AR antagonist 3
Based on 1 Customer Validation
AR antagonist 3 is a potent and selective androgen receptor (AR) antagonist with an IC50 of 0.47 µM. AR antagonist 3 exhibits a dose-dependent decrease of the FRET signal (IC50= 18.05 μM). AR antagonist 3 shows effective inhibition on tumor growth when administered intratumorally.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.96%
- No. CAS: 349573-58-6
- Fòrmula: C15H18N2O3S
- Peso molecular:306.38
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Transcription Factor-Targeted Library
HY-L090
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Nuclear Receptor Compound Library
HY-L126
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Actividad biológica
IC50: 0.47 µM (AR)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| LNCaP | IC50 |
1.42 μM
Compound: T1-12
|
Inhibition of prostate specific antigen expression in human LNCaP cells expressing ARR2PB-eGFP by immunoassay
Inhibition of prostate specific antigen expression in human LNCaP cells expressing ARR2PB-eGFP by immunoassay
|
[PMID: 35077161] |
AR antagonist 3 (compound T1-12) (0.01, 0.1, 1, 10, 100 µM) shows excellent AR antagonistic activity (eGFP IC50= 0.47 μM; PSA IC50= 1.42 μM)[1].
AR antagonist 3 (0.01, 0.1, 1, 10, 100 µM) inhibits the proliferation of LNCaP cells[1].
AR antagonist 3 (0.1, 1, 10 µM; 48 h) reduces the protein expression levels of c-Myc and KLK3[1].
AR antagonist 3 (0.01, 0.1, 1, 10, 100 µM) exhibits a dose-dependent decrease of the FRET signal (IC50= 18.05 μM)[1].
AR antagonist 3 (10 µM; 2 h) reduces the DHT-mediated translocation of the AR into the nucleus in LNCaP cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:LNCaP-ARR2PB-eGFP cells
-
Concentration:0.01, 0.1, 1, 10, 100 µM
-
Incubation Time:
-
Result:Showed excellent AR antagonistic activity (eGFP IC50= 0.47 μM; PSA IC50= 1.42 μM).
-
Cell Line:LNCaP, 22Rv1, C4-2, PC3, DU145 cells
-
Concentration:0.01, 0.1, 1, 10, 100 µM
-
Incubation Time:3 days
-
Result:Inhibited the proliferation of LNCaP cells.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:6 weeks-old male CB17 SCID mice (specificpathogen-free grade), 18-24 g[1]
-
Dosage:2.5 mg/kg
-
Administration:intratumorally injected; week; 25 days
-
Result:Inhibited tumor growth and the final tumor growth inhibition is 65%.
Chemical Information
-
No. CAS 349573-58-6
-
Appearance Solid
-
Peso molecular 306.38
-
Fòrmula C15H18N2O3S
-
Color Light brown to brown
-
SMILES
CN(S(=O)(NC1=CC=C(C=C1)OCC2=CC=CC=C2)=O)C
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (326.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (8.16 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (8.16 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2639 mL | 16.3196 mL | 32.6392 mL | 81.5980 mL |
| 5 mM | 0.6528 mL | 3.2639 mL | 6.5278 mL | 16.3196 mL | |
| 10 mM | 0.3264 mL | 1.6320 mL | 3.2639 mL | 8.1598 mL | |
| 15 mM | 0.2176 mL | 1.0880 mL | 2.1759 mL | 5.4399 mL | |
| 20 mM | 0.1632 mL | 0.8160 mL | 1.6320 mL | 4.0799 mL | |
| 25 mM | 0.1306 mL | 0.6528 mL | 1.3056 mL | 3.2639 mL | |
| 30 mM | 0.1088 mL | 0.5440 mL | 1.0880 mL | 2.7199 mL | |
| 40 mM | 0.0816 mL | 0.4080 mL | 0.8160 mL | 2.0400 mL | |
| 50 mM | 0.0653 mL | 0.3264 mL | 0.6528 mL | 1.6320 mL | |
| 60 mM | 0.0544 mL | 0.2720 mL | 0.5440 mL | 1.3600 mL | |
| 80 mM | 0.0408 mL | 0.2040 mL | 0.4080 mL | 1.0200 mL | |
| 100 mM | 0.0326 mL | 0.1632 mL | 0.3264 mL | 0.8160 mL |
AR antagonist 3 Related Classifications
HY-144127 Related Classifications
Powered by Bioz