AC-262536
Based on 1 publication(s) in Google Scholar
AC-262536 is a selective and non-steroidal androgen receptor modulators (SARMs) with beneficial anabolic effects. AC-262536 exhibits potent agonist activity at the androgen receptor, with an affinity in the low nanomolar range (1-10 nM).
For research use only. We do not sell to patients.
- Purity: 99.49%
- CAS No.: 870888-46-3
- Formula: C18H18N2O
- Molecular Weight:278.35
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Transcription Factor-Targeted Library
HY-L090
-
Nuclear Receptor Compound Library
HY-L126
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Activators Library
HY-L159
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) AC-262536
More
Biological Activity
AC-262536 dose-dependently inhibits dihydroxytestosterone (DHT)-induced proliferation of LNCaP. The effects are significant with 100 nM AC-262536 (%inhibition 47.2±12.2), and reaches a plateau with 1 μM treatment (%inhibition 50.7±7.6). Thus, AC-262536 can act as a functional antagonist in prostate cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley rats (200-225 g)[1]
-
Dosage:3, 10 and 30 mg/kg
-
Administration:Administered subcutaneously; once daily for 14 consecutive days
-
Result:Significantly decreased LH levels by about 40% at the 3 mg/kg dose.
The ED50 was determined to be 2.8 mg/kg.
At the 10 and 30 mg/kg doses, the effects of AC-262536 were significantly stronger than Testosterone Propionate (TP) : 1.91±0.32 ng/mL and 1.53±0.34 ng/mL vs. 3.12±0.69 ng/mL, respectively.
Chemical Information
-
CAS No. 870888-46-3
-
Appearance Solid
-
Molecular Weight 278.35
-
Formula C18H18N2O
-
Color White to off-white
-
SMILES
O[C@@H]1C[C@H]2N(C3=CC=C(C#N)C4=C3C=CC=C4)[C@@H](C1)CC2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Rapid Commun Mass Spectrom
Electrospray ionisation mass spectrometry (ESI-MS) adduct formation by mobile phase additives: A case study using nitrile functional groups containing selective androgen receptor modulators (SARMs). [Abstract]2023 Jul 30;37(14):e9530. PMID: 37125537
Solvent & Solubility
DMSO : 50 mg/mL (179.63 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.56 mg/mL (2.01 mM); Clear solution
This protocol yields a clear solution of ≥ 0.56 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.6 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5926 mL | 17.9630 mL | 35.9260 mL | 89.8150 mL |
| 5 mM | 0.7185 mL | 3.5926 mL | 7.1852 mL | 17.9630 mL | |
| 10 mM | 0.3593 mL | 1.7963 mL | 3.5926 mL | 8.9815 mL | |
| 15 mM | 0.2395 mL | 1.1975 mL | 2.3951 mL | 5.9877 mL | |
| 20 mM | 0.1796 mL | 0.8981 mL | 1.7963 mL | 4.4907 mL | |
| 25 mM | 0.1437 mL | 0.7185 mL | 1.4370 mL | 3.5926 mL | |
| 30 mM | 0.1198 mL | 0.5988 mL | 1.1975 mL | 2.9938 mL | |
| 40 mM | 0.0898 mL | 0.4491 mL | 0.8981 mL | 2.2454 mL | |
| 50 mM | 0.0719 mL | 0.3593 mL | 0.7185 mL | 1.7963 mL | |
| 60 mM | 0.0599 mL | 0.2994 mL | 0.5988 mL | 1.4969 mL | |
| 80 mM | 0.0449 mL | 0.2245 mL | 0.4491 mL | 1.1227 mL | |
| 100 mM | 0.0359 mL | 0.1796 mL | 0.3593 mL | 0.8981 mL |
Powered by Bioz