Metabolite Isoforms
More
Biological Activity
|
Human Endogenous Metabolite |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| B16-F10 | IC50 |
70.74 μM
Compound: 15-2
|
Cytotoxicity against mouse B16F10 cells assessed as reduction in cell viability
Cytotoxicity against mouse B16F10 cells assessed as reduction in cell viability
|
[PMID: 30594028] |
4-Methoxybenzaldehyde (p-anisaldehyde) (0.00001%-0.00003%, 24 h) is lethal to horn fly eggs at concentrations of 0.00001%, and possibly less[1]. 4-Methoxybenzaldehyde (0.125%- 10%, 30 min-4 h) causes relatively high immobilization for the first hour and a decline by 2 h, reaching low levels at the 4 h sampling time at the 1, 1.5, 2, and 2.5% concentrations. Don’t induce immobilization at any of the five sampling times at the three low concentrations (0.125, 0.25, and 0.5%) and the three highest concentrations (5, 7.5, and 10%)[1]. 4-Methoxybenzaldehyde (0.125%- 10%, 30 min-4 h) causes mortality of 90–100% at each sampling time in the 5, 7.5, and 10% concentration treatments. 4-Methoxybenzaldehyde causes mortality of ≈69% (2 and 2.5%) and ≈30% (1 and 1.5%) by 4 h. 4-Methoxybenzaldehyde has no effect at any of the sampling times at the three lowest concentrations (0.125, 0.25, and 0.5%)[1]. 4-Methoxybenzaldehyde (1000-20000 ppm, 1 week) reduces horn fly larvae by 85.4%-100% when mixed into cow manure at 5000-20,000 ppm. 4-Methoxybenzaldehyde reduces pupation by 57.6 and 79.9% at the 1% and 5% concentrations, respectively. 4-Methoxybenzaldehyde doesn’t occur pupation in the 10, 25, and 50% concentration treatments[1]. 4-Methoxybenzaldehyde (0.075%- 1.5%, 30 min-4 h) achieves complete horn fly mortality by fumigation with 0.75% by 3 h in an enclosed space, and fumigation is more (≈12.5-fold) lethal to adult horn flies than sprayed droplets[1]. 4-Methoxybenzaldehyde (0.3%- 10%, 30 min-120 min) completely deters feeding from cotton pads soaked in bovine blood in response to concentrations of 0.6% and greater in ventilated containers[1]. 4-Methoxybenzaldehyde (0.06%- 1%, 40 h) doesn’t affect horn fly egg production and hatching with exposure to sublethal concentrations[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 123-11-5
-
Appearance Liquid (Density: 1.121 g/cm3)
-
Molecular Weight 136.15
-
Formula C8H8O2
-
Color Colorless to light yellow
-
SMILES
O=CC1=CC=C(OC)C=C1
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (734.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (18.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (18.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.3448 mL | 36.7242 mL | 73.4484 mL | 183.6210 mL |
| 5 mM | 1.4690 mL | 7.3448 mL | 14.6897 mL | 36.7242 mL | |
| 10 mM | 0.7345 mL | 3.6724 mL | 7.3448 mL | 18.3621 mL | |
| 15 mM | 0.4897 mL | 2.4483 mL | 4.8966 mL | 12.2414 mL | |
| 20 mM | 0.3672 mL | 1.8362 mL | 3.6724 mL | 9.1811 mL | |
| 25 mM | 0.2938 mL | 1.4690 mL | 2.9379 mL | 7.3448 mL | |
| 30 mM | 0.2448 mL | 1.2241 mL | 2.4483 mL | 6.1207 mL | |
| 40 mM | 0.1836 mL | 0.9181 mL | 1.8362 mL | 4.5905 mL | |
| 50 mM | 0.1469 mL | 0.7345 mL | 1.4690 mL | 3.6724 mL | |
| 60 mM | 0.1224 mL | 0.6121 mL | 1.2241 mL | 3.0604 mL | |
| 80 mM | 0.0918 mL | 0.4591 mL | 0.9181 mL | 2.2953 mL | |
| 100 mM | 0.0734 mL | 0.3672 mL | 0.7345 mL | 1.8362 mL |
4-Methoxybenzaldehyde Related Classifications
HY-Y0740 Related Classifications
Powered by Bioz