ITK-IN-6
Based on 1 Customer Validation
ITK-IN-6 is a highly potent and selective ITK inhibitor (Kd = 387 nM). ITK-IN-6 directly binds to the ITK kinase domain. ITK-IN-6 blocks the release of pro-inflammatory cytokines and the activation and differentiation of Th2 and Th17 cells. ITK-IN-6 improves asthma progression by reducing inflammatory cell infiltration, mucus and IgE production. ITK-IN-6 significantly inhibits airway inflammation and is used in asthma research.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.02%
- CAS 番号: 2616666-32-9
- 分子式: C20H16Cl2N2O4S
- 分子量:451.32
-
保管条件:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Kinase Inhibitor Library
HY-L009
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Highly Selective Inhibitors Library
HY-L158
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
生物活性
ITK-IN-6 (Compound C-161) (24 h) inhibits ITK downstream transcriptional activity in Jurkat-NFAT-Luc stable cell line with an inhibition rate of 62.27 %[1].
ITK-IN-6 (0.07-5 μM, 12 h) C-161 has good safety at effective doses in CD4+ T cells, attenuates Th2 and Th17 differentiation in vitro[1].
ITK-IN-6 (0.15-2.5 μM, 12 h) blocks key factors for T cell activation and inhibits T cell surface activation markers in Jurkat cells[1].
ITK-IN-6 (0.625-2.5 μM, 12 h) specifically inhibits ITK in Jurkat T cells and blocks the cellular and molecular activation potential of T cell receptor proximal signaling, and the expression of CD69 is significantly suppressed[1].
ITK-IN-6 (0.15-2.5 μM) inhibits IL-2 expression at both the transcriptional and protein levels in a dose-dependent manner, with an IC50 of 494 nM in Jurkat cells[1].
ITK-IN-6 (0.625-2.5 μM, 30 min) treatment of Jurkat cells significantly reduces intracellular Ca2+ flux induced by anti-CD3[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Jurkat T cells
-
Concentration:0.625 μM, 1.25 μM, 2.5 μM
-
Incubation Time:12 h
-
Result:Inhibited the phosphorylation of p-PLCγ1, p-IκBα, p-NF-κB, and p-ERK in a dose-dependent manner by C-161, whereas the phosphorylation of upstream ZAP70 remained unchanged.
-
Cell Line:CD4⁺ T cells
-
Concentration:0.07 μM, 0.15 μM, 0.3 μM, 1.25 μM, 2.5 μM, 5 μM
-
Incubation Time:4 days (Th2); 3 days (Th17)
-
Result:Inhibited IL-4 production by Th2 cells in a dose-dependent manner, and no cytotoxic effect was observed.
Significantly reduced the percentage of cells producing IL-17A at a relatively high concentration (1.25 μM), but was accompanied by mild cytotoxicity.
Inhibited the differentiation of naive CD4+ T cells into Th2 cells and significantly reduced the percentage of cells producing IL-17A.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:HDM-induced asthma C57BL/6J mice model (6-8 weeks, 18-20 g)[1]
-
Dosage:10 mg/kg
-
Administration:Intraperitoneal injection (i.p.), 7 to 11 days after HDM sensitization, once a day, one hour before HDM challenge.
-
Result:Reduced the total number of inflammatory cells, eosinophils (EOS), neutrophils (NEU), and B cells in BALF, alleviated inflammatory infiltration and mucus secretion in lung tissue, and decreased serum total IgE and HDM-specific IgE levels.
Reduced CD3⁺ T cell infiltration in lung tissue, decreased the proportion and number of CD4⁺ T cells in the lung, and downregulated the mRNA and protein levels of Th2/Th17-related cytokines (IL-4/IL-5/IL-13/IL-17A) in lung tissue.
Caused no weight loss or death in mice, and resulted in no abnormalities in organ indexes, serum biochemical indicators, or tissue pathology.
化学情報
-
CAS 番号 2616666-32-9
-
性状 Solid
-
分子量 451.32
-
分子式 C20H16Cl2N2O4S
-
Color Off-white to gray
-
SMILES
OC1=C(NS(=O)(C)=O)C=C(NC(C2=CC=C(C3=C(Cl)C(Cl)=CC=C3)C=C2)=O)C=C1
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 100 mg/mL (221.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2157 mL | 11.0786 mL | 22.1572 mL | 55.3931 mL |
| 5 mM | 0.4431 mL | 2.2157 mL | 4.4314 mL | 11.0786 mL | |
| 10 mM | 0.2216 mL | 1.1079 mL | 2.2157 mL | 5.5393 mL | |
| 15 mM | 0.1477 mL | 0.7386 mL | 1.4771 mL | 3.6929 mL | |
| 20 mM | 0.1108 mL | 0.5539 mL | 1.1079 mL | 2.7697 mL | |
| 25 mM | 0.0886 mL | 0.4431 mL | 0.8863 mL | 2.2157 mL | |
| 30 mM | 0.0739 mL | 0.3693 mL | 0.7386 mL | 1.8464 mL | |
| 40 mM | 0.0554 mL | 0.2770 mL | 0.5539 mL | 1.3848 mL | |
| 50 mM | 0.0443 mL | 0.2216 mL | 0.4431 mL | 1.1079 mL | |
| 60 mM | 0.0369 mL | 0.1846 mL | 0.3693 mL | 0.9232 mL | |
| 80 mM | 0.0277 mL | 0.1385 mL | 0.2770 mL | 0.6924 mL | |
| 100 mM | 0.0222 mL | 0.1108 mL | 0.2216 mL | 0.5539 mL |
ITK-IN-6 関連分類
HY-174903 関連分類
Powered by Bioz